P-6177

3000 HP x 1,500,000 lbs. HOOK LOAD

HEAVY DUTY DRILLING RIG

BHL INTERNATIONAL, INC.

5201 Hopper Rd.

Houston, Texas 77093
Phone: (281) 449-5762 * Fax: (281) 449-9009
www.bhlinternational.com

BHL INTERNATIONAL, INC.

5201 Hopper Rd.
Houston, Texas 77093
Tel. 281-449-5762 * Fax: 281-449-9009
www.bhlinternational.com

BHL
MEMBERSHIPS/
CERTIFICATIONS

AMERICAN
PETROLEUM
INSTITUTE

INTERNATIONAL
ASSOCIATION
OF DRILLING
CONTRACTORS

ASSOCIATION OF
ENERGY SERVICE
COMPANIES

AMERICAN
WELDING SOCIETY

AMERICAN SOCIETY
OF MECHANICAL
ENGINEERS

Licensed, Certified, Registered Under API Spec 4F-0167,

API Spec Q1 -0580, ISO 9001-0829, ISO /TS 29001-TS-0401,
ASME BPVC 44,822; and NBBI R-9050

TECHNICAL PRESENTATION

BHL International, Inc. (BHL) is pleased to submit this proposal for a Heavy Duty
3000HP Land Drilling Rig. This Drilling Rig is unique in many ways.
The Rig is capable of drilling and moving from one well to the next wells, fully
assembled including 800,000 lbs. of setback. There is no need to disassemble
from well to well which takes a long time. There is no limit to the number of wells
that can be drilled without disassembly.
The Rig is suited for simultaneous drilling, production and/or workover operations
on a pad location. The Rig is wide open below the drill floor and will clear
wellheads extending above ground level. The Rig is able to skid longitudinally on
skid rails on each side of the cellar and wellheads.
The Brand New Mast, Substructure and Rig Skidding System are built and name
plate monogrammed in accordance with the latest API Specification 4F, 4 th Edition
effective August, 2013. All other structures built under other editions (1 st, 2nd, and
3rd Editions) are now obsolete. Structures built under API 4E which may be offered
by others were obsolete in 1985. The latest 4th Edition has more stringent
requirements for quality, stability, sliding, erection and wind loading combinations.
MUD PUMPS. The three (3) 1600 mud pumps provided are all brand new with new
fluid ends and new pulsation dampeners rated to 7500 psi (not 5000 psi).
THE DRAWWORKS is a newly refurbished 3000 HP, National 1625 Electric Driven
Unit with new 7838 auxiliary brake, and all new bearings and clutches.

THE NATIONAL
BOARD OF BOILER
AND PRESSURE
VESSEL INSPECTORS

THE SCR UNIT is brand new with all new wiring and electrical cable distribution
system for the entire rig. The SCR Unit is designed and engineered to provide the
maximum degree of operational efficiency based on the power requirements of the
rig.
THE (5) GENERATOR SETS are brand new Caterpillar 3512C, 1476 HP each
(7380 HP Total) are fuel efficient and environmentally emissions friendly.

Page 1

ALL INSTRUMENTATION EQUIPMENT including Pit Volume Totalizers are

brand new.
MUD PROCESSING EQUIPMENT are brand new.
AIR HOISTS & BOP HANDLING SYSTEM are brand new.
THE 10,000 PSI BOP TRANSPORT SKID enables the transportation of the
BOP Stack fully assembled without breaking apart, thus facilitating testing as a
complete assembled unit before drilling starts at well site.
The Drilling Rig is capable of drilling, completion, testing, temporary
abandonment and intervention work in connection with Land Drilling Rig
operations. The maximum well depth is 30,000 ft.
The Drilling Rig and its associated equipment where applicable, comply with
recognized industry standards and relevant specifications of the American
Petroleum Institute (API), American Institute of Steel Construction (AISC),
American Welding Society D1.1 (AWS D1.1), International Association of Drilling
Contractors (IADC), ASME Boiler and Pressure Vessel Code and The National
Board of Boiler & Pressure Vessel Inspectors.

