Scribd
Upload
2K views

SCAFFOLDING Method Statement Fv2

The document provides a method statement for erecting and dismantling a scaffold. It details: - The scaffold will be unsheeted and dimensions will be approximately 4m x 18m x 1.5m, intended for a loading of 1.2 kN/m2. - Operatives will hold the appropriate certifications and materials will meet British safety standards. - Erection and dismantling will follow specified procedures, including erecting guardrails and signs, working from protected platforms, and inspecting the scaffold. - Safety precautions like PPE use and emergency procedures are outlined, and the scaffold will be handed over and receive weekly inspections.

Uploaded by

blackwellkid
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

SCAFFOLDING Method Statement Fv2

The document provides a method statement for erecting and dismantling a scaffold. It details: - The scaffold will be unsheeted and dimensions will be approximately 4m x 18m x 1.5m, intended for a loading of 1.2 kN/m2. - Operatives will hold the appropriate certifications and materials will meet British safety standards. - Erection and dismantling will follow specified procedures, including erecting guardrails and signs, working from protected platforms, and inspecting the scaffold. - Safety precautions like PPE use and emergency procedures are outlined, and the scaffold will be handed over and receive weekly inspections.

Uploaded by

blackwellkid
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Method Statement

Example
Misc
Site
Verbal

Customer: Site: Work Area: Quote No: -

Design Ref: -

n/a

Date: 08/04/2014
Prepared by: - A S Martin
Page No
Page 1 of 4
Issue No: 1

Section 1 - Guidance For The Users Of The Scaffold


a. Users of the scaffold are directly responsible for ensuring the structure is used only for its intended purpose and
within its specified loading limits.
b. Users must ensure the scaffold is not interfered with e.g. removal of ties, guardrails or platform boards, overloaded
with materials, modified e.g. by sheeting a scaffold that is not suitable for extra wind loading this imposes on the
structure.
c. Any modifications to the scaffold must be carried out only by our competent trained scaffolders.
d. Every user of a scaffold must check the structure before use Regulation 13 The Work at Height Regulations 2005
e. Ensure that the statutory 7 day inspection is carried out and recorded.
f. Any queries or concerns relating to use of this scaffold should be raised with ASM Management.

y
l

on

Section 2 - Specification of the Works to be Carried Out


All scaffolds will be erected in accordance with: a. The Work at Height Regulations 2005.
b. NASC TG20:08.
c. Manufacturers Instructions.

e
c

n
e

Section 3 Scaffold details

a. The scaffold will be unsheeted.


b. Scaffold dimensions will be approximately 4mx18mx1.5m.
c. Intended scaffold loading is highlighted below in bold typeface: -

r
e

f
e

1.2 k/n
Section 4 - Supervision
Supervisor : -

r
o

A S Martin

Contact No :

Section 5 - Manpower & Competency

T
O

No. Of Operatives Involved: -

o
C

y
p

07818425773

a. Operatives will hold a relevant CISRS registration card.


b. Operatives will hold PASMA certification for erection of mobile towers.
c. Scaffold inspectors will hold the appropriate CISRS registration card that may be supplemented by scaffold inspection
certification. (SITS - ASI or BSI)
d. Plant operators will hold relevant certification i.e. IPAF or CPCS, subject to what is acceptable on site.

o
D

Section 6 - Equipment to be Used and Conformity Requirements.


The scaffold will be constructed of scaffold tube, scaffold fittings, scaffold boards, ladders and ancillary equipment.
a. All materials will be in accordance with a relevant British Standard or its equivalent i.e. scaffolds tube to EN 39 Type 4,
scaffold boards BS2482 (VG), scaffold fittings BS EN 74, ladders BS1129, BS2037 or BS EN 131 etc.
b. Materials will be free from visual damage that will foreseeably affect its performance whilst in use.
c. Materials are visually inspected prior to issue from the depot.
d. Materials will be visually inspected prior to use by the operative, defective materials will be segregated to prevent
use.

Ref. Feb 2013 (a)

Method Statement
Customer: Site: Work Area: Quote No: -

Example
Misc
Site
Verbal

Design Ref: -

n/a

Date: 08/04/2014
Prepared by: - A S Martin
Page No
Page 2 of 4
Issue No: 1

Section 7 - Delivery and Collection Arrangements


a. Materials will be delivered and collected using designated traffic routes, at dates and times to be agreed with the
customer.
b. Materials will be delivered and collected utilising a standard flat bed vehicle.
c. Materials will be unloaded into an area agreed with the client.
d. Material storage will be subject to good housekeeping.
Section 8 - Unloading and Loading Arrangements
Materials will be unloaded/loaded utilising the following methods :a. Manual handling.
b. Site crane.
c. Site forklift or tele-handler.

y
l

on

Section 9 Raising and Lowering Materials


All materials will be raised and lowered in a controlled manner by: a. Using goods hoist.
b. Using a gin wheel and or rope.
c. Chaining from person to person.
Section 10 Segregation of the Work Area

e
c

n
e

r
e

a. Work area to be segregated by physical barriers, warning signs will be displayed at prominent locations.

f
e

Section 11 - Personal Protective Equipment

The following PPE will be worn during our activities: a. Safety Helmet
b. Safety Boots
c. Safety Harness
d. Overalls
e. Hi-visibility Vest
f. Gloves
g. Eye Protection

r
o

Section 12 - Environmental Impact


a.
b.
c.
d.
e.

