Electronic Over Current Relays

Electronic Over current Relays

Electronic Under current Relays
Electronic Voltage Relays
Other Protection & Monitoring Devices
Current Transformers

General Information

Company History
1981
1988
1990
1990
1993
1994
1995
1996
1997
1997
1997
1999

2001
2002

SAMWHA Engineering Co., Ltd incorporated

SAMWHA R&D Center established
The 2nd factory completed in Iksan, Korea
Recognized as the Advanced Technology Small& Medium
Sized Company by the Korean Ministry of Trade and Industry
SAMWHA Electric(Tianjin)Co., Ltd.
established in Tianjin, China
SAMWHA Electronics (Beijing)Co., Ltd.
established in Beijing, China
SAMWHA R&D Center building completed in Eumsung, Korea
SAMWHA Engineering (Vietnam) Co., Ltd.
established in HCMC, Vietnam
Reach to 5millions of EOCR production
ASIC(Application Specific Intergrated Circuit) Chip Developed
Registered to KOSDAQ(Registered No. 507)
Approved to New Technology by Korean Government for
ASIC Chip Applicable EOCR-3D&FD Series
Product(Registered No. 5)
Recognized Export Leading Company by Korean Government
SAMWHA EOCR Ltd. Established

TQCS Quality System

Total
Quality
Customers
Satisfaction

Domestic Awards
1985
1986

1989
1990
1991
1994
1995
1998
1999

The Presidential Prize of 85 National Invention Awards

The Ministerial Prize of National Invention Promotion Awards
The KYUNGHYANG Energy Prize
The Ministerial Prize of Korea Electronics Exhibition
The Golden Prize of 86 National Invention Awards
The Order of Industrial Service Merit
The Grand Prix of 89 National Invention Awards
The Bronze Prize of 91 National Invention Awards
The Venture Company of 1991
The Electric Industry Development Prize of KOMA
The Order of Industry Service Merit
The Tower of Export
UN WIPO Prize
The Order of Industrial Service Merit

International Awards
1989
1990
1992
1993
1998

The Silver Medal of INPEX Pittsburgh

The Silver Medal of Geneva International Invention Award
The Golden Medal of De L Invention De Paris
The Bronze Medal of Beijing International Award
The Golden Medal of IENA98. Germany

Approved by BM TRADA(U.K)
Approved Date 1995. 8. 30

ISO 9001 Certificate

Reliability & Safety

EOCR EOCR EOCR EOCR EOCR EOCR EOCR
EVR
SS SP DS 3D FD PMZ PFZ

Approved
UL
CE
ABS
SEV
KR
CCS
TV
CSA

Worldwide Service Network

ISO 9001 Certificate

RINA

Underwriters
Laboratories
Inc
Community
European
American
Bureau of
Shipping
Association
Suisse Des
Electriciens
Korean
Register of
Shipping
China
Classification
Society
TV
Germany
Canadian
Standards
Association
Registro
Italiano
Navale

Intellectual Property
Item
Patent
Utility Model
Design
Trade Mark
Total

Domestic
Register Applied for

29
20
25
34
108

6
7
0
11
24

Overseas
No

35
27
25
45
132

Register Applied for

5
0
0
14
19

0
0
0
3
3

No

5
0
0
17
22

Total
40
27
25
62
154

Over Current Relay

Option-1. Looping (Protect smaller current by looping option)
Some motor size may require one-third or one-fourth of particular EOCR current range. These
installations can be accommodated by looping the motor wire 2 or 3 times through the integral current
transformers of the EOCR. This reduces the number and type of relays inventoried for spare purposes.
Each additional loop will increase the current measured as indicated by the following chart.
Current Setting
Range(A)
05 Type

0.5 ~ 6
0.25 ~ 30
0.17 ~ 20
0.12 ~ 1.50
0.10 ~ 1.20

Looping Option

Time of Passing
(#)
1
2
3
4
5

Option-2. External Current Transformer Option (Ext. CT option protect bigger current)
Ordering option - 05 type of each model fitted to an external current transformer can
achieve higher ampere ranges.

No. of Loops
(#)
0 Fig 1
1 Fig 2
2
3
4

Straight-through-Wiring

looping Option ( 2-Loop )

Fig 1

Fig 2

05 Type
60 Type
Ext. CT Option

Current Setting
Range(A)

Current Ratio
of Ext. CT

0.5 ~ 600
5.0 ~ 600
10 ~ 120
15 ~ 180
20 ~ 240
30 ~ 360

NIL
NIL
100 : 5
150 : 5
200 : 5
300 : 5

External 3CT Option

External SR-CT Option

EOCR Type Table for 3phase Motor

Current Setting Range
(Adjustable)
(A)
0.5 ~ 6
5.0 ~ 60
10 ~ 120
20 ~ 240
30 ~ 360
40 ~ 480
50 ~ 600
60 ~ 720

AC220(V)
kW
HP
0.75
1
5.5
7.5
22
30
37
50
55
75
95
125
110
150
150
200

Capacity of 3 Phase Motor (kW/HP)

AC380/440(V)
Current
(A)
kW
HP
1.5
2
4.8
22
30
26
37
50
93
75
100
160
132
175
230
190
250
360
220
300
440
300
400
570

Current
(A)
4.2 / 3.6
49 / 46
84 / 73
163 / 141
263 / 227
376 / 325
423 / 390
602 / 520

EOCR Setting Patlem / Motor Running Current (3DD & FD Series)

TYPE
05
60
100:05
200:05
300:05
400:05
500:05
600:05

Cable Size
Allowable
Thickness
( )
Current(A)
3.5
28
5.5~14
67
38
130
100
240
250
430
325
495
400
565
500
625

Remark

Built-in CT(Standard type)

Assemble
with
External CT

Over Current Relay

Overview
D-TIME(Delay Time):
When starting the motor, it s current is increasing 5 to 8 times of rated current and its starting time
is different according to the load of motors. D-Time knob(Mode) has a function to delay
the trip during starting period even if starting current exceeds over preset over-current value.

O-TIME (Operating Delay Time):

When EOCR senses over-current which exceeds over preset over-current range.
O-Time knob(Mode) delays trip until EOCR trips after detecting over-current during running period.
In case of Definite type, Over-current protection is provided by the relay tripping when motor
operating current(In) exceeds EOCR current setting(Is) for a period greater than preset trip time(O-Time),
while Inverse type shows that Over-current protection is provided by the relay tripping according to
the Time-Current Characteristic Curve.

RESET
Depressing the RESET button or interrupting power supply resets the relay immediately.
Depress the RESET button on the facia for manual reset. Electrical Reset can be achieved by
interrupting power supply in remote area. Auto Reset can be achieved automatically
according to R-Time setting. Auto reset function is selectable by using mode switch.
EOCR with fixed auto reset time or adjustable auto reset time is applicable.

TEST
It has function to check and confirm the status of the motor by depressing the TEST button on the facia.
To keep depressing the TEST button makes relay trip after the elapse of D-Time and/or O-Time.
Once TEST is done, then reset the relay by depressing RESET button.
The test function of Digital EOCR with 7 Segment Display cannot be performed during motor running,
but possible when motor is stopped.

N Type ( Fail-safe Mode / No Volt Release )

R type ( Non-Fail-Safe Mode )

NVR(No Volt Release)/On(N Type)

Fail-safe

NVR(No Volt Release)/Off (R Type)

Non-Fail-safe

The output of relay is normally energized with control power applied.

It is called NVR (No Volt Release) function and recommended to use
output mode for safe protection.
It is selectable by DIP switch or FS Mode

In all case, the failure of the control voltage may not interrupt the process.
It is selectable by DIP switch or FS Mode

Caution)

Caution) NVR function is designed to offer more accurate protection for motor. The motor
can not start in case there is no power supply to EOCR or the span of life of
motor is gone through. It is able to find the problem in its process in advance.

In case of Non-Fail-Safe mode, periodical checking is required in

case there is abnormal power supply to EOCR or the span of life of
motor is gone through.

Digital EOCR
Classfication

EOCR-3DE Series

EOCR-3M Series

Model

Model
Wiring
Mount

Protection

3DE

3EZ

3DM

3MS

3MZ

3M42

05: 05~10A, 60: 5~70A

05: 05~10A, 20: 5~20A

Wire-through
Terminal
Flush Mounting
Panel Mounting
Basic Type
Overcurrent
Use external CT

0.5~60A

Undercurrent
Locked Running
Rotor Starting

05: 05~10A, 60: 5~70A

1~960A(10:5~800:5)

1~960A(10:5~800:5)

0.5~less than preset O.C / OFF

0.5~less than preset O.C / OFF

0.5, 1~10sec

1~10sec

Within 0.5sec after D-Time

Within 0.5sec after D-Time

Phase Loss

Within 3sec

Within 3sec

Phase Reversal
Phase Unbalance
Ground Fault
Short Circuit

0.1~0.3sec

0.1sec

Within 8sec

Within 8sec

Alert Output
Trip Cause Memory
Trip Cause Display

Contacts
Rating

A:0.02~3A, B:0.2~10A

A:0.03~2.5A, B:0.2~10A

0.05sec

A/F/H/U

A/F/H

4~20m
-

Last 3 Trip Cause

Mode

5-Digit 7segment

Button SW.

Rotary SW & Button SW.

Zero Phase Current

Zero Phase Current

O.L:2-SPST(1a1b)

O.L:1-SPST(1a)

O.L:2-SPST(1a1b)

O.L:2-SPST(1a1b)

O.L:1-SPST(1a)

AL:1-SPST(1a)

GR:1-SPST(1a)

AL:1-SPST(1a)

S.C:1-SPST(1a)

GR:1-SPST(1a)

Rating

Control Voltage (50/60Hz)

Last 1 Trip Cause

4-Digit 7segment

Display
Running Time Memory & Setting
Bar-Graph
Current Signal Output
Setting SW. Type
Ground Fault Current Sensing

15%, 110VAC

15%

24VAC/DC, 85~250VAC/DC

Panel Mounting / Flush Mounting makes it easier for use.

- Digital Ammeter is installed at the front cover of panel door in Flush Mounting type. It makes possible to check sensing current and
finding the cause of trip with tripped current easily, to set current and O-time by simple button selection without removing unit from panel.
- Panel Mounting type with Digital Ammeter is installed inside the MCC panel and Just Operator is Possible to adjust it.

Following conditions should be considered in case of installing EOCR.

- Overcurrent & Phase Loss must be included as basic protective function in the point of view for its law and regulation.
- Earth leakage current protection must be added against moisture and humidity conditions.
- In case you need to sense the overload increasing, Alert function must be added.
- If you need to confirm the current of many motors in one place , Current signal output transducer function (4~20mA) must be added.
- Short Circuit protection must be added if you protect line damage caused by Short Circuit.
- EOCR with 3CT is recommended to not only 3 3w, but also 3 4w condition.

Window / Terminal makes it easier for installation.

- Wire is passing through CT without cutting, that is much easier for installation. It has also more convenient application to external CTs.
- As for Terminal type, display part is Flush Mounting type but Converter is Panel Mounting type with its application less than 60Amp.

The same diameter of Digital Ammeter to conventional Analogue Ammeter makes it easier for installation.
- Ammeter Selector S/W is not necessary as 3 phase current is displayed L1, L2, L3 in order every 5 seconds.
- It is easy to install Ammeter by using cap cover and it saves install time.