The Drilling Rig is manufactured, rigged-up, tested, commissioned and packaged

at BHL International, Inc. (BHL), Houston, Texas U.S.A. BHL is licensed, certified
and registered under API Spec 4F-0167, API Spec Q1-0580, ASME BPVC
44,822; and NBBI R-9050. BHL is a member of the American Petroleum Institute
(API), International Associations of Drilling Contractors (IADC), Association of
Energy Service Companies (AESC) and American Welding Society (AWS). BHL
Personnel are members of the Society of Petroleum Engineers (SPE), the
American Association of Drilling Engineers (AADE), American Society of
Mechanical Engineers (ASME) and the American Society for Quality (ASQ).
BHL's personnel are extensively experienced on drilling rig structures and
equipment.
The rig components used are from established and reputable U.S.A. Oilfield
Equipment Suppliers including National Oilwell Varco, Forum AOI, Caterpillar,
SWACO, Ingersoll Rand, etc. No Chinese equipment are used in this Rig.
The Rig is near completion. Any other rig will take a very long time to construct
and deliver.

Page 2

RIG SPECIFICATIONS
MAST:
Height above Drill Floor:
API 4F Rated Static Hook Load:
Racking Capacity:
Base Width:
No. of Lines to T-Block:
Drill Line Size:

147 Ft.
1,500,000 lbs.
30,000 Ft. of 5 1/2" Drill
Pipe
31 Ft.
14 Lines
1 5/8"

Mast will have latest API Certification and API Monogrammed

nameplate. Mast is brand new.
SUBSTRUCTURE:
Drill Floor Height:
Casing Load (Rotary) Capacity:
Setback Load:
Combined Simultaneous Capacity;
Casing plus Setback:

34 Ft. (32 ft. w/o Rig Skid Rails)

1,500,000 lbs.
800,000 lbs.
2,300,000 lbs.

Substructure has the latest API Certification and API

Monogrammed nameplate. Substructure is brand new.
DRAWWORKS:

NATIONAL 1625 UE 3000 HP

ROTARY TABLE:

NATIONAL 37 "

PUMPS:

(3) 1600 HP American Block

SCR UNIT:

5 Gen x 5 SCR Bays

GENERATOR SETS:

(5) CATERPILLAR 3512C, 1476 HP ea.

TOP DRIVE:

750 Ton Electric Top Drive (Canrig)

BLOWOUT PREVENTORS:

13 5/8" x 5,000 PSI NOV (N)

13 5/8" x 10,000 PSI Hydril Double (R)
13 5/8" x 10,000 PSI. Hydril Single (R)
13 5/8" x 10,000 PSI Choke and Kill Spool

LIQUID CAPACITIES:
ACTIVE MUD:

1500 BBLS

RESERVE MUD:

1500 BBLS

DRILL WATER

1000 BBLS

FUEL:

31,000 Gal. at rig site

Please refer to detailed inventory.

Page 3

BHL Ref. No. P-6177

MAST AND SUBSTRUCTURE 147ft. x 1,500,000 lbs. HOOK LOAD

API 4F-0167 MONOGRAMMED AND CERTIFIED
DRAWWORKS AT DRILL FLOOR LEVEL, SELF-ELEVATED AND RAISED USING
DRAWWORKS POWER (NO HYDRAULIC CYLINDERS REQUIRED)

A.

MAST
Mast Assembly complete with 147 clear height,
1,500,000 lbs. static hook load capacity, strung on 14 lines
with 31 base, ladders, lighting and crown assembly.
The crown assembly is to be supplied complete with a main
cluster consisting of seven (7) sheaves, a fastline sheave
each grooved for 1 5/8" wireline and arranged to
accommodate a seven (7) sheave traveling block,
handrails, bumper blocks, padeyes for block suspension
line, tugger sheaves and top drive
The racking board is designed for a racking capacity of
30,000 of 5 1/2 drill pipe and ten (10) stands of 8 Drill
Collars. The racking board shall be complete with an
adjustable diving board, finger covers for the drillers side
fingers, 84 handrails, racking board frame and a ladder
landing platform with handrails.
Derrickman assist winch at racking board to facilitate drill
collars and drill pipe pull back.
Two (2) tong counterweights complete with buckets, guides,
blocks and wirelines are to be included. Padeyes are to be
mounted in the mast intermediate section.
Two (2) Tugger sheave units grooved for 9/16 diameter
wireline.
Escape line, 9/16 x 1.5 x mast height with padeye and
shackle.
The mast contains all the necessary drive pins
and bolts for assembly.
Mast stand.Mast is API 4F monogrammed and
certified to the latest 4th Edition.

