Scribd
Upload
117 views

Oracle Client Install Guide

1. Follow the Oracle 10g Client installation instructions on page 2 to download and install the Oracle 10g client software. 2. Configure Oracle for SiteManager by copying the sqlnet.ora and ldap.ora files to the correct directory, as described on page 19. 3. Configure ODBC based on your operating system - pages 20-23 provide instructions for Windows XP, Windows 7 32-bit, and Windows 7 64-bit systems. 4. Test your VPN connection using the tnsping command shown on page 28.

Uploaded by

dubravko_akmacic
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
117 views

Oracle Client Install Guide

1. Follow the Oracle 10g Client installation instructions on page 2 to download and install the Oracle 10g client software. 2. Configure Oracle for SiteManager by copying the sqlnet.ora and ldap.ora files to the correct directory, as described on page 19. 3. Configure ODBC based on your operating system - pages 20-23 provide instructions for Windows XP, Windows 7 32-bit, and Windows 7 64-bit systems. 4. Test your VPN connection using the tnsping command shown on page 28.

Uploaded by

dubravko_akmacic
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 31

Oracle 10g Client Install Guide

Contents
Oracle 10g Client Install......................................................................................................................................2.
Oracle Setup for SiteManager............................................................................................................................19
ODBC Configuration for Windows XP and Windows 7 (32-bit)....................................................................20
ODBC Configuration for Windows 7 (64-bit)...................................................................................................23
Test From A VPN Connection.............................................................................................................................28
Please be aware that Oracle 10g (recommended) or Oracle 9i is required for SiteManager 3.11a, Oracle 8i is not
supported. Windows XP and Windows 7 are both supported starting with this version.
SiteManager 3.11a is a 32-bit application. Therefore Windows 7 (64-bit) requires the 32-bit version of Oracle
Client and configuration with the 32-bit version of the ODBC Data Source Administrator.
TDOT does not manage non-TDOT computers and does not have sufficient security rights to administer shared
software like Oracle on non-TDOT computers. However, because Oracle 9i or 10g is required to run
SiteManager, we have provided a convenient link to download the Oracle 10g install program and this guide for
configuring Oracle to work with SiteManager.
Note: Oracle 10g and Oracle 10.2.0.1.0 are two names for the same software and are used interchangeably.
SiteManager setup guides are located on the TDOT Construction SiteManager website:
http://www.tdot.state.tn.us/construction/SiteManager.htm

1. Follow the Oracle 10g Client Install directions on page 2.


2. Setup Oracle for SiteManager using the directions on page 19
3. Configure ODBC using the instructions that match your operating
system on page 20 or page 23
4. If you will use VPN to connect to TDOT, test your connection using
the instructions on page 28

Page 1 of 31

Oracle 10g Client Installation


To install Oracle 10g client you must login as an administrator on the machine.
To download the client from TDOT

Extract and create folder client_10201

Page 2 of 31

After completion Double click on the setup.exe to install Oracle 10g client. A screen will come up titled
Oracle Universal Installer Choose Next to install the client.

Page 3 of 31

Page 4 of 31

Check Custom and Click on Next

Page 5 of 31

Give the Name and Path like shown in the screen..and Click Next

Page 6 of 31

Page 7 of 31

Check mark for the below features(Shown in the above screens):


Oracle Client 10.2.0.1.0
- Oracle Database Utilities 10.2.0.1.0
- SQL*Plus 10.2.0.1.0
- Oracle Windows Interfaces 10.2.0.1.0
- Oracle ODBC Driver 10.2.0.1.0
- Oracle Programmer 10.2.0.1.0
- Oracle Net 10.2.0.1.0

Then Click NEXT

Page 8 of 31

Then Click NEXT

Page 9 of 31

Click On Install

Page 10 of 31

Installation will take few minutes to complete

Page 11 of 31

Page 12 of 31

Click on Cancel

Page 13 of 31

Click on Yes

Page 14 of 31

Click on OK

Page 15 of 31

Click on Cancel

Page 16 of 31

Click on OK

Page 17 of 31

Click on Yes
Then installation has been completed successfully.

Page 18 of 31

Oracle Setup for Site Manager


***Copy C:\client_10201\client sqlnet.oraAnd ldap.ora
See Page 29 for how to get these files.

TO: C:\Oracle\product\10.2.0\client\NETWORK\ADMIN folder

Page 19 of 31

ODBC Configuration for Windows XP and Windows 7 (32-bit)


ODBC Settings:
Navigate to: start > Control Panel > Administrator Tools> Data Sources (ODBC)> System DSN
***Remove the any old - PSMR ODBC from previous versions****
On the Create New Data Source screen.

Do this test in a VPN session


System DNS>ADD>

Use Oracle in OraClient10g_home or the 10g from your oracle home path.

Page 20 of 31

Test Connection
test
test

Page 21 of 31

If your get invalid username/password this is okay the oracle is set up correctly.

Page 22 of 31

ODBC Configuration for Windows 7 (64-bit)


SiteManager Client 3.11a requires that a 32-bit version of Oracle Client (10g is recommended) must be installed
on the Windows 7 (64-bit). Windows 7 (64-bit) comes with both the 32-bit and 64-bit ODBC Administrator. The
ODBC connection for the SiteManager Client must be configured in the 32-bit ODBC Administrator.
This section of the installation guide will walk you through how to setup the ODBC connection in the 32-bit
ODBC Administrator for New SiteManager Client installs.
1.

Select the Start Button

2.

Open Administrative Tools, Right Click on Data Sources (ODBC), and Select Properties.

Page 23 of 31

3.
Bit).

Rename the Data Source on the General Tab of the Properties Dialog Box to Data Source (ODBC 32

Page 24 of 31

4.

Select the Shortcut Tab on the Properties Dialog Box.

5.

Edit the Target Field with %windir%\SysWOW64\odbcad32.exe.


Page 25 of 31

6.

Edit the Start in Field with %windir%\SysWOW64.

7.

Select OK to close the Properties Dialog Box.

Note: The 64-bit version of the ODBC Data Source Administrator will have the Target set to %windir
%\System32\odbcad32.exe and the Start in set to %windir%\System32.

Page 26 of 31

8.

Open the ODBC Data Source Administrator from Administrative Tools

9.

Select the Drivers Tab, scroll down until you see Oracle in OraClient X

a.

This will indicate to you that the correct ODBC Administrator is now being used.

Page 27 of 31

10.

Select the Systems DSN

11.

Add a new ODBC for PSMR.

This completes the 32-bit ODBC setup for the 3.11a version of SiteManager Client on Windows 7 (64-bit).

Page 28 of 31

Test from a VPN connection:


Start/Run open CMD as below:\

1.

C:\> tnsping psmr


Look for OKmessage as seen below. This verifies database server is up.

Page 29 of 31

** If you do not get the OK get the sqlnet.ora and ldap.ora files in Utilites.zip

Page 30 of 31

Delete the install and the ZIP files from your pc c:\client_10201 if the test is okay.

Page 31 of 31

You might also like