TL3472

HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIER

SLOS200F OCTOBER 1997 REVISED AUGUST 2001

D
D
D
D
D
D
D
D

D OR P PACKAGE
(TOP VIEW)

Wide Gain-Bandwidth Product . . . 4 MHz

High Slew Rate . . . 13 V/s
Fast Settling Time . . . 1.1 s to 0.1%
Wide-Range Single-Supply
Operation . . . 4 V to 36 V
Wide Input Common-Mode Range Includes
Ground (VCC)
Low Total Harmonic Distortion . . . 0.02%
Large-Capacitance Drive
Capability . . . 10,000 pF
Output Short-Circuit Protection

1OUT
1IN
1IN+
VCC/GND

VCC+
2OUT
2IN
2IN+

description
Quality, low-cost, bipolar fabrication with innovative design concepts is employed for the TL3472 operational
amplifier. This device offers 4 MHz of gain-bandwidth product, 13-V/s slew rate, and fast settling time, without
the use of JFET device technology. Although the TL3472 can be operated from split supplies, it is particularly
suited for single-supply operation because the common-mode input voltage range includes ground potential
(VCC). With a Darlington transistor input stage, this device exhibits high input resistance, low input offset
voltage, and high gain. The all-npn output stage, characterized by no dead-band crossover distortion and large
output voltage swing, provides high-capacitance drive capability, excellent phase and gain margins, low
open-loop high-frequency output impedance, and symmetrical source/sink ac frequency response. This
low-cost amplifier is an alternative to the MC33072 and the MC34072 operational amplifiers.
The TL3472C is characterized for operation from 0C to 70C. The TL3472I is characterized for operation from
40C to 105C.
AVAILABLE OPTIONS
PACKAGED DEVICES
SMALL
OUTLINE
(D)

PLASTIC
DUAL-IN-LINE
(P)

0C to 70C

TL3472CD

TL3472CP

40C to 105C

TL3472ID

TL3472IP

TA

D package is available taped and reeled. Add the suffix

R to device type (e.g., TL3472CDR).

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2001, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

TL3472
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIER
SLOS200F OCTOBER 1997 REVISED AUGUST 2001

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Input voltage, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 mA
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA
Total current into VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA
Total current out of VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA
Duration of short-circuit current at (or below) 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Package thermal impedance, JA (see Notes 4 and 5): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97C/W
P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85C/W
Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65C to 150C
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC.
2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive input current can flow when the input
is less than VCC 0.3 V.
3. The output can be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
4. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150C can impact reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.

recommended operating conditions

VCC

Supply voltage

VIC

Common mode input voltage

Common-mode

TA

Operating free
free-air
air temperature

VCC = 5 V
VCC = 15 V
TL3472C
TL3472I

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

MIN

MAX

36

2.8

15

12.8

70

40

105

UNIT
V
V
C

TL3472
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIER
SLOS200F OCTOBER 1997 REVISED AUGUST 2001

electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted)

PARAMETER

TEST CONDITIONS

TA
25C

VCC = 5 V
VIO

aV

IO

Input offset voltage

Temperature coefficient of
input offset voltage

IIO

Input offset current

IIB

Input bias current

VICR

VOH

Common-mode
input voltage range

High-level output voltage

25C

VCC = 15 V
VIC = 0,
VO = 0,
RS = 50

VCC = 15 V
VCC = 15 V

Low-level output voltage

VCC+ = 5 V,
RL = 10 k

VCC = 0,

Large-signal
g
g
differential
voltage amplification

IOS

Short circuit output current

Short-circuit

CMRR

10

10

25C

6
100
15
to
12.8

Full range

15
to
12.8

25C

3.7

25C

13.6

14

Full range

13.4

RL = 2 k

0.1

0.3
14.3

25

Full range

20

VO = 0
VO = 0

25C

Common mode rejection ratio

Common-mode

VIC = VICR(min)
(min),

RS = 50

kSVR

Supply-voltage rejection ratio

(VCC/VIO)

VCC = 13.5 V to 16.5 V,

ICC

Supply current (per channel)

100

V/mV

10

34

20

27

25C

65

97

dB

25C

70

97

dB

mA

25C
Full range

3.5

4.5

4.5

5.5

25C

3.5

4.5

VCC+ = 5 V, VO = 2.5 V, VCC = 0, No load

13.5

25C

Sink: VID = 1 V,

nA

14.7

Source: VID = 1 V,

nA

25C

RL = 2 k

No load

500

25C
Full range

RS = 100

75

700

25C

RL = 2 k

mV

V/C

300

Full range

VO = 10 V,
V

VO = 0
0,

10

1.0

Full range

25C

RL = 2 k
AVD

1.5

UNIT

12

RS = 50

VCC = 0,

MAX

Full range

VCC = 15 V

VCC+ = 5 V,
RL = 10 k

TYP

Full range

RL = 2 k
VOL

MIN

mA

All typical values are at TA = 25C.

Full range is 0C to 70C for the TL3472C device and 40C to 105C for the TL3472I device.

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

TL3472
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIER
SLOS200F OCTOBER 1997 REVISED AUGUST 2001

operating characteristics, VCC = 15 V, TA = 25C

PARAMETER

TEST CONDITIONS

MIN

TYP

SR+

Positive slew rate

10

V/s

SR

Negative slew rate

AV = 1
AV = 1

13

V/s

To 0.1%

1.1

To 0.01%

2.2

ts

Settling time

AVD = 1,
1 10-V
10 V step

Vn
In

Equivalent input noise voltage

f = 1 kHz,

Equivalent input noise current

f = 1 kHz

THD

Total harmonic distortion

VO(PP) = 2 V to 20 V, RL = 2 k, AVD = 10, f = 10 kHz

GBW

Gain-bandwidth product

f =100 kHz

BW

Power bandwidth

VO(PP) = 20 V,
V RL = 2 k
k, AVD = 1
1, THD = 5
5.0%
0%

Phase margin

RL = 2 k

Gain margin

RL = 2 k

ri

Differential input resistance

Ci

Input capacitance

VIC = 0
VIC = 0

Channel separation

f = 10 kHz

Open-loop output impedance

f = 1 MHz,

zo

VI = 10 V to 10 V,,
RL = 2 k, CL = 300 pF

POST OFFICE BOX 655303

RS = 100

nV/Hz
pA/Hz

MHz

160

kHz

70
50

CL = 0

12

DALLAS, TEXAS 75265

CL = 300 pF

AV = 1

49

CL = 0

CL = 300 pF

UNIT

0.22
0.02
3

MAX

deg
dB

150

2.5

pF

101

dB

20

IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its products to the specifications applicable at the time of sale in accordance with
TIs standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary
to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except
those mandated by government requirements.
Customers are responsible for their applications using TI components.
In order to minimize risks associated with the customers applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
products or services might be or are used. TIs publication of information regarding any third partys products
or services does not constitute TIs approval, license, warranty or endorsement thereof.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations and notices. Representation
or reproduction of this information with alteration voids all warranties provided for an associated TI product or
service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Resale of TIs products or services with statements different from or beyond the parameters stated by TI for
that product or service voids all express and any implied warranties for the associated TI product or service,
is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Also see: Standard Terms and Conditions of Sale for Semiconductor Products. www.ti.com/sc/docs/stdterms.htm

Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265

Copyright 2001, Texas Instruments Incorporated

This datasheet has been download from:

www.datasheetcatalog.com
Datasheets for electronics components.