Alert Output Mode

- F ( Flicker ) : Flicker
- U ( Under Current Mode ) : AL oupput is transferred to UC (3DD/FD vesion E )

O.L:2-SPST

3A/250VAC, Resistive

3A/250VAC, Resistive
24VAC/DC, 220VAC

- A ( Ampere Relay ) : Energized when sensing current

- H (Holding ) : ON-OFF output mode

05: 05~10A, 6

EO

MC
Re
Ov
Un
Tim
- 0.5
UC
OFF
Dig
/ Tri
Tri
Ma
Th
Fit
Re

Solid State Overlo

EOCR-FDE Series

EOCR-P Seri

Terminal

Terminal

20

FDE

FEZ

FDM

FMS

FMZ

FM420

(Display)

(Display)

(Display)

(Display)

(Display)

(Display)

(Converter)

(Converter)

(Converter)

(Converter)

(Converter)

(Converter)

05: 05~10A, 60: 5~70A

05: 05~10A, 20: 5~20A

05: 05~10A, 60: 5~70A

0.5~60A

60: 5~70A

PMZ

05~60A

05: 05~10A, 60: 5~70A

1~3600A(10:5~300

1~960A(10:5~800:5)

1~960A(10:5~800:5)

0.5~less than preset O.C / OFF

0.5~less than preset O.C / OFF

0.5~less than preset O.

0.5, 1~10sec

1~10sec

OFF/0.1~10sec/Adju

Within 0.5sec after D-Time

Within 0.5sec after D-Time

Within 0.5sec after D

Within 3sec

Within 3sec

0.1~0.3sec

0.1sec

0.1~0.3sec

Within 8sec

Within 8sec

Within 8sec

Within 3sec

A:0.02~3A, B:0.2~10A

A:0.03~2.5A, B:0.5~10A

0.05sec

A/F/H/U

A/F/H

Last 3 Trip Cause

Definite: 0.03~10A, Invers

0.03~0.05sec
-

Last 1 Trip Cause

Last 3 Trip Caus

5-Digit

5-Digit

4-Digit 7segment
-

mA

T(1a1b)

EOCR-FM Series

4~20mA

4~20mA
Button SW.

Rotary SW. & Button SW.

Button SW.
-

Zero Phase Current

Zero Phase Current

Zero Phase Curre

O.L:2-SPST(1a1b)

O.L:1-SPST(1a1b)

O.L:2-SPST(1a1b)

O.L:2-SPST(1a)

O.L:1-SPST(1a)

O.L:2-SPST(1a1b)

OL/SH : 2-SPST(1a

AL:1-SPST(1a)

GR:1-SPST(1a)

AL:1-SPST(1a)

SC:1-SPST(1a)

GR:1-SPST(1a)

3A/250VAC, Resistive

3A/250VAC, Resistive
24VAC/DC, 220VAC

15%, 110VAC

24VAC/DC, 85~250VAC/DC

15%

OCR-3DE/FDE

CU Based
eal Time Processing / Higher Precision
vercurrent Protection Range: 0.5~60A, Wide Range Protection (Use with external CT from 11 to 960A, Direct application without CT up to 60A)
ndercurrent Protection Range: 0.5~59A / OFF (Use with external CT less than 960A)
me Characteristic for Overcurrent
5~10A : Definite / Inverse Selectable, Over 11A : Definite(Use with external CT in case using Inverse time)
UC output is used as common to OC output. When choosing U in ALo mode, AL mode becomes
F(--) and AL output ( 07-08 ) is transferred into Undercurrent (UC) output mode automatically.
gital display / 3 Phase Current Display: Digital Ammeter (Every 5 seconds)
ipped Cause Digital Display: Easy Troubleshooting
ip Cause Memory: Last 3 trip check function. Possible to check with tripped trip cause and current
anual / Electrical Reset
he tripping relay is normally energized with control power supply. (Selectable)
t to a variety of environment as Terminal & Window type.
esistive Strengthened against variable freguency device such as inverter : 20~400Hz.

GR : 1-SPST(1a

3A/250VAC, Resis

24VAC/DC, 85~250VA

erload Relay

EOCR-SSD

Digtal Over-Current Relay

Series

PFZ

(Display)
(Converter)

Protection
Protective Item
Over-current
Phase Loss
Locked Rotor

Trip Time
O-Time
3sec
0.5sec after elapse dt

Description
Is In
[(MAX - MIN) / MAX] 100 90
3times OC setting value

A
5~3000:5)
set O.C / OFF
/Adjustable

Specification
Over-current Setting

Current

fter D-Time
sec

Starting delay time

Trip time

sec
sec
nverse: 0.03~1A
5sec
-

Reset
Operating t-c characteristic
Tolerance

Over-current
Current
Time
Operation
Store

Cause

Environment

05
30
60
D-Time
O-Time

Temperature

Humidity
Control Power
mA
SW.
Current
ST(1a1b)
ST(1a)
Resistive

Contact Rating
Insulation
Dielectric Strenghth

250VAC/DC

2-SPST
Between casing and circuit
Between casing and circuit
Between open contacts
between circuit

Installation

0.5 ~ 6A
3 ~ 30A
10 ~ 60A
1 ~ 30sec
0.5, 1 ~ 10sec
Manual / Electrical
Definite
I<1A : 0.05A, I 1A : 5%
t 3S : 0.2s, t>3s : 5%
-20 ~60
-30 ~80
30~85% RH non-condensing
110 : 110VAC 15%, 50/60Hz
220 : 220VAC 15%, 50/60Hz
440 : 440VAC 15%, 50/60Hz
24 : 240VAC DC
3A / 250VAC , Resistive
Over 10 , DC500V
2000VAC 60Hz, 1min
1000VAC 60Hz, 1min
2000VAC 60Hz, 1min
35mm Din Rail or Panel Mounting

MCU(Micro Controller Unit) based / 2-CT Type

Real Time Processing / Higher Preceision
Current Setting Renge - 05Type : 0.5 ~ 6A / 30Type : 3 ~ 30A / 60Type : 10 ~ 60A
Digital display : trip cause / easy troubleshooting
Reset : Manual (instantaneous) / Electrical (remote)
Load selection by DIP switch : Single phase(1P) / Three phase(3P)
Fail safe(N) / Non-fail safe(R)

Electronic Overload Relays

Features
Compact Design
Multiple Protection Functions
Wide Current Adjustment Range (10:1)
Ammeter Function
Trip Indication LED
High Accuracy
Manual Instantaneous Reset
Electrical Remote Reset
Test Function
Ambient Insensitive
Low Energy Consumption
Fail-safe Operation (No Volt Release)

Wide Adjustment Range

EOCR has a wide current adjustment range of over 10:1.
It enables three type models to cover a wide range from
0.1A up to 600A thus reducing the number and type of
relays that must be inventoried for spare purposes.

EOCR-SS

Looping Option
Some motor size may require only one-third or one-fourth
of particular EOCR current range. These installations can
be accommodated by looping the motor wire 2 or 3 times
through the integral current transformers of the EOCR.
This reduces the number and type of relays inventoried for
spare purposes. Each additional loop will increase the
current measured as indicated by the following chart.
No. of Loops Time of Passing Current Set. Range(A)
1
0.50 - 6.0A
0
2
0.25 - 3.0A
1
3
0.17 - 2.0A
Looping
2
4
0.12 - 1.5A
Option
3
5
0.10 - 1.2A
4

05 Type

Over-current Protection
Over-current protection is provided by tripping
the relay when motor operating current (In)
exceeds over-current setting (Is) of EOCR for a
period greater than the preset operating time
(O-Time).

2 Integral Current Transformers

Electronic Shear-pin Function
Independently Adjustable Starting Trip
Delay (D-Time) & Operating Time
(O-TIME)

Protection
Straight-through-Wiring

Phase Loss Protection

During a phase loss, the motor winding current
may increase by 150% or more.
As the motor winding current increases, the
winding temperature may also increase and
possibly damage the winding insulation.
The quick trip time on EOCR helps to prevent
over-current damage to the windings.

Looping Option(1-Loop)

External Current Transformer Option

Ordering option - 05 type of each model fitted to
an external current transformer can achieve
higher ampere ranges. (Ext. CT Option)
Type
05
100
200
Ext. CT 300
Option 400
500
600

Current Ratio of Ext. CT

100:5
200:5
300:5
400:5
500:5
600:5

Current Setting Range

0.5 - 6A
10 - 120A
20 - 240A
30 - 360A
40 - 480A
50 - 600A
60 - 720A

External CT Option

Ammeter Function & Trip Indication

Indication LED on the dial plate provides trip
indication and ammeter functions.
The LED starts to flash at the point where
motor current is equal to current setting level
(Is), so user can verify motor current by reading
the LOAD adjustment scale on the dial plate.
This also provides an accurate current setting.
The LED is illuminated when motor current
exceeds current setting (Overload Status).
After tripping has occurred, the LED stays on
until the relay is reset.
The trip indication is also an important feature
of a multiple relay & contactor (starter)
installation.

Manual Instantaneous Reset

Pushing RESET button on the dial plate or
interrupting power supply provides a manual
instantaneous reset.
Electrical remote reset is also provided by the
panel-mounted RESET button.
Low Energy Consumption
EOCR-SS uses only 250mA of power, much
less than thermal bimetallic overload relays.
The result is significant cost savings over the
life of relays (over 20 times cost saving).

Protective Item
Over-current
Phase Loss
Locked Rotor

Operating (Trip) Time

O-TIME
O-TIME
O-TIME + D-TIME

Specification
Current Setting

Type
05
30
60
100~ (over 60A)
Time
Start D-TIME
Setting
Trip
O-TIME
Control Voltage 24
(50/60Hz)
220
440
Contact Rating Mode
Rating
Status
Time-Current Characteristic
Operating (Trip) Indication
Mount

Typical Wiring

Range
0.5 - 6A
3 - 30A
5 - 60A
Ext. CT Option
0.2 - 30 sec
0.2 - 10 sec
24VAC/DC
90 - 260VAC
320 - 480VAC
1-SPDT(1C)
3A/250VAC Resistive
Normally Energized
Definite
2-LED
35mm Din-rail / Panel

Solid State Over-Current Relay

EOCR-AR

EOCR-DS

2 Integral Current Transformers

Automatic Reset and Adjustable
Reset Timer

Protection
Protective Item
Over-current
Phase Loss
Locked Rotor

Type
05
30
60
100~ (over 60A)
Time
Start D-TIME
Setting
Trip
O-TIME
Control Voltage 24
(50/60Hz)
220
440
Contact Rating Mode
Rating
Status
Time-Current Characteristic
Operating (Trip) Indication
Mount

Typical Wiring

3 Integral Current Transformers

Electronic Shear-pin Function
Independently Adjustable Starting Trip
Delay (D-Time) & Trip Time (O-TIME)
EOCR-DS + Power Terminal Kit
EOCR-DST
Protection

Operating (Trip) Time

O-TIME
O-TIME
O-TIME

Specification
Current Setting

EOCR-SP

Protective Item
Over-current
Phase Loss
Locked Rotor

Protection
Operating (Trip) Time
O-TIME
O-TIME
O-TIME + D-TIME

Specification
Range
0.5 - 6A
3 - 30A
5 - 60A
Ext. CT Option
0.2 - 30 sec
0.2 - 120 sec
24VAC/DC
90 - 260VAC
320 - 480VAC
1-SPDT(1C)
3A/250VAC Resistive
Normally Energized
Definite
LED
35mm Din-rail / Panel

Current Setting

Type
05
30
60
100~ (over 60A)
Time
Start D-TIME
Setting
Trip
O-TIME
Control Voltage 24
(50/60Hz)
220
440
Contact Rating Mode
Rating
Status
Time-Current Characteristic
Operating (Trip) Indication
Mount