T
O

y
p

o
C

All our materials will be removed from site on completion of our works and recycled.
Scaffold boards will be FSC or PEFC certified, other timber will be certified subject to specific contract conditions.
Packaging materials will be segregated into the appropriate onsite disposal bins or be removed from site.
Noise, may be an issue if work is outside of the agreed site working hours.
Where plant or equipment is serviced or fuelled on site, COSHH assessments will be available for the substances in
use.
f. Plant refueling will be undertaken in agreed areas, spill kits will be available.
g. No other substances that are subject to the COSHH regulations will be used on site.

o
D

Section 13 - Emergency Procedures


a.
b.
c.
d.
e.

We will comply with the site emergency procedures as detailed in site induction/health and safety plan.
In the event of fall involving a safety harness, refer to the fall recovery plan accompanying this document.
The Customer will provide first aid personnel and facilities on site.
Operatives will carry a basic travelling first aid kit in their vans.
Operatives will initially report any incident/accident to their immediate Supervisor.

Ref. Feb 2013 (a)

Method Statement
Customer: Site: Work Area: Quote No: -

Example
Misc
Site
Verbal

Design Ref: -

n/a

Date: 08/04/2014
Prepared by: - A S Martin
Page No
Page 3 of 4
Issue No: 1

Section 14 Erection Procedure


Please note that dismantling will be the sequential reverse of the erection process.
a. Operatives will be briefed on the work to be carried out and will acknowledge the briefing by signature to confirm
their understanding.
b. If required access to a raised load bed will be by ladder and using the common site loading/unloading provision.
Scaffolders will assist the HGV driver when common provision is not provided, Scaffolders follow SG4:10 to install
single guard rail protection to the raised load bed, use fall arrest equipment provided.
c. Operatives must be aware of their surroundings and must work safely. They must ensure they are looking where they
are walking and working, and must not step onto or over debris. Tripping or slipping hazards must be avoided where
possible. Access routes should be chosen to be those that are free from obvious hazards. Operatives should refrain
from entering poorly lit areas until adequate lighting is provided. They should be aware of plant and lifting
movements and maintain a safe distance. Any uncontrolled hazards must be reported to Supervision immediately.
st
d. When the 1 bay of the scaffold is erected an incomplete scaffold sign or similar will be displayed on the scaffold.
As the means of access onto the lifts is erected an incomplete scaffold sign or similar will be displayed adjacent to
rd
the point of access, 3 party access will be restricted by physical barriers.
e. Whilst erecting further lifts, operatives will work from a minimum of a four board wide fully transomed working
platform that is protected by a single guardrail, when working outside of this protected platform i.e. when
establishing the protected platform or moving the protected platform, operatives will work in accordance with NASC
SG4:10.
f. Ladder access and ties are to be erected progressively with the scaffold.
g. On completion of the scaffold all spare materials will be cleared from the work area and stored in an agreed position
or removed from site.

y
l

e
c

on

n
e

r
e

f
e

Section 15 Handover Procedure

y
p

o
C

a. Following the completion of the scaffold the Scaffold Inspector will carry out a visual inspection to ensure that the
scaffold complies with the specification.
b. On satisfactory completion the Scaffold Inspector will complete a handover certificate for acceptance by the client /
hirer.

r
o

Section 16 Inspection Procedure

T
O

a. It is the client / hirers responsibility to ensure that on a weekly basis that a Scaffold Inspector will inspect the scaffold
in accordance with the requirements of The Working at Height Regulations 2005 and record the findings on the
schedule 7 inspection record and if applicable on the scaffold inspection tag.

o
D

Section 17 Dismantling Procedure

a. The location where the scaffold is to be dismantled, the method statement and risk assessment will be shown to the
operatives by supervision and the relevant hazards and preventive/control measures will be explained.
b. The operatives will sign the method statement to confirm the adequate transfer of information to enable them to
work safely.
c. The Chargehand will initially inspect the scaffold to ensure that ties and braces are still intact and that platforms are
clear of debris.
d. Once satisfied that the scaffold is safe to dismantle the work area by will be segregated by the specified means and an
incomplete scaffold sign or similar will be displayed on the scaffold adjacent to the means of access which will be
restricted by physical barriers
e. Ties and braces will not be removed from below the lift being dismantled.
f. The scaffold will then be dismantled methodically.
g. Scaffolders and Supervision will ensure that the structure remains stable and that it does not become overloaded
with dismantled materials.
h. No materials will be bombed, all fittings will be bagged or passed by hand to ground level.
Ref. Feb 2013 (a)

Method Statement
Customer: Site: Work Area: Quote No: -

Example
Misc
Site
Verbal

Design Ref: -

n/a

Date: 08/04/2014
Prepared by: - A S Martin
Page No
Page 4 of 4
Issue No: 1

i. In general scaffolds will be dismantled in the reverse order to the erection procedure.
j. On completion all materials will be cleared from the work area and stored in an agreed position or removed from site.
k. A final visual check will be made by the Charge hand prior to leaving site.
Section 18 Acknowledgement
I confirm my understanding of the contents of this document and that I will work in accordance them: Name
Date
Signed
Name
Date
J Strange

03/01/2013

G Ford

03/01/2013

J Evans

03/01/2013

J Kilford

03/01/2013

R Smyth

03/01/2013

y
l

e
c

on

n
e

r
e

f
e

r
o

T
O

o
D

Ref. Feb 2013 (a)

Signed

o
C

y
p

You might also like