Page 4

SELF-ELEVATING SUBSTRUCTURE
The Self-Elevating type Substructure is to be supplied
complete as per the following:
The substructure is rated for 1,500,000 lbs. casing load
simultaneous with a setback of 800,000 lbs. (2,300,000 lbs.
total capacity). The drill floor is 32' high from ground level,
34 ft. with rig skid rails or vertical extension.
The drawworks self-elevates to drill floor level using its own
power. The setback elevates to drill floor level operating
position using drawworks power.
The structure is to be supplied with checkered floor plate,
safety handrails with toe-boards.
BOP Trolley beams to extend to the front of the rig under
the V-door.
Features:
The Drill floor area is 40 x 40
Provision for independent rotary drive
Three (3) sets of stairs from working floor, two (2) to the
ground and one (1) to the trip tank landing complete with
handrails.
One (1) Mousehole to be included for Range II pipe.
One (1) Rathole to be included for Range II pipe.
BOP stabilizer padeyes.
V door ramp with stairs.
Mast shoes.
Substructure is API 4F monogrammed and certified to the
latest 4th Edition.

Page 5

BHL REF. NO. P-6177

RIG SKIDDING SYSTEM

BHL International, Inc. (BHL) is pleased to submit this proposal for a Drilling Rig
Skidding System.
The Client would like to use a land drilling rig for a project where existing
wellheads extend above ground level. The drilling rig must be able to
longitudinally skid on each side of the cellars and well heads. The substructure
will have to clear wellheads up to 12 ft.
BHL's mast and substructure design have a wide open area underneath the drill
floor with no problem clearing the wellheads as specified. The skidding rails do
not interfere with the existing wellheads.
Rig Skidding System: The rig skidding system is designed to take the full
operating capacities of the rig during all drilling operations including 1,500,000 lbs.
hook load or casing load simultaneous with 800,000 lbs. full setback and all
maximum combination wind loadings stipulated by API 4F. It shall be designed for
erection loads, overturning and sliding as prescribed by API 4F.
The rig skidding system is designed to skid the complete mast and substructure,
fully assembled, complete with the drawworks, rotary table, top drive, traveling
block, hook, all drill floor equipment and BOP stack. It shall be capable of
skidding with 600,000 lbs. of pipe setback.
The rig shall be secured to the skid rails while drilling.
The substructure will have adequate guides while skidding. The guides will be
capable of providing uplift stability in case of sudden wind gusts or other events
that may produce overturning while skidding.
The maximum allowable wind velocity while skidding is 35 MPH. Skidding shall
stop and substructure clamped to the skid base for higher wind condition.
The drilling rig will skid longitudinally, drawworks side to pipe rack side or vice
versa.
BHL SCOPE OF SUPPLY:
A.
One (1) Rig Skidding System as described in this proposal and the
drawings.
The Rig Skidding System is further described as follows:

Page 6

 The Skid Rail System requires 80 ft. of skid rails to set the
substructure and elevated pipe rack for drilling operation plus space to
set the hydraulic jacks and claw bases. The skid rails are 20 ft. long
each section to allow for convenient "leap frogging" required for
skidding. An extra 20 ft. leap frog section is provided to skid the rig
forward or back, making the total length required to be 100 ft.
Five (5) - 20 ft. leap frog sections on each of Driller's and Off-driller's
side or a total of ten (10) - 20 ft. sections are required.
All sections are connected with double 100,000 psi high strength pins
for fixity and continuity.
The top of the skid rails are slotted to anchor the jacking claw bases
while skidding.
GUIDE BASES
Guide Bases are included to guide and align the substructure base
on top of the skid rails. Each of the guide bases include a positive
restraint to prevent uplift and overturning of the structures in the event
of high wind and other events while skidding.
CLAMPS
Clamps are provided to clamp and lock down the structures on the
skid base when not skidding.
SKIDDING JACKS
Skidding jacks capable of skidding the rig are included in this
proposal. These jacks are push - pull types capable of pulling or
pushing the rig.
CLAW BASES
Claw Bases are provided to anchor the hydraulic jacks to the skid rail
while skidding.
CONTROL CONSOLE
A portable console with its own stand is included for the skidding
operation. 100 ft. long hoses are provided between the hydraulic
jacks and the console. The existing Rig Hydraulic unit will be used.
BHL RIG SKIDDING SYSTEM CAPABILITIES:
BHL personnel have designed extensive number of rig skidding systems for
land, offshore and arctic rigs including over 40 offshore platform rig skidding
systems. We worked on rig skidding for Union Platform Gilda (now Chevron
Texaco) which has 96 well slots, the most number of wells on a platform.