Typical Wiring

2 Integral Current Transformers

Fit Directly into IEC or NEMA Contactor

Protective Item
Over-current
Phase Loss
Locked Rotor

Operating (Trip) Time

O-TIME
O-TIME
O-TIME + D-TIME

Specification
Range
0.5 - 6A
3 - 30A
5 - 60A
Ext. CT Option
0.2 - 30 sec
0.2 - 10 sec
24VAC/DC
90 - 260VAC
320 - 480VAC
2-SPST
3A/250VAC Resistive
Normally Energized
Definite
2-LED
35mm Din-rail / Panel

Current Setting

Type
01
10
20
Trip Time Setting O-TIME
Control Voltage 24
(50/60Hz)
220
440
Contact Rating Mode
Rating
Status
Time-Current Characteristic
Operating (Trip) Indication
Mount

Range
0.3 - 2A
1 - 12A
5 - 25A
0.5 - 15 sec
24VAC/DC
90 - 260VAC
320 - 480VAC
1-SPDT(1C)
3A/250VAC Resistive
Normally Energized
Definite
2-LED
Contactor Mounted

Typical Wiring

EOCR-SS / SP / DS Series
Features
Compact Design
MCU Based
Multiple Protection Functions
Wide Current Adjustment Range (10:1)
Ammeter Function & Trip Indication
Easy Troubleshooting & Run Monitor
Manual Instantaneous / Electrical Remote Reset
Test Function
Ambient Insensitive
Fail-safe Operation

EOCR-SS1 / SS2

Run Monitor & Troubleshooting with 2-LEDs

2 LED Lamps on the dial plate provide easy troubleshooting and run-monitor functions

2 Integral Current Transformers

Independently Adjustable Starting Trip Delay & Trip Time

Protection
Protective Item
Over-current
Phase Loss
Locked Rotor
Time Characteristic

EOCR Operating (Trip) Time

SS1
O-TIME(curve)
4 sec
D-TIME
Inverse

SS2
O-TIME
4 sec
D-TIME
Definite

Specification
Time-Current Characteristic Curve

EOCR
Current Setting

Definite Time Characteristic of

EOCR-SP2/SS2/DS2(T)/DS3(T)

05
30
60
100~ (over 60A)
Time
Start D-TIME
Setting
Trip
O-TIME
Control Voltage
24
(50/60Hz)
110
220
Contact Rating
X1 Mode & Rating
Status
X2 Mode & Rating
Status
Time-Current Characteristic
Trip & Trip Cause Indication
Mount

Typical Wiring

Inverse Time Characteristic of EOCR-SP1

Inverse Time Characteristic of EOCR-SS1/DS1(T)

SS1
SS2
0.5 - 6A
0.5 - 6A
3 - 30A
3 - 30A
5 - 60A
External CT Option
0 - 50 sec
1 - 50 sec
1 - 10
0.2 - 10 sec
24VAC/DC
85 - 150VAC
180 - 260VAC
1-SPST, 3A/250VAC Resistive
Normally Energized
1-SPDT, 3A/250VAC Resistive
Normally De-energized
Inverse
Definite
2-LED
35mm Din-rail

MCU Based Over-Current Relay

EOCR-DS1 / DS2 / DS3

EOCR-SP1 / SP2

3 Integral Current Transformers

Independently Adjustable Starting Trip Delay & Trip Time
EOCR-DS1/2/3 + Power Terminal Kit = EOCR-DS1T/2T/3T

Protection
Protective Item
Over-current
Phase Loss
Locked Rotor
Phase Reversal
Time Characteristic

Protection
EOCR Operating (Trip) Time
DS2(T)
DS1(T)
DS3(T)
O-TIME
O-TIME(curve)
O-TIME
4 sec
4 sec
4 sec
D-TIME
D-TIME
D-TIME
0.1sec
Definite
Inverse
Definite

Specification
EOCR
Current Setting

05
30
60
100~ (over 60A)
Time
Start D-TIME
Setting
Trip
O-TIME
Control Voltage
24
(50/60Hz)
110
220
Contact Rating
Mode
Rating
Status
Time-Current Characteristic
Trip & Trip Cause Indication
Mount

Typical Wiring

2 Integral Current Transformers

Fits Directly into IEC or NEMA Contactor

Protective Item
Over-current
Phase Loss
Locked Rotor
Time Characteristic

EOCR Operating (Trip) Time

SP1
SP2
O-TIME(curve)
5 sec
4 sec
4 sec
O-TIME+10 sec
D-TIME
Inverse
Definite

Specification
DS1(T)
0.5 - 6A
3 - 30A
-

DS2(T)

DS3(T)
0.5 - 6A
3 - 30A
5 - 60A
External CT Option
0 - 50 sec
1 - 50 sec
1 - 10
0.2 - 10 sec
24VAC/DC
85 - 150VAC
180 - 260VAC
2-SPST
3A/250VAC Resistive
Normally Energized
Inverse
Definite
Definite
2-LED
35mm Din-rail

EOCR
Current Setting

01
10
20
Time
Start D-TIME
Setting
Trip
O-TIME
Control Voltage
24
(50/60Hz)
110
220
Contact Rating
Mode
Rating
Status
Time-Current Characteristic
Trip & Trip Cause Indication
Mount

SP1
0.3 - 1.2A
1 - 12A
5 - 25A
10 sec(Fixed)
1 - 10

SP2
03 - 1.2A
1 - 12A
5 - 25A
1 - 50 sec
5 sec(Fixed)

24VAC/DC
85 - 150VAC
180 - 260VAC
2-SPST
3A/250VAC Resistive
Normally Energized
Inverse
Definite
2-LED
Contactor Mounted

Typical Wiring

EOCR-3DE/FDE Series
Features
Compact Design
3DE/3EZ : Panel Mounting Type
FDE/FEZ : Panel Flush Mounting Type
MCU(Microprocessor Control Unit) Based
3 Integral Current Transformers
Multiple Protection Functions
Digital Ammeter
Troubleshooting / Trip Cause Memory, Display
Adjustable Operating Features by Mode switch
Wide Current Adjustment Range
Selectable Time-Current Characteristics (Inverse / Definite)
Manual (Instantaneous) / Electrical (Remote) Reset
Test Function
Ambient Insensitive
Selectable Fail-safe and Non-fail-safe Operation Modes
Comparison Table of Model
3DE / FDE

EOCR
Protection

Over - current
Under - current
Phase Loss
Phase Unbalance
Phase Reverse
Locked Rotor
Ground Fault
Run Monitor & Load Alert Function
Selectable Alerting Pulse

3EZ / FEZ

Smaller ampere ranges than particular EOCR current range can be

covered by looping the motor wire 2 or 3 times as under described.
No of Loops Current Ratio Current Setting
of Ext. CT
Range (A)
0.5 Type

1
2
3
4
5

0
1
2
3
4

Looping
Option

0.5 - 6
0.25 - 3
0.17 - 2
0.12 - 1.5
0.1 - 1.2

Looping Option (1-Loop)

External CT Option
Higher ampere ranges can be achieved by setting in CT mode fitted
to an external current transformer, and the actual motor current display
is possible in any case
Type

Value in
CT mode

Current Setting
Range (A)

wide Range
10 : 5
15 : 5

OFF(--)
10
15

0.5 ~ 60A
1 ~ 12A
1.5 ~ 18A

800 : 5

800

80 ~ 960A

EOCR-3DE+External CT

Alert Function
-

Protection Feature
Function

Looping Option

Description
This is provided by the relay tripping when motor
operating current(In) exceeds current setting value in
oc mode for a period greater than the preset trip
time(O-Time in ot mode)(Curve-2)
Over-current tc
This is provided by the relay tripping when motor
In
(Inverse operating current(In) exceeds current setting value in
oc mode according to the Time-current Characteristic
T-C)
Curve(Curve-1)
This is provided by the relay tripping when motor
Definite operating current(In) is lower than current setting value
Under-current Uc
in uc mode for a perid greater than the preset trip
T-C
time(Time in ut mode)
mode

dE
(Definite
T-C)

When motor operating current (In) exceeds the alert setting (As), the
alert relay outputs three kind of signal. The output can be used to warn
customers/operators of possible overloading and avoid unnecessary
motor shutdown.
The type of output signal is decided by the selection in the Alo mode
A(Ampere relay): energized whenever CT senses a current
F(Flickering): characterA and current value flashs frequently
H(Holding): ON-OFF
U(Undercurrent mode): the AL output(07
08) is transferred into
Uc output
Running state

More then
preset(%) of Alert

Normal

SettingALo

Trip

FlickerF
HoleH

2 sec

AuxA
The relay will be operated within 3 sec.
When the phase failure occurs

Phase Loss

PL

Phase
Unbalance

This is provided by the relay tripping in phase unbalance

Ub 5~50% greater than setting % difference in terms of maximum
phase current : [(MAX-MIN)/MAX] 100[%]
On
In the event of phase reversal, the relay trips in 0.1sec
RP
Off(--) Phase reversal protection function is disabled : this
allows the relay to be used for reversing application
Ec 0.03~3A Ground fault protection is provided by the relay tripping
accoding to zero sequence current sensed by ZCT
This is a protection for locked rotor in starting state.
2~10 The variable setting range is 2~10 times oc setting
Lc Times value, but maximum setting value is limited in case
oc setting value is greater than 10A. The maximum
OC
setting value is calculated by [100/oc setting value]
This is a protection for locked rotor while motor is
1.5~5 working. The variable setting range is 1.5~5 times
oc setting value, but the maximum setting value is
Sc Times
limited in case oc setting value is greater than 20A,
OC
The maximun setting value is calculated by
[100/oc seting value]

On

In = Motor Operating Current / Is = EOCR Over-current Setting / As = Alert Setting

Fail-safe & Non-fail-safe

Phase
Reversal
Ground
Fault
Locked
Rotor

Stall

T-C : Time-Current Characteristic

10

The tripping relay can be operatcd in a fail-safe or non-fail-safe mode

Application of the Fail-safe (Electrically Held) Connection

Faie safe setting inFS mode : ON
The tripping relay is normally energized with control power supply

Application of the Non-fail-safe Connection

Fail safe setting in FS mode: OFF(--)
In all cases, the failure of the control voltage may not interrupt the process.
Control power on

95

96

97

98

95

96

(Non-Fail safe) 97

98

FS:ON
(Fail safe)
FS-(OFF)

Ralay Trip

Digital Over Current Relay

LED Display

Examples of Trip Cause Indication

Over-current Trip
Relay displays a trip, caused by over-current.
which has been detected from phase L1(R/T1).
Under-current Trip
Relay displays a trip, caused by under-current.
which has been detected from phase L2(S/T2).

