0% found this document useful (2 votes)

668 views

Lab 1 (wk2 and 3) - Investigating Existing Network Devices

The document describes a lab activity where a student is tasked with documenting an existing campus network by using router and switch commands over Telnet to discover information about network devices. The student is provided the administrator's PC and login credentials for the routers and switches. The student must access each device, run show commands to learn its configuration, and document the findings.

Uploaded by

Anonymous 17ZoJO

Available Formats

Download as DOC, PDF, TXT or read online on Scribd

0% found this document useful (2 votes)

668 views

Lab 1 (wk2 and 3) - Investigating Existing Network Devices

Uploaded by

Anonymous 17ZoJO

Available Formats

Download as DOC, PDF, TXT or read online on Scribd

You are on page 1/ 9

CCE3060 Network Analysis and Troubleshooting

Student Name:

Student Number:

Lab 1 - Investigating Existing Network Devices

Objective

Use router and switch commands to obtain information about an existing network.

Background / Preparation
You have been given the task of documenting a large campus network. When you arrive at the site you
discover that the network administrator is not available and he has the only keys to the wiring closets and the
cabinets containing the existing network documentation. Since information on the network is needed as soon
as possible, you decide to discover as much information as possible using router and switch commands.
You are given access to the administrators PC and are told that the Telnet access password for all devices is
cisco and the password to enter privileged exec mode is class.

Step 1: Discover and document the first device.

a. Access the Admin PC and issue the ipconfig command from the command prompt to discover the
default gateway.
b. Telnet to the IP address of the gateway device and enter privileged exec mode using the passwords
given above.
c.

Issue IOS commands such as show running-config, show ip route, show interfaces, show ip
interface brief, show version and other commands to learn about the device.

d. Issue IOS commands such as show cdp neighbors and show cdp neighbors detail to discover
information about connected devices. It may take a few minutes for the network to converge. If you do
not see any neighboring devices initially, repeat the commands until you do.
e. Document the information you gather in the appropriate table below.
f.

Close the Telnet session by issuing the exit command.

Step 2: Discover the remaining devices.

a. Packet Tracer works best when you successfully ping a device before attempting to Telnet to it. Issue
the ping command to the IP address of one of the devices you discovered in Step 1. Repeat the ping
command until it succeeds.
b. Telnet to the IP address of the device and repeat the process in Step 1 to document the device.
c.

Do not overuse the resources of Packet Tracer, do not Telnet from device to device. Always exit to the
command prompt before accessing the next device.

d. Repeat the process until all devices in the network are discovered and documented.
e. As you work, sketch out a diagram of the network devices and their interconnections.

Page 1 of 9

CCE3060 Network Analysis and Troubleshooting

Device Tables:
Router
Hostname _________________________
Model _________________________ IOS version ______________________________
Interface

IP Address

Subnet Mask

Connects to Device

Connects to Interface

Router
Hostname _________________________
Model _________________________ IOS version ______________________________
Interface

IP Address

Subnet Mask

Connects to Device

Connects to Interface

Router
Hostname _________________________
Model _________________________ IOS version ______________________________
Interface

IP Address

Subnet Mask

Connects to Device

Connects to Interface

Router
Hostname _________________________
Model _________________________ IOS version ______________________________
Interface

IP Address

Subnet Mask

Connects to Device

Connects to Interface
Page 2 of 9

CCE3060 Network Analysis and Troubleshooting

Switch
Hostname _________________________
Model _________________________ IOS version ______________________________
IP Address _______________________ Subnet Mask __________________________
Default Gateway ________________________
Trunk Ports

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Page 3 of 9

CCE3060 Network Analysis and Troubleshooting

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Switch
Page 4 of 9

CCE3060 Network Analysis and Troubleshooting

Hostname _________________________
Model _________________________ IOS version ______________________________
IP Address _______________________ Subnet Mask __________________________
Default Gateway ________________________
Trunk Ports

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Switch
Hostname _________________________
Page 5 of 9

CCE3060 Network Analysis and Troubleshooting

Model _________________________ IOS version ______________________________
IP Address _______________________ Subnet Mask __________________________
Default Gateway ________________________
Trunk Ports

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Switch
Hostname _________________________
Model _________________________ IOS version ______________________________
Page 6 of 9

CCE3060 Network Analysis and Troubleshooting

IP Address _______________________ Subnet Mask __________________________
Default Gateway ________________________
Trunk Ports

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

CCE3060 Network Analysis and Troubleshooting

Default Gateway ________________________
Trunk Ports

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Connects to Device

Connects to Interface

Active Access Ports

VLAN Number

VLAN Name

Network Diagram:

Page 8 of 9

CCE3060 Network Analysis and Troubleshooting

Step 3: Reflection
a. We used this technique to discover and document a campus LAN. Would the same technique work
for an enterprise network that included WAN links?
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
b. Could we use this technique in a network that included routers and switches from a manufacturer
other than Cisco? Why or why not?
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________

Page 9 of 9