Scribd
Upload
202 views

How To Amosconnect

To download and install Amosconnect email software, follow a 19 step process: 1) download the zip file from the provided link; 2) check you have the necessary components like the software zip and serial cable; 3) connect your computer to your Inmarsat terminal; 4) double click the zip file and follow the installation prompts; 5) configure your Thrane & Thrane Mini-M terminal in the wizard; 6) complete the wizard and open the new welcome email; 7) make dial-up connections to the AmosConnect hub to register your account and activate your assigned email address.

Uploaded by

Vijaynarayanan Bakthavathsalam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
202 views

How To Amosconnect

To download and install Amosconnect email software, follow a 19 step process: 1) download the zip file from the provided link; 2) check you have the necessary components like the software zip and serial cable; 3) connect your computer to your Inmarsat terminal; 4) double click the zip file and follow the installation prompts; 5) configure your Thrane & Thrane Mini-M terminal in the wizard; 6) complete the wizard and open the new welcome email; 7) make dial-up connections to the AmosConnect hub to register your account and activate your assigned email address.

Uploaded by

Vijaynarayanan Bakthavathsalam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

How to download and Install Amosconnect Email System.

How to download.
Step 1. Please go to the link ftp://ftp.amosconnect.com/amosconnect/amosconnect-current/
from your web browser.
Step2. From there select AC-7.4.17.zip file right click on it click on copy at the desktop
of your computer paste it.
Pre Installation Check list.
Check everything first, but please dont install the software until you are ready to go.
You should have the following ::
1.. A copy of the AmosConnect software
2. A 9 pin serial cable to connect between computer and Thrane & Thrane Mini-M
terminal (if no other email system is already installed).
Thrane & Thrane mini-m
In order to connect a Thrane & Thrane mini-m with your computer you have two choices:
Connect the serial cable (pin to pin connection) between the computer and the serial
port on the cradle:

Alternatively, the second option is to connect the serial cable (pin to pin connection) to
the serial port on the switch
Box

Once you have confirmed that your computer is physically connected to the
Inmarsat terminal i.e Thrane & Thrane Mini-M and that the data service has been
activated with Xantic, you can continue with installing the AmosConnect software.

1. Double click on the file AC-7.4.17.zip on your desktop. N.B make sure winzip installed on
your PC.- click on next click next click on next click on install now .

2. The installation will now start

Click on Next

3. Accept the terms of the license agreement

Click on Next

4. Click on the Complete option then


click on Next

5. Click on Install

6. The installation will now begin and copy the files to your computer.
Click on Finish when it completes.

7. The Configuration Wizard will now automatically start


Click on the option to Create a new Post Office
Then click on Next

8. Select I dont have a license key


then click on Next

9. You should insert the details given most are optional, but you must enter
the details for Your position and Ship name
Click on Next

Please give your ship Inmarsat terminal ID i.e your inmarsat data number.
10. Based on the previous details, you are now presented with a number of
suggested email addresses. Select the one you prefer.
Click on Next

11.

12. As you do not have a full license, only the default license details will be
used. Click on OK

13. You now need to configure the dialing devices to communicate with the
AmosConnect hub.

click on Add

14 The installation continues. Select the Use AM device and select your Thrane &
Thrane Mini-M TT from the list. Select Device as the communications port on the rear of
your computer that is connected to the Inmarsat terminal normally COM1
Then click on OK

15. Type the name of your Inmarsat terminal in the Description field.
Click on OK

16. The modem device should now be listed below figure. Click on Next

17. You will now be prompted that the configuration has been completed.
Click on Finish to complete the wizard.

18. You will now receive a notification of arrival of a new mail.


Click on OK

19. The AmosConnect program will now start

Double click on the new email to open and read it it will explain the
registration process.
You may print this out and refer to it, or else continue as below
You will now need to make several calls into the AmosConnect hub to activate your
account. You will do this via either Dial Up.
To make a Dial-up connection
To make a Dial-up connection click on the Next button

You will now see a screen that offers various dial up options

Click on the Dial button

This dialog contains four list boxes which you should check are correct:
Device should show your satellite terminal/modem
Remote PO shows AmosConnect Hub
Phone shows AmosConnect access code 65
Dial using shows Inmarsat terminal
If your terminal requires a character sequence in front of the phone number,
then click on the right side button

Enter that sequence in the Location Prefix field as T


Then click on Apply, then Close

Now if all the settings are correct, press the Connect button. after the connection has
been initialized you will then connect to the AmosConnect hub.
After about 30 seconds you will see the number at the top of your screen
change from ANON1 to a number beginning A0####

This means that you have successfully registered you account and we are
checking that the email address you requested is available.
This should take about 5 minutes.
After 5 minutes, make a second connection in the same way as above.
You will then receive an email which contains the email address you have
been assigned.
Your account has now been activated which allows you to send and receive
email to or from the any internet user up to a maximum size of 1Mb per
email.

You might also like