Digital Ammeter
3 phase motor currents (In) / Ground fault current are displayed in
sequence on the LED display.
3DE/FDE

Phase Loss Trip

Relay displays a trip, caused by phase loss
(Phase Failure) on Phase L2(S/T2)
Phase Reversal Trip
Relay displays a trip, caused by phase reversal.
Phase Unbalance Trip
Relay displays a trip, caused by phase
unbalance. in phase L1(R/T1).
Ground fault Trip : EOCR-3DZ/FDZ Only
Relay displays a trip, caused by ground
fault current
Locked Rotor Trip
Relay displays a trip, caused by locked rotor.
during starting state

3EZ/FEZ

Locked Rotor Trip

Relay displays a trip, caused by locked rotor.
while motor is working

Time-Current Characteristic Curve

Rotation display of Phase current

Instead of automatic rotation, manual display rotation is possible as
depressing once SET/Store button during an operation. If manual is
selected, the information of phase current L1 is displayed firstly and
next information is displayed continuously like a manner of L1 L2
L3 (GR) L1 whenever depress SET/Strore button evey once
Digital Trip Cause Indication / Easy Troubleshooting
- Enter into trip mode by depressing once Set/store button,
then last trip cause is showed
- Each phase current is displayed in order whenever depress
UP/DN button in every once under trip mode
- The 2nd trip cause is showed after displaying 3phase current of last trip
- The 3rd trip can be checked by same manner

O-T Setting

IEC 947-4

(Curve)

(Trip Class)

1-5

10A

6-10

10

11-20

20

21-30

30

Curve-1 Inverse (SW3-INV/On position)

Test
This is the self-test of this product. If the relay enters into this mode, it
begins to count down preset value of O-time after waitng 3sec and
becomes trip state as showing END message that means this relay is
ready to work.
- END message of this test is also stored in Fault mode as last trip.
- Not permitted to test this function during the operation to prevent
unnecessary trip
Reset
Depressing the RESET button or interrupting control power resets the
relay immediately. Electrical remote reset is also available through the
panel mounted reset switch.

Curve-2 Definite (SW3-DEF/Off position)

11

EOCR-3DE/3EZ
MCU Based
3 Integral Current Transformers
Over-current, Under-Current, Phase Loss, Phase
Unbalance, Phase Reversal, Locked Rotor Protection
Digital Ammeter & Trip cause indication
Selectable Trip Time-Current Characteristics
Independently Adjustable Starting Trip Delay and
Operating Trip Time
+ Load Alerting Function
EOCR-3DE
+ Ground Fault Protection EOCR-3EZ
EOCR-3DE / 3EZ

Protection

Typical Wiring
EOCR-3DE

Protective Item
Over-current
Under-current
Phase Loss
Phase Unbalance
Phase Reversal
Locked Rotor
-

EOCR-3EZ
Trip Time
O-TIME
0.5~30 sec
3 sec
8 sec
0.1~0.3 sec
D-TIME
-

Protective Item
Over-current
Under-current
Phase Loss
Phase Unbalance
Phase Reversal
Locked Rotor
Ground Fault

Trip Time
O-TIME
0.5~30 sec
3 sec
8 sec
0.1~0.3 sec
D-TIME
0.05~10 sec

Specification
Model
Over Current Setting Range
Ground Fault Current Setting
Alert Setting
Start Delay Time Setting (D-TIME)
Trip Delay Time Setting (O-TIME) INV
DEF
Control Voltage
Contact Rating
OL
AL/GR
Rating
Time Characteristic
In/tcmode
dE/tcmode
Troubleshooting / Trip Indication
Current Sensing
Mounting

EOCR-3DE

EOCR-3EZ
Refer Table #1

50 ~ 100% / OFF

A: 0.02 ~ 3A / B: 0.2~10A
-

1 ~ 200 sec
1 ~ 30
0.2 ~ 30 sec
24VAC/DC, 110VAC 15%, 220VAC 15%
2-SPST
1-SPST
AL Relay
Ground Fault Relay
3A/250VAC Resistive
Inverse (See Curve-1)
Definite (See Curve-2)
LED Display (SSD+LED)
3-CT
35mm Din-rail

EOCR-3DE

Table #1. Current Range

Current Setting Range
(Amps)
0.5 ~ 60A
0.25 ~ 3.0A
0.1 ~ 1.2A
1 ~ 12A
1.5 ~ 18A
2.0 ~ 24A
2.5 ~ 30A
3.0 ~ 36A
4.0 ~ 48A
5 ~ 60A
6 ~ 72A
7.5 ~ 90A
10 ~ 120A
12 ~ 144A
15 ~ 180A
20 ~ 240A
25 ~ 300A
30 ~ 360A
40 ~ 480A
50 ~ 600A
60 ~ 720A
75 ~ 900A
80 ~ 960A

12

Number of Conductors
thru CT windows
1
2
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Extermal CT Ratio

Setting of CT Ratio

Remark

10 : 5
15 : 5
20 : 5
25 : 5
30 : 5
40 : 5
50 : 5
60 : 5
75 : 5
100 : 5
120 : 5
150 : 5
200 : 5
250 : 5
300 : 5
400 : 5
500 : 5
600 : 5
750 : 5
800 : 5

OFF(Mode : --)
2t
5t
10
15
20
25
30
40
50
60
75
100
120
150
200
250
300
400
500
600
750
800

Wide Range

EOCR-3EZ
Tolerance(3DD/ 3DZ / FD / FDZ / PMZ / SSD)
Current

Time

I<1A :
I 1A :

0.05A
5%

0.05s Within 0.05s

t 3s : 0.2S
t>3s : 5%

Caution
The extermal CT should be used in case Inverse curve(toln setting)
is applied over 10Amps.

EOCR-FDE/FEZ

Digital Over Current Relay

MCU Based
3 Integral Current Transformers
Over-current, Under-Current, Phase Loss, Phase
Unbalance, Phase Reversal, Locked Rotor Protection
Digital Ammeter & Trip cause indication
Selectable Trip Time Characteristics
Independently Adjustable Starting Trip Delay and Trip Time
+ Load Alerting Function
EOCR-FDE
+ Ground Fault Protection EOCR-FEZ

EOCR-FDE / FEZ

Protection

Typical Wiring
EOCR-FDE

Protective Item
Over-current
Under-current
Phase Loss
Phase Unbalancal
Phase Reverse
Locked Rotor
-

EOCR-FEZ
Trip Time
O-TIME
0.5~30 sec
3 sec
8 sec
0.1~0.3 sec
D-TIME
-

Protective Item
Over-current
Under-current
Phase Loss
Phase Unbalancal
Phase Reverse
Locked Rotor
Ground Fault

Trip Time
O-TIME
0.5~30
3 sec
8 sec
0.1~0.3 sec
D-TIME
0.05~10 sec

Specification
Model
Over Current Setting
Ground Fault Current Setting
Alert Setting
Start Time Setting (D-TIME)
Trip Time Setting (O-TIME)

EOCR-FDE
50 ~ 100% / OFF
INV
DEF

Control Voltage
Contact Rating

OL
AL/GR
Rating
In/tcmode
dE/tcmode

Time Characteristic
Troubleshooting / Trip Indication
Current Sensing
Mounting
Caution

EOCR-FEZ
Refer Table #1
: 0.02 ~ 3A / B: 0.2~10A
-

1 ~ 200 sec
1 ~ 30
0.2 ~ 30 sec
24VAC/DC, 110VAC 15%, 220VAC 15%
2-SPST
1-SPST
AL Relay
Ground Fault Relay
3A/250VAC Resistive
Inverse (See Curve-1)
Definite (See Curve-2)
LED Display (SSD+LED)
3-CT
35mm Din-rail

EOCR-FDE

The extermal CT should be used in case Inverse curve(tc ln setting) is applied over 10Amps.

How to set
Mode

DN
SET
store

Set
Adjust

UP

DN

Search a mode to be adjusted by depressing UP/DN mode switch.

Selected mode and setting value start flickering which means to be ready to accept
setting as pressing once Set/store button

UP

Store

SET
store

Reset

RESET

Select a required setting value and/or characters by pressing continuously

UP/DN mode switch until reaching what want to do.

EOCR-FEZ

Store a selected value and/or characters by pressing once Set/store button

lnstantaneously the flickering is stopped.
After completing above procedure, make a reset to be ready to operate.
lf not made reset, it will be reset automatically after an elapse of 30sec.

13

EOCR-3DM/FDM Series
Features
Compact Design
3DM : Panel Mounting Type
FDM : Flush Mounting Type
MCU(Microprocessor Control Unit) & ASIC Based
3 Integral Current Transformers
Multiple Protection Functions
Digital Ammeter
Troubleshooting / Trip Cause Memory, Display
Adjustable Operating Features by Pulse Rotary switch
Wide Current Adjustment Range
Selectable Time-Current Characteristics (Inverse / Definite)
Manual Instantaneous / Electrical Remote Auto Reset
Test Function
Ambient Insensitive
Selectable Fail-safe and Non-fail-safe Operation Modes

Digital Over Current Relay

Looping & External CT Option
Refer to page 10

Alert Function : 3DM & FDM

When motor operating current (In) exceeds the alert setting (As), the
alert relay outputs three kind of signal. The output can be used to warn
customers/operators of possible overloading and avoid unnecessary
motor shutdown.
The type of output signal is decided by the selection in the Alo mode
A(Ampere relay): energized whenever CT senses a current
F(Flickering): characterA and current value flash frequently
H(Holding): ON-OFF
Running state

Normal
(operation)

SettingALo

FlickerF
HoleH

Comparison Table of Model

EOCR
Protection

3sec

AuxA
3DM / FDM

Over - current
Under - current
Phase Loss
Phase Unbalance
Phase Reverse
Locked Rotor
Ground Fault
Run Monitor & Load Alert Function
Selectable Alerting Pulse

More then
preset(%) of Alert

3MZ / FMZ

In = Motor Operating Current / Is = EOCR Over-current Setting / As = Alert Setting

Fail-safe & Non-fail-safe

The tripping relay can be operatcd in a fail-safe or non-fail-safe mode

Application of the Fail-safe (Electrically Held) Connection

-

Faie safe setting in NVR mode : ON

The tripping relay is normally energized with control power supply

Application of the Non-fail-safe Connection

Fail safe setting in NVR mode: OFF
In all cases, the failure of the control voltage may not interrupt the process.

Protection Feature
Function DIP Switch

Over
current

Under
current

Control power on

Description

DEF
sw#3 on

When motor operating current(In) exceeds preset ocsetting,

relay will trip after preset O-Time in otsetting.
The amperage of In(operating current) does not effct on relay
trip time.

INV
sw#3 off

The tripping time of relay depends on the amperage of In(operating

current) according to time-current charateristics

96

97

98

95

96

(Non-Fail safe) 97

98

FS-(OFF)

Definite This is for idle/dry running protection

The relay operates when the operating current is less
time
charateristic than preset uc current after preset ut time elapses.

Phase
Loss

The relay will be operated within 3sec. when the phase

failure occurs
This function works during D-Time.

Phase
Unbalance

The relay operates within 8sec. when the current diffenence

among 3 phases is greater than 50%
The calculation formula is(Max-Min)/Max current 100 50%

Phase
Reversal

In the event of wrong phase sequence, relay will be operated

on : enable in 0.1sec.
off : disable Phase reversal protection function can be disabled by
DIP selection.

Ground
Fault

A Type:
0.03-2.5A
B Type :
0.5-10A

Ground fault protection is provided by the relay tripping

sensed by Zero Phase Current Transformer
(Core Balanced Current Transformer)
The relay shows the leakage current during operation
(3MZ & FMZ)

Locked
Rotor

The setting range is 2-10 times of oc setting.

If the starting current exceeds more than setting value after preset
D-Time elapses, the relay will be energized within 0.5sec.
This function is available on definite time characteristic.

Stall

The setting range is 1-10sec.

If the operating current exceeds more than 180% of preset
oc setting the relay will be energized after preset st time
elapses.