Page 7

BHL Ref. No. P-6177

3000 HP x 1,500,000 lbs. HOOK LOAD OILFIELD DRILLING RIG

DETAILED INVENTORY
CODE: (N) New

(R) Refurbished

MAST: (N)
Model:
147 BHL Self-Elevating Mast
Hook Capacity:
1,500,000 lbs.
Clear Height:
147 feet
Racking Capacity: 30,000 ft. of 5-1/2 (Triples)
Mast will accommodate a 750 Ton Top Drive
Mast is API 4F-0167 Monogrammed and Certified
Includes Caged Ladders
SUBSTRUCTURE: (N)
Model:
BHL Self-Elevating Substructure
Drill Floor Height: 34 ft.
Casing Capacity: 1,500,000 lbs.
Setback Capacity: 800,000 lbs.
Total Capacity:
2,300,000 lbs.
Substructure is API 4F-0167 Monogrammed and Certified
V-DOOR: (N)
CAT WALK: 1 Piece, 18 H x 5W (N)
PIPE RACKS: 6 Pipe rack beams, 3 on each side of Catwalk (N)
RIG SKIDDING SYSTEM: 5 Sections. No Limit to Number of Wells (N)
(NOT INCLUDED )
TOP DRIVE: 750 Ton Electric Top Drive, Canrig (N)
DRAWWORKS:
Model: National 1625, 3000 HP
Drive Motors: 3 1050 HP Continuous, 1250 HP Intermittent (R) with
w/ 10hp Blowers (N)
Auxiliary Brake Model 7838 (N)

Page 8

Brake Cooling: 50 bbl water tank, (N) w/ 4 x 3 x 13 centrifugal pump and

30 hp electric driver (N)
DRILL LINE: (N)
Make: Union Wire Rope (or Equal) , 5,000 ft.
Type: 1- RRL, EIPS, IWRC
DEADLINE ANCHOR: (N)
Make: Hercules, 120,000 lbs. capacity
Hook Load Capacity on 14 lines: 1,680,000 lbs.
DRILL LINE SPOOLER: (N)
Type: Electric Drive
Capacity: 5000 ft. of 1- Drill line
TRAVELING ASSEMBLY: (R)
Block: Model 750 Ton
Hook: Model 750 Ton
Elevator Links: 144, 750 Ton
ROTARY EQUIPMENT:
Swivel:
Model 750 Ton (R)
Kelly: Type Hexagonal (R)
Size 5-, 40 feet
Kelly Bushing; Pin Drive (R)
Kelly Hose Type: Grade D API 7K, 10,000 psi; 85 feet long (N)
Rotary Table: Type Model RT375 (R)
Size: 37 " Square
Rating: 750 tons
Drive: 1 GE752 /Joliet Traction Motor (R) w/10hp detached
blower (N)
Master Bushing: 37 (R)
Inserts bowl 1, 2, and 3 (R):
1-Dimension: 13-3/8 & 11-3/4
2-Dimension: 10-3/4 & 9-5/8
3-Dimension: API 8-5/8
MUD SYSTEM:
Mud Pumps: (3) American Block 1600 HP (N)
Type Triplex
PSI: 7500 psi
Drivers: 2 Joliet 1050 HP Traction Motors (R) w/10 hp blowers (N)
Pulsation Dampeners: 7500 psi (N)

Page 9

Charging Pumps 8 x 6 x 11 Centrifugal w/75 hp electric driver (N)

Active Tanks: 1500 BBL Total Capacity 3 Tanks (N)
Shaker Tank; 500 bbl, Equipped with Roof, (N) w/
3 Swaco Shale Shakers, (N)
2 Circulating Pumps: 6 x 5 x 11 w/60 hp electric drivers (N)
1 Drilco Degasser (N)
1 Desilter, 12-cone (N)
1 Desander, 3 cones (N)
2 Sand Traps (N)
4 Agitators (N)
Suction Tank; 500 bbl, equipped with a roof, (N) w/
2 Pumps, 6 x 5 x 11 w/60 hp electric drivers (N)
3 Mud agitators (N)
1 Hoppers, Low Pressure (N)
1 Hoppers, High Pressure (N)
Intermediate Tank: 500 bbl, equipped with a roof, (N)
2 Agitators (N)
Trip Tank: 75 bbl (N) w/
10 bbl strip tank
2 4 x 3 x 13 centrifugal pump with 30 hp electric driver
Reserve Tanks: 1500 BBL Total Capacity 3 Tanks (N)
1 - Reserve Mud Tank #1, 500 bbls, equipped with a roof
1 - Reserve Mud Tank #2, 500 bbls, equipped with a roof
1 - Reserve Mud Tank #3, 500 bbls, equipped with a roof
GENERATOR UNITS: (N)
Engines: 5 Caterpillar 3512C, 1476 HP ea. (N)
Generators: 5 Kato 6P6-3300 Synchronous Brushless Revolving
Field Generator rated at 1365 kw for SCR Application,
(N)
SCR HOUSE: (N)
5 Gen x 5 SCR system (N)
600 VAC, 750 VDC 3 phase
Input: 1,600 Amps, 60 hz
Output: 750 VDC, 2,000 AMP ADC
Climate controlled, self-contained unit.

