Scribd
Upload
207 views4 pages

Classic" Tube Type - Ultra-Linear Output Transformers

This document provides specifications for a series of tube audio output transformers for push-pull amplifier circuits. It lists various transformer models with different power ratings and impedance specifications and suggests compatible tube types for each. Connector diagrams are also included.

Uploaded by

Bruce Kamperman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
207 views4 pages

Classic" Tube Type - Ultra-Linear Output Transformers

This document provides specifications for a series of tube audio output transformers for push-pull amplifier circuits. It lists various transformer models with different power ratings and impedance specifications and suggests compatible tube types for each. Connector diagrams are also included.

Uploaded by

Bruce Kamperman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Push - Pull Audiophile - Output (1608-1650 Series)

Tube Audio

PUSH - PULL
"CLASSIC" TUBE TYPE - ULTRA-LINEAR
OUTPUT TRANSFORMERS
Designed for push-pull tube output circuits.
Enclosed (shielded), 4 slot, above chassis Type "X" mounting.
Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz) minimum. Except the
1650E (70 Hz. to 30 Khz. +/- 1 db max. - ref. 1 Khz.)
Insulated flexible leads 8" min.
Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet
specifications (see hook-up schematics).
Negative feedback circuits can be utilized by connecting to the Green & Black wires - 4 Ohm secondary (this
winding is always engaged on all load configurations).
All units include 40% screen taps for Ultra-Linear operation (if desired).
Typical applications - Push-Pull: triode, Ultra-Linear pentode, and tetrode connected audio output.
For our NEW improved "easy hook-up" secondary series - see our 1608-1650 "A" series.
For the "ultimate" in Push-Pull output see our line of epoxy potted output transformers (1650 potted series).
Part
Number
1608
1609
1615
1620
1650F
1645
1650H
1650K
1650N
1650P
1650R
1650T
1650W

Audio
Watts
(RMS)
10
10
15
20
25
30
40
50
60
60
100
120
280

Dimensions (Inches)

Primary
Max. DC
Impedance Per Side

Secondary
Impedance

E
+/- 1/16

G
Slot

8,000 C.T.
10,000 C.T.
5,000 C.T.
6,600 C.T.
7,600 C.T.
5,000 C.T.
6,600 C.T.
3,400 C.T.
4,300 C.T.
6,600 C.T.
5,000 C.T.
1,900 C.T.
1,900 C.T.

4-8-16
4-8-16
4-8-16
4-8-16
4-8-16
4-8-16-70 V
4-8-16
4-8-16
4-8-16
4-8-16
4-8-16
4-8-16
4-8-16

2.50
2.50
2.50
2.50
2.50
2.50
3.13
3.13
3.13
3.13
3.75
3.75
4.38

2.75
2.75
3.25
3.50
3.50
3.75
4.00
4.00
4.25
4.25
4.25
4.50
7.50

3.06
3.06
3.06
3.06
3.06
3.06
3.81
3.81
3.81
3.81
4.56
4.56
5.25

2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
3.00
3.00
3.50

1.69
1.69
2.19
2.44
2.44
2.69
2.69
2.69
2.94
2.94
3.06
3.31
5.88

.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38

100 ma.
100 ma.
100 ma.
158 ma.
128 ma.
128 ma.
200 ma.
318 ma.
318 ma.
200 ma.
318 ma.
403 ma.
806 ma.

CANADA

2.5
2.5
3.25
3.5
4
4.5
6.5
7
8
8
12
14
28

EUROPE

Guelph, Ontario (519) 822-2960


St. Laurent, Quebec (514) 343-9010

www.hammondmfg.com

Cheektowaga, NY (716) 630-7030

90

USA

Wt.
Lbs.

Basingstoke, UK 01256 812812

AUSTRALIA

Queenstown, Australia 61-8-8240-2244

Push - Pull Audiophile - Output (1608-1650 Series)


Suggested Tube Types
Part
Number
1608
1609
1615
1620
1650F
1645
1650H
1650K
1650N
1650P
1650R
1650T
1650W

Audio Watts
(RMS)
10
10
15
20
25
30
40
50
60
60
100
120
280

Primary
Impedance
8,000 C.T.
10,000 C.T.
5,000 C.T.
6,600 C.T.
7,600 C.T.
5,000 C.T.
6,600 C.T.
3,400 C.T.
4,300 C.T.
6,600 C.T.
5,000 C.T.
1,900 C.T.
1,900 C.T.