14

95

FS:ON
(Fail safe)

Ralay Trip

Tolerance (3DM/ FDM / EVR Series)

Current

Time

I<1A :
I 1A :

0.1A
5%

0.05s Within 0.05s

t<1s : 0.1s
t 1s : 5%

Trip

EOCR-3DM/FDM Series
LED Display

Digital Over Current Relay

Examples of Trip Cause Indication
Over-current Trip
Relay displays a trip, caused by maximun over-current.
10.7A which has been detected from phase L3(T/T3)
Under-current Trip
Relay displays a trip, caused by minimum Under-current.
1.14A which has been detected from pfase L2(S/T3)

Digital Ammeter
3 phase motor currents (In) are displayed in sequence on the LED display.
3DM/FDM

Locked Rotor Trip

Relay displays a trip, caused by locked rotor and maximum
current. 26.9A which has been detected from pfase L1(R/T1)
Locked Rotor Trip
Relay displays a trip, caused by locked rotor while
motor is working
Phase reversal Trip
Relay displays a trip, caused by phase reversal
Phase Unbalance Trip
Relay displays a trip, caused by Phase unbalance and maximum
current 2.78A which has been detected from phase L1(R/T1)
Phase Loss Trip
Relay displays a trip, caused by phase loss which has
been detected from phase L1(R/T1)
Phase Loss Trip
Relay displays a trip, caused by phase loss which has
been detected from phase L2(S/T2)

3MZ/FMZ

Phase Loss Trip

Relay displays a trip, caused by phase loss which has
been detected from phase L3(T/T3)
Ground Fault Trip
Relay displays a trip, caused by ground fault current
0.6A which has been detected from ZCT

Time-Current Characteristic Curve

Refer to Curve-1 and Curve-2 on page 11
Setting Step of 3DM & FDM
Digital Trip Cause Indication / Easy Troubleshooting
- Enter into FAULT mode with mode switch by depressing once
Set/store button, then last trip cause is shown
- Each phase current is displayed in order whenever turn mode
switch right or left
Test
This is the self-test of this product. If the relay enters into this mode,
it begins its count down preset value of O-time of Ot mode after
waiting 3sec and becomes trip state as showing END message
that means this relay is ready to work.
- END message of a result of this test is also stored in Fault
mode as last trip.
- Not permitted to test this function during the operation to prevent
unnecessary trip

MODE

Select the mode to adjust with turning

the MODE/Adjust swith CW or CCW.

Set

Depress the SET/store button once to start the setting

Adjust

Adjust the required amount with MODE/Adjust switch

Store

Depress the SET/store button once to memorize the setting

Reset
Pushing the RESET button or interrupting power resets the relay
immediately. Electrical remote reset is also available through the
panel mounted reset switch. The relay cannot be reset by control
power interruption when the hand reset (H-r) selected in mode.
In this case, it is possible to press the reset button on the relay facia.
Automatic reset is also available if enter into reset mode (rt:A-r) and
reset delay time is adjustable from 0.3sec to 20min

15

EOCR-3DM/3MS/3MZ/3M420

MCU & ASIC Based Overload Relay

Over-current, Under-current, Phase Loss, Phase reversal,

Phase Unbalance, Locked rotor protection
Short current protection 3MS
Ground Fault Protection 3MZ
Current Loop Commeunication 3M420
Including Current Tranducer : 4~20mA output
Accummulation to Running time

EOCR-3DM / 3MS / 3MZ / 3M420

Protection
Trip Time
Protective Item
Over-current
Under-Current
Phase loss
Phase reversal
Phase Unbalance
Locked Roter

Lock
stall

Ground fault
Short circuit

3DM
DEF: 0.2 ~ 30sec, INV: 1 ~ 30
0.5 ~ 30sec(DEF)
3sec
0.1sec
8sec
0.5sec after dt
1 ~ 10sec
-

3MS
DEF: 0.2 ~ 30sec, INV: 1 ~ 30
0.5 ~ 30sec(DEF)
3sec
0.1sec
8sec
0.5sec after dt
1 ~ 10sec
0.05sec

3MZ
DEF: 0.2 ~ 30sec, INV: 1 ~ 30
0.5 ~ 30sec(DEF)
3sec
0.1sec
8sec
0.5sec after dt
1 ~ 10sec
0.1 ~ 10sec
-

3M420
DEF: 0.2 ~ 30sec, INV: 1 ~ 30
0.5 ~ 30sec(DEF)
3sec
0.1sec
8sec
0.5sec after dt
1 ~ 10sec
-

3DM
Refer to, Table #1
0.5 ~ under OC setting
OFF ~ 200sec
DEF : 0.2 ~ 30sec / INV : 1 ~ 30
0.5 ~ 30sec(DEF)
24VAC/DC
85 ~ 250VAC/DC, 50/60Hz
2-SPST, 3A/250VAC, Resistive
1-SPST(AL)
-30 ~ 80
-20 ~ 60
30 ~ 85RH, Without condensation

3MS
Refer to, Table #1
0.5 ~ under OC setting
OFF ~ 200sec
DEF : 0.2 ~ 30sec / INV : 1 ~ 30
0.5 ~ 30sec(DEF)
0.05sec
24VAC/DC
85 ~ 250VAC/DC, 50/60Hz
2-SPST, 3A/250VAC, Resistive
1-SPST(S.C)
-30 ~ 80
-20 ~ 60
30 ~ 85RH, Without condensation

3MZ
Refer to, Table #1
0.5 ~ under OC setting
A : 0.03 ~ 2.5A / B : 0.5 ~ 10A
OFF ~ 200sec
DEF : 0.2 ~ 30sec / INV : 1 ~ 30
0.5 ~ 30sec(DEF)
0.1 ~ 10sec
24VAC/DC
85 ~ 250VAC/DC, 50/60Hz
1-SPST, 3A/250VAC, Resistive
1-SPST(GR)
-30 ~ 80
-20 ~ 60
30 ~ 85RH, Without condensation

3M420
Refer to, Table #1
0.5 ~ under OC setting
OFF ~ 200sec
DEF : 0.2 ~ 30sec / INV : 1 ~ 30
0.5 ~ 30sec(DEF)
24VAC/DC
85 ~ 250VAC/DC, 50/60Hz
2-SPST, 3A/250VAC, Resistive
-30 ~ 80
-20 ~ 60
30 ~ 85RH, Without condensation

35mm Din-rail

35mm Din-rail

35mm Din-rail

35mm Din-rail

Specification
Model
Current Setting
Range
Time Setting

Short circuit
Control Power
Contact Rating
Environment

Over-Current(oc)
Under-Current(uc)
Ground Fault Current(Ec)
Starting Delay T ime(dt)
Over-Current Trip Delay(ot)
Under-Current Trip Delay(ut)
Ground Fault Trip Delay(Et)
24
220
OL
AL(GR/SC)
Temperature

Store
Operation

Humidity
7-Segment LEDs
Bar-Graph

Display
Mounting

Table #1. Current Range

Type
05
05
05
6000
200000
10
15
20
25
30
40
50
60
75
100
120
150
200
250
300
400
500
600
750
800

16

Current Setting range

0.1 ~ 2.0A
0.25 ~ 5.0A
0.5 ~ 10A
5 ~ 70A
5 ~ 20A
1.0 ~ 12A
1.5 ~ 18A
2.0 ~ 24A
2.5 ~ 30A
3.0 ~ 36A
4.0 ~ 48A
5.0 ~ 60A
6.0 ~ 72A
7.5 ~ 90A
10 ~ 120A
12 ~ 144A
15 ~ 180A
20 ~ 240A
25 ~ 300A
30 ~ 360A
40 ~ 480A
50 ~ 600A
60 ~ 720A
75 ~ 900A
80 ~ 960A

Naumber of Conductord
thru CT windows
5
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Position of DIP S/W4

External CT ratio

05
05
05
60
20
05
05
05
05
05
05
05
05
05
05
05
05
05
05
05
05
05
05
05
05

NIL
NIL
NIL
NIL
NIL
10 : 5
15 : 5
20 : 5
25 : 5
30 : 5
40 : 5
50 : 5
60 : 5
75 : 5
100 : 5
120 : 5
150 : 5
200 : 5
250 : 5
300 : 5
400 : 5
500 : 5
600 : 5
750 : 5
800 : 5

Setting of CT Mode
Remark
5t
5t
05
60
20
10
15
20
25
30
40
50
60
75
100
120
150
200
250
300
400
500
600
750
800

EOCR-FDM/FMS/FMZ/FM420

MCU & ASIC Based Overload Relay

Over-current, Under-current, Phase Loss, Phase reversal,

Phase Unbalance, Locked rotor protection
Short current protection FMS
Ground Fault Protection FMZ
Current Loop Commeunication FM420
Including Current Tranducer : 4~20mA output
Accummulation to Running time

EOCR-FDM / FMS / FMZ / FM420

Protection
Trip Time
Protective Item
Over-current
Under-Current
Phase loss
Phase reversal
Phase Unbalance
Locked Roter

Lock
stall

Ground fault
Short circuit

FDM
DEF: 0.2 ~ 30sec, INV: 1 ~ 30
0.5 ~ 30sec(DEF)
3sec
0.1sec
8sec
0.5sec after dt
1 ~ 10sec
-

FMS
DEF: 0.2 ~ 30sec, INV: 1 ~ 30
0.5 ~ 30sec(DEF)
3sec
0.1sec
8sec
0.5sec after dt
1 ~ 10sec
0.05sec

FMZ
DEF: 0.2 ~ 30sec, INV: 1 ~ 30
0.5 ~ 30sec(DEF)
3sec
0.1sec
8sec
0.5sec after dt
1 ~ 10sec
0.1 ~ 10sec
-

FM420
DEF: 0.2 ~ 30sec, INV: 1 ~ 30
0.5 ~ 30sec(DEF)
3sec
0.1sec
8sec
0.5sec after dt
1 ~ 10sec
-

FDM
Refer to, Table #1
0.5 ~ under OC setting
OFF ~ 200sec
DEF : 0.2 ~ 30sec / INV : 1 ~ 30
0.5 ~ 30sec(DEF)
24VAC/DC
85 ~ 250VAC/ DC, 50/60Hz
2-SPST, 3A/250VAC, Resistive
1-SPST(AL)
-30 ~ 80
-20 ~ 60
30 ~ 85RH, Without condensation

FMS
Refer to, Table #1
0.5 ~ under OC setting
OFF ~ 200sec
DEF : 0.2 ~ 30sec / INV : 1 ~ 30
0.5 ~ 30sec(DEF)
0.05sec
24VAC/DC
85 ~ 250VAC/ DC, 50/60Hz
2-SPST, 3A/250VAC, Resistive
1-SPST(S.C)
-30 ~ 80
-20 ~ 60
30 ~ 85RH, Without condensation

FMZ
Refer to, Table #1
0.5 ~ under OC setting
A : 0.03 ~ 2.5A / B : 0.5 ~ 10A
OFF ~ 200sec
DEF : 0.2 ~ 30sec / INV : 1 ~ 30
0.5 ~ 30sec(DEF)
0.1 ~ 10sec
24VAC/DC
85 ~ 250VAC/ DC, 50/60Hz
1-SPST, 3A/250VAC, Resistive
1-SPST(GR)
-30 ~ 80
-20 ~ 60
30 ~ 85RH, Without condensation

FM420
Refer to, Table #1
0.5 ~ under OC setting
OFF ~ 200sec
DEF : 0.2 ~ 30sec / INV : 1 ~ 30
0.5 ~ 30sec(DEF)
24VAC/DC
85 ~ 250VAC/ DC, 50/60Hz
2-SPST, 3A/250VAC, Resistive
-30 ~ 80
-20 ~ 60
30 ~ 85RH, Without condensation

35mm Din-rail

35mm Din-rail

35mm Din-rail

35mm Din-rail

Specification
Model
Current Setting
Range
Time Setting

Short circuit
Control Power
Contact Rating
Environment

Display
Mounting

Over-Current(oc)
Under-Current(uc)
Ground Fault Current(Ec)
Starting Delay T ime(dt)
Over-Current Trip Delay(ot)
Under-Current Trip Delay(ut)
Ground Fault Trip Delay(Et)
24
220
OL
AL(GR/SC)
Temperature

Store
Operation

Humidity
7-Segment LEDs
Bar-Graph

Table #1. Current Range : Same as Table#1 on page 16

Caution : The extermal CT should be used in case Inverse curve(toln setting) is applied over 10Amps.

