Scribd
Upload
200 views

TDS AI Understanding A Coolant Analysis Report

Tecnico

Uploaded by

juanmanuel_4615958
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
200 views

TDS AI Understanding A Coolant Analysis Report

Tecnico

Uploaded by

juanmanuel_4615958
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Understanding A Coolant Analysis Report

Coolant analysis can identify the onset of maintenance deficiencies or mechanical issues that can lead to potential cooling system failure.
Corrosion, cavitation, localized overheating, electrolysis and lack of coolant maintenance are just a few of the many destructive conditions
that can cause major systems damage.
The Analysts Coolant Analysis Report is easy to read and offers detailed conclusions and maintenance recommendations that will enable
you to reduce major repairs and increase equipment uptime, productivity and safety.

Unit ID, Manufacturer, Model and


Coolant Type are extremely important
to a data analyst in determining if the
coolant meets engine and coolant OEM
specifications and in providing accurate
maintenance recommendations.

Referencing the Lab Number will


expedite resolving any question when
contacting the lab concerning a sample.

Data analysts provide you with


Maintenance Recommendations
based on in-depth analysis, taking
the guesswork out of interpreting
coolant analysis results.

Corrosion occurs when


buffers are no longer able to
counter acid formation due to
thermal degradation.
Typical Corrosion
Product Sources:
Ironliner, water pump,
cylinder block/head
Aluminumradiator tanks,
coolant elbows, piping,
spacer plates, thermostat
housings
Copperradiator, oil cooler,
aftercooler, heater core
Leadradiator solder, oil
cooler, aftercooler, heater
core

Silicon, Boron, Molybdenum and Phosphorous are inhibitors present


in coolants for metal protection and pH control. Inhibitors present are
dependent upon the coolant formulation.

Adequate glycol levels must be


maintained to ensure proper
Freeze and Boil Point protection.
High glycol can cause additive
dropout and decrease coolant life.
A glycol range of 45% to 60% is
recommended.

Complete and accurate


Sample Information
number of hours on both
unit and coolants and
filter and fluid change
information is critical
for a data analyst to make
a proper maintenance
recommendation.

Nitrite is present in heavy duty, fully formulated


conventional coolants, nitrite OAT and hybrid coolant
formulations. Some are a combination of nitrite and
molybdenum. The maximum acceptable level of nitrite
or nitrite and molybdenum combined is 3200 ppm
(parts per million). Excessive nitrite levels can lead to
solder corrosion.

CA_TDS AI_2014

Calcium and Magnesium Contaminants present


in an engine coolant will form scale on hot metal
surfaces. Scale is an efficient insulator and can
cause localized engine overheating which can result
in component failure. OEM and ASTM specifications
are set on Total Hardness levels as CaCO3.

An adequate pH
range should remain
between 8.0 11.0 for
conventional coolants
and 7.0 9.5 for ELCs.
Proper pH levels are
necessary for optimum
corrosion inhibitor
performance.

Reserve Alkalinity indicates a coolants capacity to


neutralize acids formed in (glycol oxidation products) or
entering (exhaust gas blow-by) the cooling system. The
rate at which reserve alkalinity decreases, along with the
amount of inhibitor added, will help predict when the
coolant will become too acidic to protect the cooling
system from corrosion.

Copyright 2014 Analysts, Inc.

You might also like