Operation

Tube Types

Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull Par. (4 Tubes)
Push-Pull Par. (2 or 4 Tubes)
Push-Pull (2 Tubes)
Push-Pull Par. (2 or 4 Tubes)
Push-Pull Par. (4 or 6 Tubes)
Push-Pull Par. (6 or 8 Tubes)

6AQ5, 6V6, 6BQ5, EL84, SV83


6AQ5, 6V6, 6BQ5, EL84, SV83
2A3, 6A3, 6AQ5, 6B4G, 6L6, 6V6
6AQ5, 6L6, 6V6
6L6GC, 6V6, 807, 5881, EL34
6L6GC, 6V6, 807, 5881, EL34
6L6GC, 807, 5881, EL34
6L6GC, 807, 5881, EL34, 6146B, 6550B
6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88
6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88
807, 5881, EL34, 6146B, 6550B, KT88
6L6GC, 5881, EL34, 6550B, KT88
6L6GC, 5881, EL34, 6550B, KT88

Note: The above examples of possible combinations are to help you narrow down the choices of transformers for your favorite tube types. How
you operate the tubes (push-pull, push-pull parallel, ultra-linear, class, B+, bias, operating points, etc.) will change optimum plate to plate load
impedance. Only a few of the most popular tubes are shown. As more tubes become available we will add them to the list. A tube manual or tube
manufacturer's technical data sheets should be consulted first, before making a decision on a proper output transformer.

Schematic - All Parts Except 1645


Blu
(Plate)

Schematic - 1645 Only


Blu
(Plate)

Yel (8 Ohm)

Blu/Yel
(Screen Gr)

Blk/Yel (0 Ohm)

Red B+

Blk/Yel (0 Ohm)

Red B+
Grn (4 Ohm)

Brn/Yel
(Screen Gr)

Grn (4 Ohm)

Brn/Yel
(Screen Gr)

Blk (0 Ohm)

Brn
(Plate)

PRI

Tube Audio

Grn/Yel (4 Ohm)

Blu/Yel
(Screen Gr)

White (70 V)
Yel (8 Ohm)
Grn/Yel (4 Ohm)

Blk (0 Ohm)

Brn
(Plate)

SEC

PRI

SEC

Note: To hook up 4/8/16 ohm secondary loads, see "Secondary Hook-Up Data" below. To hook up secondary to
70V loads, jumper Blk/Yel wire to Grn wire. Connect load
to Blk and White wires.

Secondary Hook-Up Data


Yel
Grn/Yel
Blk/Yel

Yel
Grn/Yel

Yel
Grn/Yel

4 Ohm

Blk/Yel

8 Ohm

Blk/Yel

Grn

Grn

Grn

Blk

Blk

Blk

16 Ohm

NOTE: Due to the unique interleaving of the windings BOTH secondary windings must be engaged (as shown) to meet specifications

EUROPE

Basingstoke, UK 01256 812812

AUSTRALIA

Queenstown, Australia 61-8-8240-2244

CANADA

www.hammondmfg.com

Guelph, Ontario (519) 822-2960


St. Laurent, Quebec (514) 343-9010

91

Cheektowaga, NY (716) 630-7030

USA

Push - Pull Audiophile - Output (1608-1650 "A" Series)

Tube Audio

PUSH - PULL "EASY HOOK-UP"


"CLASSIC" TUBE TYPE - ULTRA-LINEAR
OUTPUT TRANSFORMERS
NEW & Improved version of our 1608-1650 series output transformers (re-designed secondaries for easy hookup of secondary loads)
Designed for push-pull tube output circuits.
Enclosed (shielded), 4 slot, above chassis Type "X" mounting.
Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz) minimum. Except the
1650E (70 Hz. to 30 Khz. +/- 1 db max. - ref. 1 Khz.)
Insulated flexible leads 8" min.
All units (except the 1650G) include 40% screen taps for Ultra-Linear operation (if desired).
Typical applications - Push-Pull: triode, Ultra-Linear pentode, and tetrode connected audio output. The 1650G
does NOT have primary screen taps and will not support "Ultra-Linear" applications.
Part
Number
1608A
1609A
1615A
1650E
1620A
1650FA
1645A
1650G
1650HA
1650KA
1650NA
1650PA
1650RA
1650TA
1650WA

Audio
Watts
(RMS)
10
10
15
15
20
25
30
35
40
50
60
60
100
120
280

Primary
Max. DC
Impedance Per Side
8,000 C.T.
10,000 C.T.
5,000 C.T.
8,000 C.T.
6,600 C.T.
7,600 C.T.
5,000 C.T.
6,600 C.T.
6,600 C.T.
3,400 C.T.
4,300 C.T.
6,600 C.T.
5,000 C.T.
1,900 C.T.
1,900 C.T.

100 ma.
100 ma.
100 ma.
100 ma.
158 ma.
128 ma.
128 ma.
200 ma.
200 ma.
318 ma.
318 ma.
200 ma.
318 ma.
403 ma.
806 ma.