17

EOCR-FDM/FMS/FMZ/FM420
Typical Wiring

18

EOCR-3DM

EOCR-FDM

EOCR-3MS

EOCR-FMS

EOCR-3MZ

EOCR-FMZ

EOCR-3M420

EOCR-FM420

EOCR-M1 Series

Digital Over Current Relay

Features
MCU(Microprocessor Control Unit) Based
Convenient installation
- PMZ : Panel Mounting Type
- PFZ : Panel Flush Mounting Type
Easy to set
3 Integral Current Transformers
Multiple Protection Functions
Wide range protection from 0.1A to 3600A by just 1 model
Built-in digital ammeter
Total running time display
Current display like L1 L2 L3 GF
Bar-Graph monitoring on impending overload trip
Selectable time-current characteristics [Inverse / Inverse based on
thermal Memory(Thermal Inverse) / Definite]
4~20mA current loop communcations
Test function
Selectable Fail-safe operation / No volt Release (FS : ON)
Operates in wide ambient temperature range

Looping Option
Smaller ampere ranges than particular EOCR current range can be
covered by looping the motor wire 2 or 3 times as under described.
No of Loops Current Ratio Current Setting
of Ext. CT
Range (A)
0.5 Type
Looping
Option

0
1
2
3
4

1
2
3
4
5

0.5 - 10
0.25 - 6
0.17 - 3.3
0.12 - 2.5
0.1 - 2

Looping Option (1-Loop)

Protection Feature
Function

Description
When the motor operating current(In) exceeds preset oc
setting, the relay will trip after preset O-Time in ot setting
The amperage of In(operating current) will not effoet relay
trip time.

Otc:dE
Selection
Curve-2

The tripping time of relay depends on the amperage of In

(operating current) according to time-current charateristics

Otc:In
Selection
Curve-1

Thermal Inverse characteristics is adopted inverse

time-current charateristics based on thermal memory.
If Otc:dE or Otc:In is selected, accumulated thermal
memory is cleared (Automatically reset)

Otc:th

UnderCurrent

This is for idle/dry running protection.

The relay operates when the operating current is less
than preset uc current after preset ut time elapses.

Definite
time

Phase
Loss

The relay will be operated within 3sec. when the phase

failure occurs.
This function works during D-Time. If this function is not
necessary, it can be deleted by selected PL:oFF

PL:on
Selection

Phase
Unbalance

The relay operates within 8sec. when the current diffenence Ub:6
shows 6%
among 3phases is greater than preset % of unbalance.
selected
The calculation formula is (Max-Min)/Max current 100

Phase
Reversal

In the event of wrong phase sequence, relay will be operated

RP:on
in 0.1sec.
Phase reversal protection function can be disabled by setting Selection
RP:oFF

Ground
Fault

Ground fault protection is provided by the relay tripping

sensed by Zero. Phase Current Trasformer
(Core Balanced Current Transformer) The relay shows the
leakage current during operation. The characteristic of
operating time can be selected for Etc:dE or In.

Definite
0.03-10A

Locked
Rotor

The setting range is 2-10 times of oc setting.

If the starting current exceeds more than setting value after
preset D-Time elapses, the relay will be energized within
0.5sec.
This function is available on definite time characteristic
It can be deleted by setting Lc:oFF

Disable on
inverse
charateristic

The setting range is 1-10sec.

If the operating current exceeds more than 180% of preset
oc setting, the relay will be energized after the preset
st time elapses.
It can be deleted by setting Sc:oFF which makes St:oFF
automatically(operating time of stall)

Disable on
inverse
charateristic

OverCurrent

Comparison Table of Model

EOCR
Protection

PMZ

FMZ

Over - current
Under - current
Short - current
Phase Loss
Phase Unbalance
Phase Reverse
Locked Rotor
Ground Fault
Current output 4~20mA

External CT Option
Higher ampere ranges can be achieved by setting CT Ratio in ct
mode to take an external current transformer, and the actual motor
current display can be provided
Current Setting Range Number of Conductors
Extermal CT Ratio Setting of CT Ratio
(Amps)
thru CT windows
0.5 ~ 60A
1
OFF
0.25 ~ 3.0A
2
2t
0.1 ~ 1.2A
5
5t
1 ~ 12A
1
10 : 5
10
1.5 ~ 18A
1
15 : 5
15
2.0 ~ 24A
1
20 : 5
20
2.5 ~ 30A
1
25 : 5
25
3.0 ~ 36A
1
30 : 5
30
4.0 ~ 48A
1
40 : 5
40
5 ~ 60A
1
50 : 5
50
6 ~ 72A
1
60 : 5
60
7.5 ~ 90A
1
75 : 5
75
10 ~ 120A
1
100 : 5
100
12 ~ 144A
1
120 : 5
120
15 ~ 180A
1
150 : 5
150
20 ~ 240A
1
200 : 5
200
25 ~ 300A
1
250 : 5
250
30 ~ 360A
1
300 : 5
300
40 ~ 480A
1
400 : 5
400
50 ~ 600A
1
500 : 5
500
60 ~ 720A
1
600 : 5
600
75 ~ 900A
1
750 : 5
750
80 ~ 960A
1
800 : 5
800
100 ~ 1200A
1
1000 : 5
1000
120 ~ 1800A
1
1500 : 5
1500
200 ~ 3000A
1
2000 : 5
2000
250 ~ 3000A
1
2500 : 5
2500
300 ~ 3600A
1
3000 : 5
3000

Selection

Remark
Wide Range

Stall

inverse
0.03-1.0A

During
D-Time

After
D-Time

19

EOCR-M1 Series
LED Display

Digital Over Current Relay

Examples of Trip Cause Indication
Over-current Trip
Operated by max.current among 3 phases
Under-current Trip
Operated by min.current among 3 phases

Digital Ammeter
3 phase motor currents (In) and ground(earth) leakage current are
displayed in sequence on the LED display.

Locked Rotor Trip

Operated by Locked Rotor in starting state
The highest current is L1 phase
Stall Trip
Operated by Locked Rotor in operating state
L1 phase current reachis stall setting volue
Phase Reversal Trip
Operated by Reversal Trip
Phase Unbalance Trip
Operated by Phase Unbalance Trip
The Lowest current in L2 phase
Phase Loss Trip
Phase Loss Trip
The indication Shows L1 phase loss.

Digital Trip Cause Indication / Easy Troubleshooting

When EOCR-M1 series relay trips, the cause of trip is displayed on the
LED display. The displayed trip cause assures easy troubleshooting
Fail-safe & Non-fail-safe

Ground Fault Trip

Operated by Ground fault current
Each phase current is displayed in order whenever depress UP/DN switch every once
after entering into trip mode

The tripping relay can be operated in a fail-safe or non-fail-safe mode

Time-Current Characteristic Curve

Application of the Fail-safe Connection

O-T Setting
1-5
6-10
11-20
21-30

Fail safe setting inFS mode : ON

The tripping relay is normally energized with control power supply

Application of the Non-fail-safe Connection

In all cases, the failure of the control voltage may not interrupt the process.
Control power on

95

96

97

98

95

96

(Non-Fail safe) 97

98

FS:ON
(Fail safe)
FS-(OFF)

Ralay Trip

Test
This is the self-test of this product, checking function of sequence
after the installation. If the relay enters into this mode, it begins its
count down preset value of O-Time after waiting 3sec and
becomes trip state as showing END message that means this
relay is ready to work END message of this test is also stored in
Fault mode as last trip. While motor is running, output relay
contact is not switched to prevent unnecessary trip
Reset
It can be selected by rt:H-r, rt:E-r or rt:A-r in rt mode.
The rt means reset type and the meaning of H-r, E-r and A-r are
hand, electrical and auto reset respectively.
The relay can be reseted by depressing the reset button on relay
facia -rt:H-r, interruption of control power on A1, A2-rt:E-r and by
setting of automatic reset time from 0.2sec to 20min(indication :
20n) -rt:A-r and A:0.3

20

IEC 947-4(Trip Class)

10A
10
20
30

Curve-1 Inverse

Curve-2 Definite

Curve-3
Inverse time characteristics of EC
(Ground current range : 0.03~1A)

EOCR-PMZ

Digital Over Current Relay

MCU Based / Panel Mounting Type
3 Integral Current Transformers
Over-current, Under courrent, Phase Loss,
Phase Unbalance, Phase Reversal, Ground Fault.
Locked Rotor Protection and current output(4~20mA)
Digital Ammeter & Easy Troubleshooting
Bar-graph Type LED Display
Selectable Trip Time-Current Characteristics
Independently Adjustable Starting Trip Delay
and Operating Time

EOCR-PMZ

Protection
Protective Item
Over-current
Under-Current
Phase reversal
Phase Unbalance

Typical Wiring
Trip Time
O-TIME
Preset Ut time
0.1~0.3sec
8sec

EOCR-PMZ
Protective Item
Ground fault
Locked Rotor
Stall

Trip Time
Preset Et time
0.5sec after d-time
0.05~10sec

Specification
Model
Current Setting
Range

Time Setting

Over-Current(oc)
Under-Current(uc)
Ground Fault Current(Ec)

Starting Delay T ime(dt)

Over-Current Trip Delay(ot)
Under-Current Trip Delay(ut)

Tolerance
Control Power
Contacts Rating
Environment

Display
Insulation
Dielectric Strength

Ground Fault Trip Delay(Et)

Ground Failt Starting Delay(Ed)
Current
Time
24
220
OL
GR
Temperature
Store
Operation
Humidity
7-Segment LEDs
Bar-Graph

Between casing and circuit

Between open contacts
Between circuit
Electrostatic Discharge IEC61000-4-2
Radiated Electromagnetic Field Disturbance IEC61000-4-3
EFT / Burst
IEC61000-4-4
Surge
IEC61000-4-5
1MHz Burst disturbance
IEC61000-4-12
Conducted Emission
EN55011

PMZ
Refer to current setting range( page 19 )
Off / 0.5 ~ less than oc setting
Off
0.3 ~ 10A : definite time characteristics
0.3 ~ 1A definite / inverse time characteristics, selectable
Off ~ 200sec, Adjustable
Definite Time
0.2 ~30sec
Inverse Time
1.0 ~ 30class(30curves)
0.5 ~ 30sec, definite time characteristics, if uc mode is OFF,
then OFF is displayed automatically in ut mode
Definite / Inverse : 0.05, 0.1 ~ 1 ~ 10sec(curve-3)
OFF / 1~ 10sec
5%
5%
24VAC/DC
85 ~ 250VAC/DC, 50/60Hz
2-SPST
3A / 250VAC Resistive
1-SPST
3A / 250VAC Resistive
-30 ~ 80
-20 ~ 60
30 ~ 85% RH Non-Condensing
3 Phase current, Trip cause, Operating hour
Load factor for current setting(50 ~ 100%)
Between casing and circuit : over 10 , DC500V
Between casing and circuit
2000VAC, 60Hz, 1min
Between open contacts
1000VAC, 60Hz, 1min
Between circuit
2000VAC, 60Hz, 1min
Lever 3 : Air Discharge : 8kV, Contact Discharge : 6kV
Lever 3 : 10V/m, 150MHz & 450MHz Portable transceiver
Lever 3 : 2kV, 1min
Lever 3 : 1. 50 , 4kV(0 , 90 , 180 , 270 )
Lever 3 : 2.5kV, 1MHz
Class B

