Scribd
Upload
272 views

Audio Processing Quiz 1

This document contains a 16 question audio processing quiz that covers topics such as: - The definition of rarefaction as it relates to sound waves - The octave relationship between frequencies of 440 Hz and 880 Hz - How mixing two sounds with an amplitude of -3 dB would result in a sound with an amplitude of approximately -6 dB - That the Nyquist theorem states the sampling rate must be at least twice the highest sampled frequency

Uploaded by

Tony Brooks
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
272 views

Audio Processing Quiz 1

This document contains a 16 question audio processing quiz that covers topics such as: - The definition of rarefaction as it relates to sound waves - The octave relationship between frequencies of 440 Hz and 880 Hz - How mixing two sounds with an amplitude of -3 dB would result in a sound with an amplitude of approximately -6 dB - That the Nyquist theorem states the sampling rate must be at least twice the highest sampled frequency

Uploaded by

Tony Brooks
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Audio Processing Quiz 1

1. When an object vibrates, it creates periodic increases in air pressure called:


a) resonance b) harmony c) compression d) rarefaction
2. The pair of frequencies that represents the pitch interval of an octave is:
a) 440 Hz and 660 Hz b) 842 Hz and 843 Hz c) 100 Hz and 108 Hz d) 467 Hz and
934 Hz
3. In an audio editing program, if I mix two sounds, each having an amplitude of -3
dB:
a) there is a high likelihood that they will cancel each other out entirely
b) the resulting sound will have an amplitude of approximately -6 dB
c) the loudness will be the same, but their frequencies could exceed the Nyquist rate
d) the amplitude of the resulting sound might be greater than 0 dB, causing clipping
4. The sampling rate refers to:
a) how many times per second the sound wave repeats
b) how many bits are used per sample of the sound
c) how many numerical samples of the analog sound are taken each second
d) how many samples of delay there are between the input and the output
5. The Nyquist theorem states that:
a) the sampling rate must be at least half the highest sampled frequency
b) the sampling rate must be at least twice the highest sampled frequency
c) the sampling rate must be at least half the Nyquist frequency
d) the sampling rate must be at least as great as the highest sampled frequency
6. The word timbre is used to describe:
a) the capacitance of a microphone, determined by its mass
b) the tone color of an instrument, determined by its spectrum
c) the effect that occurs when two sine tones destructively interfere
d) a regularly repeating fluctuation of pitch, also known as vibrato
7. An immediate shift of amplitude from non-zero to 0 will usually be heard as: a) a
click b) an aliased frequency c) sustained low-level pink noise d) a drop in perceived
frequency
8. Using a lowpass filter on an audio signal: a) is an example of frequency modulation
b) removes the low frequencies
c) is known as an LFO
d) diminishes the high frequencies
9. If an amplitude of 1 is used as a 0dB reference, the amplitude signified by "-6
dB" is:
a) 0.6
b) 0.5
c) 0.4
d) 0.166667



10. In digital recording, a lowpass filter is used before the analog-to-digital
converter to:
a) reduce low-frequency rumble (ambient room noise)
b) prevent distortion of the signal due to clipping
c) improve the precision of quantization
d) prevent aliasing

11. The sampling rate of compact disc recordings is:
a) 44,100 Hz
b) 40,000 Hz
c) 31,250 Hz
d) 10,000 Hz

12. Most real-world sounds that we perceive as having a definite pitch:
a) actually contain multiple frequencies in random relationships
b) contain a frequency that produces a timbre characterized as "inharmonic"
c) contain frequencies that are whole number multiples of a fundamental
frequency d) contain energy at only one specific frequency, permitting us to
identify its pitch

13. Aliasing occurs when:
a) the amplitude of the sound surpasses the electrical capability of the converter
b) a sound is heard in one ear, then a short time later in the other ear with lower
volume
c) the sound contains frequencies that exceed the Nyquist frequency
d) a moving sound source is panned linearly between two speakers

14. The range of frequencies that humans can hear is approximately:
a) 0 to 22,050 Hz
b) 100 to 1,000 Hz
c) 20 to 20,000 Hz
d) 0 to 32,767 Hz

15. A sound file format that can provide fully CD-quality audio is:
a) MP3
b) AAC
c) AIFF
d) GSM EFR

16. If an audio signal is shown in the computer to have a peak amplitude of
0.125, the number of decibels it can it be amplified in the program without
clipping is:
a) 6 dB
b) 8 dB
c) 18 dB
d) 48 dB

You might also like