Dimensions (Inches)

Secondary
Impedance

E
+/- 1/16

G
Slot

4-8-16
4-8-16
4-8-16
4-8-16
4-8-16
4-8-16
4-8-16-70 V
3.5/8/16/250/500
4-8-16
4-8-16
4-8-16
4-8-16
4-8-16
4-8-16
4-8-16

2.50
2.50
2.50
2.50
2.50
2.50
2.50
3.13
3.13
3.13
3.13
3.13
3.75
3.75
4.38

2.75
2.75
3.25
3.25
3.50
3.50
3.75
3.75
4.00
4.00
4.25
4.25
4.25
4.50
7.50

3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.81
3.81
3.81
3.81
3.81
4.56
4.56
5.25

2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
3.00
3.00
3.50

1.69
1.69
2.19
2.50
2.44
2.44
2.69
2.25
2.69
2.69
2.94
2.94
3.06
3.31
5.88

.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38
.203 x .38

CANADA

2.5
2.5
3.25
3.5
3.5
4
4.5
5
6.5
7
8
8
12
14
28

EUROPE

Guelph, Ontario (519) 822-2960


St. Laurent, Quebec (514) 343-9010

www.hammondmfg.com

Cheektowaga, NY (716) 630-7030

92

USA

Wt.
Lbs.

Basingstoke, UK 01256 812812

AUSTRALIA

Queenstown, Australia 61-8-8240-2244

Push - Pull Audiophile - Output (1608-1650 "A" Series)


Suggested Tube Types
Part
Number
1608A
1609A
1615A
1650E
1620A
1650FA
1645A
1650G
1650HA
1650KA
1650NA
1650PA
1650RA
1650TA
1650WA

Audio Watts
(RMS)
10
10
15
15
20
25
30
35
40
50
60
60
100
120
280

Primary
Impedance
8,000 C.T.
10,000 C.T.
5,000 C.T.
8,000 C.T.
6,600 C.T.
7,600 C.T.
5,000 C.T.
6,600 C.T.
6,600 C.T.
3,400 C.T.
4,300 C.T.
6,600 C.T.
5,000 C.T.
1,900 C.T.
1,900 C.T.

Operation

Tube Types

Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull (2 Tubes)
Push-Pull Par. (4 Tubes)
Push-Pull Par. (2 or 4 Tubes)
Push-Pull (2 Tubes)
Push-Pull Par. (2 or 4 Tubes)
Push-Pull Par. (4 or 6 Tubes)
Push-Pull Par. (6 or 8 Tubes)

6AQ5, 6V6, 6BQ5, EL84, SV83


6AQ5, 6V6, 6BQ5, EL84, SV83
2A3, 6A3, 6AQ5, 6B4G, 6L6, 6V6
6AQ5, 6V6, 6BQ5, EL84, SV83
6AQ5, 6L6, 6V6
6L6GC, 6V6, 807, 5881, EL34
6L6GC, 6V6, 807, 5881, EL34
6L6GC, 807, 5881, EL34
6L6GC, 807, 5881, EL34
6L6GC, 807, 5881, EL34, 6146B, 6550B
6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88
6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88
807, 5881, EL34, 6146B, 6550B, KT88
6L6GC, 5881, EL34, 6550B, KT88
6L6GC, 5881, EL34, 6550B, KT88

Note: The above examples of possible combinations are to help you narrow down the choices of transformers for your favorite tube types. How
you operate the tubes (push-pull, push-pull parallel, ultra-linear, class, B+, bias, operating points, etc.) will change optimum plate to plate load
impedance. Only a few of the most popular tubes are shown. As more tubes become available we will add them to the list. A tube manual or tube
manufacturer's technical data sheets should be consulted first, before making a decision on a proper output transformer.

Schematic
All Parts Except 1645A, 1650E & 1650G
Blu
(Plate)

White (16 Ohm)

Blu/Yel
(Screen Gr)

Blu/Yel
(Screen Gr)

Yel (8 Ohm)

Red B+

White (16 Ohm)

Red B+
Grn (4 Ohm)

Brn/Yel
(Screen Gr)
Brn
(Plate)

Black (0 Ohm)

PRI

Schematic - 1650E Only

Red/Yel (500 Ohm)


Blu
(Plate)

Blk/Yel (250 Ohm)


Yel (16 Ohm)

Blk/Grn (8 Ohm)
Red B+

Red B+

Brn
(Plate)

Grn (8 Ohm)
Org (3.5 Ohm)

Blk/Red (4 Ohm)

Brn/Yel
(Screen Gr)

Brn
(Plate)
Black (0 Ohm)

Blk (0 Ohm)

PRI

PRI

SEC

EUROPE

Basingstoke, UK 01256 812812

AUSTRALIA

Queenstown, Australia 61-8-8240-2244

SEC

Schematic - 1650G Only

Green (16 Ohm)

Blu/Yel
(Screen Gr)

Grn (4 Ohm)

Brn
(Plate)

SEC

Blu
(Plate)

Yel (8 Ohm)

Brn/Yel
(Screen Gr)

Blk (0 Ohm)

PRI

Org (70 V)

Tube Audio

Blu
(Plate)

Schematic
1645A Only

SEC
CANADA

www.hammondmfg.com

Guelph, Ontario (519) 822-2960


St. Laurent, Quebec (514) 343-9010

93

Cheektowaga, NY (716) 630-7030

USA

You might also like