Page 10

AUXILIARY EQUIPMENT & STORAGE

Air Compressor (N)
2 Curtis 40 Series, Screw Type, 173 CFM, 125 psi
Powered by 40 hp electric drivers
Air Receivers (N)
2 200 gallon vertical
1 600 gallon at substructure
Air Dryer (N)
Cold Start Compressor (N)
1 Lambardini 10 hp Diesel pull start, Model CAERSPKG, R-series
1 40 Gallon receiver attached, 25.25 ACFM @ 100 psi
Dog House (N)
1 8 feet x 35 feet drillers side mounted
Change & Equipment Storage House (N)
Fuel Tanks [Total 750 BBLs] (N)
3 250 bbl Tank (N) w/ manhole drip pan
2 RCI Fuel purifier, Dayton GPCV6V-05 pump with
2 hp, 3 ph electric pump motors (N) equipped with a drip pan
Water Tank (N) (1000 bbl total capacity)
1 500 bbl tank w/
2 4 x 3 x 13 centrifugal pumps driven by 30 hp electric motors
(See Dual Purpose Mud / Water Tank for the other 500 bbls)
INSTRUMENTATION, CONTROL & RECORDING EQUIPMENT (N)
Drilling Instrumentation: Drillers Console, AOI Custom, Single Bay w/ (N)
Model 100 Weight Indicator
Electric Torque Indicator
Rotary RPM indicator
Pump Pressure Gauge
Tong line pull indicator
ROP Indicator
Pump Stroke Counter
Automatic Driller
SCR Drive Control: Drillers Control Console (DCC) (N)
1 12-Position Selector Switch,
1 Drilling / Tripping
1 Drawworks speed selection
1 SCR/MP-1/MP-2, Drawworks/Rotary, T.A. Control unit
1 Hydraulic Tong Controls

Page 11

1 Emergency Stop (Power System)

Driller Video Monitoring (N)
1 - Fixed mounted, fixed zoom lens color camera mounted in the
racking board
1 Video color monitor designed and equipped to be mounted on
the rig floor
Analog Drilling Recorder- (N)
1 ARG series 7 pen recorder to record;
Hook Load
ROP
Rotary torque
Pump Pressure
Rotary RPM
Rig Deviation Tool, 0 8 degrees
The 7-pen recorder is being provided for the following reasons: If it
is required for each mud pump to be printed out MP strokes per
minute and SPM at the same time, 6 pens of eight will be required.
BHL will provide a selector switch on the 7-pen recorder that will
select any one mud pump at one time. Data for each MP stroke
counter and MP SPM will be collected, but only one can be printed
out at one time.
Advance Drilling Monitoring System (ADMS) includes the following:
*5-Individual Mud / Trip Level Indicators
*Total Fill Stroke Indicator
*Pit Volume Totalizer
*Loss / Gain
*Percent Return Flow Indicator
*Flow In Indicator
*Cumulative Flow In Indicator
*3-Individual Stroke Per Minute Indicators
*3-Individual Fill Stroke Indicators
*Total Strokes Indicator
*8-Pen Printer
*Event Tagging
*On Screen Messaging
*Audible and Visual Alarms
BOP PREVENTION & WELL CONTROL EQUIPMENT
1 Annular Type, 13 5/8 API, 5,000 psi, NOV (N)
1 Ram Type preventer, 13 5/8 10,000 psi, Hydril Double (R)
1 Ram Type preventer, 13 5/8 10,000 psi, Hydril Single (R)
1 Ram Set 9 5/8, 7 , 5 , 3-1/2, & 2-3/8 (N)
1 Shear Ram (N)

Page 12

1 Drill Spool, 10,000 psi with 4-1/16 Choke and 2-1/16Kill connections (N)
1 Set Riser and bell nipple (N)

Choke Line Valves (N)