EOCR-PMZ (Terminal Type)

21

EOCR-PFZ

Digital Over Current Relay

MCU Based / Panel Mounting Type
3 Integral Current Transformers
Over-current, Under courrent, Phase Loss,
Phase Unbalance, Phase Reversal, Ground Fault.
Locked Rotor Protection and current output(4~20mA)
Digital Ammeter & Easy Troubleshooting
Bar-graph Type LED Display
Selectable Trip Time-Current Characteristics
Independently Adjustable Starting Trip Delay and Trip Time

EOCR-PFZ

Protection
Protective Item
Over-current
Under-Current
Phase reversal
Phase Unbalance

Typical Wiring
Trip Time
O-TIME
Preset Ut time
3sec
8sec

EOCR-PFZ
Protective Item
Short Circuit
Ground fault
Locked Rotor
Stall

Trip Time
0.03~0.05sec
Preset Et time
0.5sec after d-time
0.05~10sec

Specification
Model
Current Setting
Range

Time Setting

Over-Current(oc)
Under-Current(uc)
Ground Fault Current(Ec)

Starting Delay T ime(dt)

Over-Current Trip Delay(ot)
Under-Current Trip Delay(ut)

Tolerance
Control Power
Contact Rating
Environment

Display
Insulation
Dielectric Strength

Ground Fault Trip Delay(Et)

Ground Failt Starting Delay(Ed)
Current
Time
220
OL
GR
Temperature
Store
Operation
Humidity
7-Segment LEDs
Bar-Graph

Between casing and circuit

Between open contacts
Between circuit
Electrostatic Discharge
IEC61000-4-2
Radiated Electromagnetic Field Disturbance IEC61000-4-3
EFT / Burst
IEC61000-4-4
Surge
IEC61000-4-5
1MHz Burst disturbance
IEC61000-4-12
Conducted Emission
EN55011

22

PFZ
Refer to current setting range( page 19 )
Off / 0.5 ~ less than oc setting
Off
0.3 ~ 10A : definite time characteristics
0.3 ~ 1A definite / inverse time characteristics, selectable
Off ~ 200sec, Adjustable
Definite Time
0.2 ~30sec
Inverse Time
1.0 ~ 30class(30curves)
0.5 ~ 30sec, definite time characteristics, if uc mode is OFF,
then OFF is displayed automatically in ut mode
Definite / Inverse : 0.05, 0.1 ~ 1 ~ 10sec(curve-3)
OFF / 1~ 10sec
5%
5%
85 ~ 250VAC/DC, 50/60Hz
2-SPST
3A/250VAC Resistive
1-SPST
3A/250VAC Resistive
-30 ~ 80
-20 ~ 60
30 ~ 85% RH Non-Condensing
3 Phase current, Trip cause, Operating hour
Load factor for current setting(50 ~ 100%)
Between casing and circuit : over 10 , DC500V
Between casing and circuit
2000VAC, 60Hz, 1min
Between open contacts
1000VAC, 60Hz, 1min
Between circuit
2000VAC, 60Hz, 1min
Lever 3 : Air Discharge : 8kV, Contact Discharge : 6kV
Lever 3 : 10V/m, 150MHz & 450MHz Portable transceiver
Lever 3 : 2kV, 1min
Lever 3 : 1. 50 , 4kV(0 , 90 , 180 , 270 )
Lever 3 : 2.5kV, 1MHz
Class B

EOCR-PFZ (Terminal Type)

DCL/DUCR Electronic DC Current

DOCR-S/H

Electronic DC Current

Features
DC Overcurrent Relay for DC Motor
The milli-volt( ) signals generated from the Shunt and power supply are
sensed by solid state circuitry and compared with preset overload setting.
In case sensing overload condition, the internal relay switches contact
after the preset delay. It has easier control operation.
It has DC Overload and DC Underload protection relays.
It has wide DC current protection range from 1A to hundreds Amps.
DC Ammeter maybe used instead of Shunt
(DC Ammeter has its own shunt inside and keep 50mV maintained.)

Features
MCU (Microprocessor Control Unit) Based
DC Motor / DC Device Protection
Sensing by Shunt (DOCR-S) / by Hall Sensor (DOCR-H)
Actual primary current is displayed after Shunt
/ Hall Sensor setting. (Indication)
Digital Setting / Tripped Current digital DATA displayed. (Indication)
Auto Reset / Reset Time Setting
Confirm Setting Current / Test Function
No Volt Release function (Fail-safe Operation) Setting ( NVR Setting)

Protection

Protection
Trip Time

Protective Item

DCL
O-TIME
-

Over-current
Undercurrent (Dry-run)

DUCR
O-TIME

Specification
Type

Trip Time Setting

Reset

70
O-TIME
M
A
Voltage

220
440

Frequency
Contact Rating
Mounting

Trip Time
O-TIME(Definite)

In case the line voltage is same voltage with control voltage of DOCR-S type,
Contact our representative or our head office.

Specification

Current Setting

Indication
Power Supply

Protective Item
Over-current

N
R

Setting Range(DCL)
Setting Range(DUCR)
DC Over-current Relay
DC Under-current Relay
Secondary Voltage of Shunt (10~70m VCD)
30sec(Adjustable)
Manual(Instantaneous) / Electrical(Remote)
Auto(Instantaneous) Reset(Option)
LED
110 / 220VAC
Other Voltage(Option)
380 / 440VAC
50 / 60Hz
Normally Energized
Normally De-energized
Panel

Current Setting

O-TIME
Reset Time
Rated Shunt
Rated Hall Sensor
Power Supply
Voltage

24
220

Frequency
Reset
Contact Rating

Mode
Rating

Indication
Mounting

Typical Wiring

Setting Range
Setting Range
(DOCR/DUCR-S)
(DOCR/DUCR-H)
0.1 ~ 240A
5 ~ 360A
0.5 ~ 25sec
0.5 ~ 25sec
0.5 ~ 25sec
0.5 ~ 25sec
1A, 2A, 5A, 10A, 20A,
50A, 110A, 200A
50A, 100A, 200A, 300A
24VAC/DC
24VAC/DC
85 - 250VAC/DC
85 - 250VAC/DC
50/60Hz
Manual / Electrical / Auto Reset
1-SPDT(1C)
3A/ 250VAC Resistive
7Segment LED
Panel

Typical Wiring

EOCR-S

EOCR-H

23

EUCR

Electronic Undercurrent Relay

EUCR-3C Electronic Undercurrent Relay

Features
Compact Design
Two Integral Current Transformers
Under-load Protection (Dry-run Protector)
Wide Current Adjustment Range
Definite Trip Time Characteristic
Manual (instantaneous) / Electrical (Remote) Reset
Ambient Insensitive
Non-fail-safe Operation

Features
Compact Design
Three Integral Current Transformers
Under-load Protection / Dry-run Protector
Wide Current Adjustment Range
Definite Trip Time Characteristic
Manual (instantaneous) / Electrical (Remote) Reset
Ambient Insensitive
Fail-safe Operation

Protection

Protection

Protective Item
Undercurrent (Dry-run)

Trip Time
O-TIME

Specification

Specification

Current Setting

Type
05
30
60
100 - 600

Trip Time Setting

Reset
Time-current Characteristics
Power Supply
Voltage

O-TIME

Contact Rating

Frequency
Mode
Rating
Status

Mounting

24
110
220

Setting Range
0.5 - 6A
3.0 - 30A
5.0 - 60A
05 Type fitted to External CT
(Current Ratio: 100/5A - 600/5A)
0.2 - 30 sec
Manual (Instantaneous) / Electrical (Remote)
Definite
24VAC/DC
110VAC
220VAC
50/60Hz
1-SPDT (1C)
3A/250VAC Resistive
Normally De-energized
35mm DIN-rail / Panel

Current Setting

Type
05
30
60
100 - 600

Trip Time Setting

Reset
Time-current Characteristics
Power Supply
Voltage

O-TIME

Contact Rating

Frequency
Mode
Rating
Status

Mounting

24
110
220

Setting Range
0.5 - 6A
3.0 - 30A
5.0 - 60A
05 Type fitted to External CT
(Current Ratio: 100/5A - 600/5A)
0.2 - 30 sec
Manual (Instantaneous) / Electrical (Remote)
Definite
24VAC/DC
110VAC
220VAC
50/60Hz
2-SPST (1a1b)
3A/250VAC Resistive
Normally Energized
35mm DIN-rail / Panel

Typical Wiring

Typical Wiring

Normally De-energized

24

Trip Time
O-TIME

Protective Item
Undercurrent (Dry-run)

Normally Energized

EVR

Electronic AC Voltage Relay

EVR-PD/FD Digital AC Voltage Relays

EVR-PD

Features
Compact Design
Multiple Protection Functions
24 Hours Trip Cause Memory
Trip Indication & Troubleshooting
Manual / Electrical Reset
Ambient Insensitive

Ascertain Button

Protection
Trip Time
OVR-TIME
UVR-TIME
0.5 sec
0.5 sec

Specification

Phase Loss Trip Time

Phase Reversal Trip Time
Time-current Characteristic
Contact Rating
Reset

OVR-VOLT
UVR-VOLT
OVR-TIME
UVR-TIME

M
A

TEST
ASCERTAIN S/W
(Trip Cause Indication)
Allowable Tolerance

Typical Wiring

Trip Time (EVR-PD/FD)

OVR-TIME
UVR-TIME
2 sec
0.1 sec
3 sec

Protective Item
Over-voltage
Under-voltage
Phase Loss
Phase Reversal
Voltage Unbalance

Specification

Rated Voltage

Trip Time Setting

Features
MCU & ASIC Based Compact Design
Multiple Protection Functions
Wide Voltage Adjustment Range
Digital Volt Meter and Digital Setting
Trip Cause Display & Easy Troubleshooting
Manual / Electrical / Automatic Reset
Adjustable Reset Timer
Ambient Insensitive
Protection

Protective Item
Over-voltage
Under-voltage
Phase Loss
Phase Reversal

Voltage Setting

EVR-FD

Voltage
Time

EVR - 220
220V
220 - 300V
160 - 220V

EVR - 380
EVR-415
380V
415V
380 - 460V
415 - 500V
300 - 380V
340 - 415V
0.5 - 2 sec
1 - 5 sec
within 0.5 sec
within 0.5 sec (after Supply Power)
Definite
1-SPDT(1C), 5A/250VAC Resistive
Manual Reset
Automatic Reset (Reset Time = 5 sec)
Trip in 1 sec (after Pushing TEST Button)
Trip Cause is memorized for 24 hours and
Trip Cause will be indicated via LED
by pushing Ascertain S/W.
5%
15%

Voltage Setting

Type
110
220
440
O-TIME
U-TIME
220
Others
Mode
Rating
Status
SW3=AUTO
SW3=MAN

Trip Time Setting

Control Voltage
Contact Rating

Reset
Mounting

PD
FD

DCU
PCU

Over-voltage (O-VOLT) Under-voltage (U-VOLT)

110 - 150V
80 - 120V
220 - 300V
160 - 240V
380 - 500V
300 - 440V
0.5 - 10 sec
0.5 - 10 sec
AC/DC85 - 250V
AC/DC24, 48V (Optional Order)
1-SPDT(1C)
3A/250VAC Resistive
Normally Energized
Reset Time: 1 or 5 sec (DIP-SW4)
RESET Button
35mm Din-Rail / Panel
Flush
35mm DIN-Rail / Panel

Typical Wiring

25

DOVR/DUVR Electronic DC Voltage Relay

DVR

Electronic DC Voltage Relay

Features
Compact Design
Definite Trip Time-current Characteristic
Trip & Run Indication (LED)
Confirm actual current and precise setting possible as it has
Voltage Meter.
Solid State DC Over-voltage / Undervoltage Protection.

