Scribd
Upload
114 views

MPC

mpc

Uploaded by

cchung147554
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
114 views

MPC

mpc

Uploaded by

cchung147554
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

S464G1007

Addressable Manual Pull Station


General
6643hcov1.j

The S464G1007 is a state-of-the-art, dual-action (i.e., requires


two motions to activate the station) pull station that includes an
addressable interface for use with Honeywells compatible
Intelligent Fire Alarm Control Panels Because the S464G1007
is addressable, the control panel can display the exact location
of the activated manual station. This leads fire personnel
quickly to the location of the alarm.

Features
Maintenance personnel can open station for inspection and
address setting without causing an alarm condition.
Built-in bicolor LED, which is visible through the handle of
the station, flashes in normal operation and latches steady
red when in alarm.
Handle latches in down position and the word ACTIVATED
appears to clearly indicate the station has been operated.
Captive screw terminals wire-ready for easy connection to
SLC loop (accepts up to 12 AWG/3.25 mm wire).
Can be surface mounted (with SB-10 or SB-I/O) or semiflush mounted. Semi-flush mount to a standard singlegang, double-gang, or 4" (10.16 cm) square electrical box.
Smooth dual-action design.
Meets ADAAG controls and operating mechanisms guidelines (Section 4.1.3[13]); meets ADA requirement for 5 lb.
maximum activation force.
Highly visible.
Attractive shape and textured finish.
Key reset.
Includes Braille text on station handle.
Optional trim ring (BG12TR).
Meets UL 38, Standard for Manually Actuated Signaling
Boxes.
Up to 99 S464G1007 stations per loop on CLIP protocol
loops.
Up to 159 S464G1007 stations per loop on FlashScan
protocol loops.
Dual-color LED blinks green to indicate normal on
FlashScan systems.

Construction
Shell, door, and handle are molded of durable polycarbonate
material with a textured finish.

Specifications

Shipping Weight: 9.6 oz. (272.15 g)


Normal operating voltage: 24 VDC.
Maximum SLC loop voltage: 28.0 VDC.
Maximum SLC standby current: 375 A.
Maximum SLC alarm current: 5 mA.
Temperature Range: 32F to 120F (0C to 49C)
Relative Humidity: 10% to 93% (noncondensing)
For use indoors in a dry location (Note: Use
S464F1008WP for outdoor applications; see 85-3055.)

The S464G1007
Addressable Manual Pull Station

Installation
The S464G1007 will mount semi-flush into a single-gang, double-gang, or standard 4" (10.16 cm) square electrical outlet
box, or will surface mount to the model SB-10 or SB-I/O surface backbox. If the S464G1007 is being semi-flush mounted,
then the optional trim ring (BG12TR) may be used. The
BG12TR is usually needed for semi-flush mounting with 4"
(10.16 cm) or double-gang boxes (not with single-gang boxes).

Operation
Pushing in, then pulling down on the handle causes it to latch
in the down/activated position. Once latched, the word ACTIVATED (in bright yellow) appears at the top of the handle,
while a portion of the handle protrudes from the bottom of the
station. To reset the station, simply unlock the station with the
key and pull the door open. This action resets the handle; closing the door automatically resets the switch.
Each manual station, on command from the control panel,
sends data to the panel representing the state of the manual
switch. Two rotary decimal switches allow address settings
(1 159 on FlashScan systems, 1 99 on CLIP systems).

Architectural/Engineering
Specifications
Manual Fire Alarm Stations shall be non-coded, with a keyoperated reset lock in order that they may be tested, and so
designed that after actual Emergency Operation, they cannot
be restored to normal except by use of a key. An operated station shall automatically condition itself so as to be visually
detected as activated. Manual stations shall be constructed of
red-colored polycarbonate material with clearly visible operating instructions provided on the cover. The word FIRE shall
appear on the front of the stations in white letters, 1.00 inches
(2.54 cm) or larger. Stations shall be suitable for surface
mounting on matching backbox SB-10 or SB-I/O; or semi-flush
mounting on a standard single-gang, double-gang, or
4" (10.16 cm) square electrical box, and shall be installed
within the limits defined by the Americans with Disabilities Act
(ADA) or per national/local requirements. Manual Stations
shall be Underwriters Laboratories listed.
Manual stations shall connect with two wires to one of the control panel SLC loops. The manual station shall, on command
from the control panel, send data to the panel representing the

state of the manual switch. Manual stations shall provide


address setting by use of rotary decimal switches.

NOTE: For S464 series conventional, non-addressable models


including weatherproof S464F1008WP, see 85-3055.

The loop poll LED shall be clearly visible through the front of
the station. The LED shall flash while in the normal condition,
and stay steadily illuminated when in alarm.

Agency Listings and Approvals

Product Line Information


S464G1007: Dual-action addressable pull station. Includes
key locking feature. (Listed for Canadian and non-Canadian
applications.)
SB-10: Surface backbox; metal.
SB-I/O: Surface backbox; plastic.
BG12TR: Optional trim ring.
17051: Keys, set of two.
NY-Plate: New York City trim plate.

In some cases, certain modules or applications may not be


listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
UL/ULC Listed: S749 (listed for Canadian and non-Canadian applications).
MEA: 67-02-E Vol. II.
CSFM: 7150-1130:0209.
FDNY: COA #6098, COA #6100.
FM Approved.
Patented: U.S. Patent No. D428,351; 6,380,846; 6,314,772;
6,632,108.

This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific
applications or anticipate all requirements. All specifications are subject to change without notice.
FlashScan is a trademark and Eclipse is a registered trademark of Honeywell International Inc.
2012 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited.

Automation and Control Solutions


Honeywell International Inc.

Honeywell Limited-Honeywell Limite

1985 Douglas Drive North

35 Dynamic Drive

Golden Valley, MN 55422

Scarborough, Ontario M1V 4Z9

www.honeywell.com

74-3365-6 Rev. 04-12


April 2012
Made in the U.S.A.
U.S. Registered Trademark
2012 Honeywell International Inc.
Page 2 of 2

You might also like