Manufacturer: Cooper-Cameron
2 Handle gate valve 4-1/16, type flange
2 Hydraulic gate valve 4-1/16, type flange
Kill Line Valves: (N)
Manufacturer: Cooper-Cameron
2 - Handle gate valve 2-1/16, type flange
2 - Hydraulic gate valve 2-1/16, type flange
Accumulator Unit and Control (N)
1 Consolidated Pressure Control 5S-2160-25 Manifold 5036 (or
equal), triplex pump, 3,000 psi
24-bottle, 360-gal. reservoir w/ air pump & 25 hp driver
1 Remote Control BOP on Rig Floor
1 Remote control panel with 150 umbilical run
Choke Manifold (N)
1 10,000 psi with adjustable 2-1/16 API
1 Remote control panel on rig floor
Mud Gas Separator
1 BHL MGS 48" x 20' (N)
Hydraulic Cathead: (N)
2 Hydraulic Cylinders with independent controls on drillers
console
Hydraulic Power Unit: (N)
1 World Wide, 30 gpm, Hartmann PVX464-CKXXX-20FL pump w/
20hp model XWWE20-18-256TC, electric drive
Air Hoists: (N)
2 Ingersol Rand, Man Riding, for 5/8 line size
Tugger: (N)
1 Derrickman's Assist Tugger at Racking Board
Kelly Spinner, International, Air drive, reversible (N)

Page 13

Lift Assist Assembly, including Geronimo Seat and escape slide (N)
Dual Standpipe: (N)
5 Rated to 7,500 psi
Length: 75 (from drill floor)
Standpipe Manifold: (N)
Stand Pipe Manifold rated to 7,500 psi.
BOP Handling System: (N)
1 Set - 50 Ton Capacity BOP Rails and Ingersol Rand (or Equal)
Trolley and Hoist.
Headache Rack for Mast (N)
DRILL PIPE: (NOT INCLUDED)
DRILL FLOOR EQUIPMENT: (NOT INCLUDED)
ELECTRICAL DISTRIBUTION SYSTEM: (N)
System includes all new cables, wirings, fittings, junction boxes, lighting,
etc. for a complete drilling rig electrical distribution system in accordance
and compliance with API specifications including API 500 Area and
Hazardous Zone Classifications.
1-Rig Site Stand-By/Emergency Power System to power rig
emergency loads and rig offices during rig moves:
1-Stand-By / Emergency Diesel Engine to power rig lighting
1-Power Distribution Panel
RIG PROCESS PIPING SYSTEM: (N)
All new process piping system including high pressure and low pressure
mud systems, drill water, fuel, air, hydraulic, wash downs, drains and
other piping required for a complete rig process piping system.
All high-pressure piping unions will be of the 1502 Hammer Union type.
RIG STRUCTURES AND EQUIPMENT ASSEMBLY AND RIG-UP:
The rig shall be assembled as close to actual rig site assembly with all
interconnections including accumulator lines, choke manifold lines, brake
cooling system, flow lines from bell nipple to shale shaker. Equipment
shall be laid out as shown on the rig layout drawing.

Page 14

TESTING:
The rig system shall be tested at the rig-up yard.
witnessed by the Client and/or its representative.

Testing shall be

DISASSEMBLY AND LOAD OUT:

After testing and acceptance, the rig shall be disassembled and cleaned
up for shipment. Touch-up painting and minor repairs of damage spots
due to rig-up and handling shall be performed and then loaded out.
Crating is by others.
DOCUMENTATIONS, MANUALS, WARRANTIES, AND API CERTIFICATIONS:
BHL shall provide (3) sets of hard copies of Operations and Maintenance
Manuals, Drawing Arrangements and Assemblies of the rig components,
Erection Procedures, Warranties, and Certifications. Three (3) sets of
electronic files will also be provided.
ENGINEERING
PROJECT MANAGEMENT
RIG SITE ACCOMMODATIONS: (NOT INCLUDED)
FORKLIFTS: (R) (NOT INCLUDED)
CRANES: (R) (NOT INCLUDED)
MANLIFT: (R) (NOT INCLUDED)

END OF INVENTORY

Page 15

PICTURE OF A SIMILAR RIG WITH THE SAME

DIMENSIONS AND CAPACITY PREVIOUSLY SOLD
TO ANOTHER CLIENT

1,500,000 lbs. HOOK LOAD MAST AND SUBSTRUCTURE

ASSEMBLED AT BHL'S YARD AS PROPOSED TO THE CLIENT

1,500,000 lbs. HOOK LOAD MAST AND SUBSTRUCTURE

ASSEMBLED AT BHL'S YARD AS PROPOSED TO THE CLIENT