Features
MCU (Microprocessor Control Unit) Based
DC Motor / DC Device Protection
Separate Setting for Over-voltage and Undervoltage
Line Voltage Indicative Function (FND)
Digital Setting / Trip Cause Indication
Auto Reset / Reset Time Setting
Confirm Setting Value / TEST Function
No Volt Release Function (Fail-safe Operation) Setting
( NVR Setting)

Protection

Protection
Trip Time

Protective Item

DOVR
O-TIME
-

Over-voltage
Undervoltage

DUVR
O-TIME

Specification
Model
Voltage Setting

Trip Time Setting Trip Delay

Reset
Control Voltage
Contact Rating

Mode
Status

Mounting

Typical Wiring

26

Protective Item
Over-voltage
Undervoltage

Trip Time
O-TIME
O-TIME

Specification
Type
10
30
110
220
Others
O-TIME
M
A
220
Others
1-SPDT(1C)
R Type

DC Over-voltage
DC Undervoltage
Voltage Setting Range
1 ~ 10V
3 ~ 30V
3 ~ 30V
10 ~ 110V
20 ~ 110V
20 ~ 220V
30 ~ 220V
Option
0.2 ~ 30sec
Manual(Instantaneous) / Electrical Reset
Auto (Option)
110/220VAC, 50/60Hz
Other Voltage Option
3A/250VAC Resistive
Normally De-energized
Panel

Model
Over-voltage
Undervoltage
Trip Time
Reset Time
Power Supply

Voltage
Frequency

Reset
Mounting

Typical Wiring

OVR
UVR
O-TIME
R-TIME
24
220

Setting Range
100 ~ 160VDC
60 ~ 110VDC
0.5 ~ 25sec
0.5 ~ 25sec
24VAC/DC
85 ~ 250VAC/DC
50/60Hz
Manual / Electrical / Auto Reset
35mm DIN-Rail / Panel

ELR

Earth Leakage Relay

EFR2.5

Ground(Earth) Fault Relay

Features
MCU Based Compact Design
Ground (Earth) Fault Protection for
Motor and Power Distribution Systems
Zero Phase Current Detection Method
Test Button Provides a Manual Self-testing Function
Independently Adjustable Ground (Earth) Current and
Trip (Operating) Delay Time
Built-in Power Indication LED and Trip Indication LED

Features
MCU Based Compact Design
Ground (Earth) Fault Protection for
Motor and Power Distribution Systems
Residual Current Distribution Method
Test Button Provides a Manual Self-testing Function
Independently Adjustable Ground (Earth) Current and
Trip (Operating) Delay Time
Built-in Power Indication LED and Trip Indication LED

Specification

Specification

Current Setting
Time Setting
Operating Characteristic
Current Sensing
Control Voltage
Frequency
Current Tolerance
Time Tolerance
Contact Rating
Rated Insulation Voltage
Expected Mechanical Life
Expected Electrical Life
Ambient Temperature
Ambient Humidity
Dielectric Strength

Electrostatic Discharge
EFT / Burst
Surge
Voltage Dip & Interruption
Mounting

Typical Wiring

0.03 ~ 3A
(0.03, 0.07, 0.1, 0.3, 0.5, 1, 1.5, 2, 2.5 and 3A Tap )
0.2 ~ 2.0sec
(0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8 and 2.0 sec Tap)
Definite Time
ZCT(CBCT) - Zero Phase Current Detection
240VAC 10%
50/60Hz
5%
5%
5A/250VAC Resistive
1-SPDT / Normally De-energized
600VAC, 50/60Hz
10,000,000 Operation
100,000 Operation
-20 ~ 60
10 ~ 85% without Condensation
Casing-Circuit
2kV, 50/60Hz, 1min
Contact-Contact
1kV, 50/60Hz, 1min
Circuit-Circuit
2kV, 50/60Hz, 1min
IEC61000-4-2 Level-3
IEC61000-4-4 Level-3
IEC61000-4-5 Level-3
IEC61000-4-11
Flush Mount (Panel Door Mount)

Current Setting
Time Setting
Operating Characteristic
Current Sensing
Control Voltage
Frequency
Current Tolerance
Time Tolerance
Contact Rating
Rated Insulation Voltage
Expected Mechanical Life
Expected Electrical Life
Ambient Temperature
Ambient Humidity
Dielectric Strength

Electrostatic Discharge
EFT / Burst
Surge
Voltage Dip & Interruption
Mounting

0.1 ~ 2.5A
(0.1, 0.3, 0.5, 0.7, 1.0 , 1.3, 1.5, 1.7, 2.0 and 2.5A Tap)
0.2 ~ 2.0sec
(0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8 and 2.0 sec Tap)
Definite Time
Residual Current Detection
240VAC 10%
50/60Hz
5%
5%
5A/250VAC Resistive
1-SPDT / Normally De-energized
600VAC, 50/60Hz
10,000,000 Operation
100,000 Operation
-20 ~ 60
10 ~ 85% without Condensation
Casing-Circuit
2kV, 50/60Hz, 1min
Contact-Contact
1kV, 50/60Hz, 1min
Circuit-Circuit
2kV, 50/60Hz, 1min
IEC61000-4-2 Level-3
IEC61000-4-4 Level-3
IEC61000-4-5 Level-3
IEC61000-4-11
Flush Mount (Panel Door Mount)

Typical Wiring

27

EGR

Electronic Ground Fault Relay

PMR

Electronic Phase Monitoring Relay

Features
MCU Based Compact Design
Ground Fault Protection with ZCT
Trip & Run Indication LED
Manual / Electrical Reset

Features
MCU Based Compact Design
Multiple Protection Functions
2 - 15% Voltage Unbalance Setting
Trip Cause Indication & Troubleshooting
Manual / Electrical / Automatic Reset
Ambient Insensitive
Fail-safe Operation

Protection

Protection

Protective Item
Ground Fault

Trip Time
O-Time

Specification
Ground Fault (GF)
Current Setting

Trip Time Setting

Reset
Power Suppy
Contact Rating
Mounting

Trip Time
0.1 sec
1 sec
5 sec

Protective Item
Phase Reversal
Phase Loss
Voltage Unbalance

Specification
Type
05
10
20
O-TIME

Mode/Rating
Status

Range
50 - 500mA
100 - 1,000mA
200 - 2,500mA
0.2 - 2.0 sec
Manual / Electrical
(Push RESET Button or Interrupt Supply Power)
110 / 220VAC, 50/60Hz
1-SPDT(1C), 3A/250VAC Resistive
Normally De-energized
35mm DIN-Rail / Panel

Control Voltage

Type
220
440

Reset

Contact Rating

Mode
Rating
Status

Mounting

Troubleshooting
LED Signal (Pulse Chart)

Condition
Normal Run
Voltage Unbalancing
Voltage Unbalance
R
Phase
Trip
S
Loss
T
Phase Reversal

Typical Wiring

28

Range
3 160 - 300VAC, 50/60Hz
3 340 - 480VAC, 50/60Hz
Manual (Instantaneous) / Electrical
Automatically reset with 5 sec delay
when supply power comes to normal.
1 - SPDT (1C)
5A/250VAC Resistive
Normally Energized
35mm DIN-rail/Rail

Typical Wiring

Green LED
On
On
Off
Off
Off
Off

Red LED
Off
On
On
Flickering
Flickering
Flickering
Flickering alternatively

2CT

Current Transformer

Features
Fitted to EOCR relays for Large Amp Motor Protection
1.0 Measuring Class
For EOCR Only

ZCT

Current Transformer

Features
Fitted to EOCR relays for Large Amp Motor Protection
1.0 Measuring Class
For EOCR Only
Specification

Specification
Model
Current Ratio
Class
Budden
Insulation Voltage
Dielectric Strength
Insulation
Mounting

3CT

2CT-100
100 : 5A
1.0
5VA

2CT-150
150 : 5A
1.0
5VA

2CT-300
2CT-200
200 : 5A
300 : 5A
1.0
1.0
5VA
5VA
600VAC
2kV
10M (500VDC Megger)
Panel

2CT-400
400 : 5A
1.0
5VA

Zero Phase Current Transformer

Model
Current Ratio
Class
Budden
Insulation Voltage
Dielectric Strength
Insulation
Mounting

3CT-100
100 : 5A
1.0
5VA

SR-CT

3CT-150
150 : 5A
1.0
5VA

3CT-300
3CT-200
200 : 5A
300 : 5A
1.0
1.0
5VA
5VA
600VAC
2kV
10M (500VDC Megger)
Panel

Current Transformer

Features
Applicable for Ground Fault Protection Devices (EGR)
Detect Zero Phase Current
For EOCR Only

Features
Fitted to EOCR relays for Large Amp Motor Protection
Satisfied with IEC Inverse Trip Characteristic
Protection Class
For EOCR Only

Specification

Specification

Hole Dimension

Primary GF Current
Secondary GF Current
Tolerance
Budden
Rated Voltage
Dielectric Strength
Insulation
Mounting

Type
ZCT - 35
ZCT - 80
ZCT - 120

Hole
35mm
80mm
120mm
200mA
1.5mA
10%
10VA
600VAC
2kV
10M (500VAC Megger)
Panel

Current Ratio

Tolerance (Protection Class)

Budden
Secondary Current
Insulation Voltage
Dielectric Strength
Insulation
Mounting

Type
SR-CT-100
SR-CT-150
SR-CT-200
SR-CT-300
SR-CT-400

3CT-400
400 : 5A
1.0
5VA

Current Ratio (SR-CT)

100 : 5A
150 : 5A
200 : 5A
300 : 5A
400 : 5A
3%(10P10 / IF=10)
1.25VA (5VA: Measuring Class)
5A
600VAC
3kV
10M (500VDC Megger)
35mm DIN-Rail / Panel

29

Dimension

EOCR-SS / AR / EUCR

EOCR-DS / DS1 / DS2 / DS3

EOCR-SS1 / SS2

EOCR-DST / DS1T / DS2T / DS3T

EOCR-SP / SP1 / SP2-01 / 10Type

PMR / EVR / EVR-PD

EOCR-SP / SP1 / SP2-20Type

EOCR-3DD(E) / 3DZ(E) / EUCR-3C / 3DM / 3MS / 3MZ

SDDR

EOCR-PMZ

30

DCL / DCUR / DOVR / DUVR

EVR-FD

ECOR-S,H / DVR / EGR

2CT

ELR / EFR2.5

3CT

SR-CT

EOCR-PFZ

31

Dimension

EOCR-FD(E) / FDZ(E) / FDM / FMS / FDZ

32

ZCT

MEMO

MEMO

MEMO

2007 Samwha EOCR Ltd.-All rights reserved.

Head Office

Iksan Plant
574, Yongie-dong, Iksan-shi, Junbuk, Korea
Tel. 82 63 835 5033 / Fax 82 63 835 4175

EOCR_EN

1588 -3473
[email protected]

6th floor, Cheil Bldg., 94-46, Youngdeungpo-Dong 7Ka, Youngdeungpo-Ku, Seoul, Korea
Tel. 82 2 3473 2340 / Fax 82 2 3473 1159

April 07