Scribd
Upload
156 views

13.701 Embedded Systems (E)

This document outlines a course on embedded systems. It introduces embedded systems concepts and the 8051 microcontroller. It describes the course objectives, modules, evaluation process, and expected outcomes which include explaining embedded system characteristics, interpreting trends, identifying design steps, and writing programs for the 8051 microcontroller and interfacing with devices.

Uploaded by

SHIJUKUMAR
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
156 views

13.701 Embedded Systems (E)

This document outlines a course on embedded systems. It introduces embedded systems concepts and the 8051 microcontroller. It describes the course objectives, modules, evaluation process, and expected outcomes which include explaining embedded system characteristics, interpreting trends, identifying design steps, and writing programs for the 8051 microcontroller and interfacing with devices.

Uploaded by

SHIJUKUMAR
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

13.

701 EMBEDDED SYSTEMS (E)


Teaching Scheme: 2(L) - 1(T) 0(P)

Credits: 3

Course Objectives

Introduce the concept of embedded system.


Identify the unique characteristics of real time systems.
Define the unique design problems and challenges of real time systems.
Design, implement and test an embedded system
Assembly, C language programming and interfacing of peripherals
Module I

Introduction to Embedded Systems- An embedded system, features, current trends and


challenges, Product life cycles, Processors, Tool chain, Hardware Design Issues, System
memory Layouts, Real time Systems, Hard and Soft.
Programming concepts- Review of C-Programming, Data Structures, Software Life Cycle
Models, Embedded Systems Design, Implementtion and Testing, Project Management.
Embedded System Progrmming Embedded system Design issues, challenges and trends
in Embedded Systems. Assemblers, Compilers, linkers, loaders, debuggers, profilers & Test
Coverage tools.
Module II
Microcontroller basics, Terminology & Principles- 8051 microcontroller architecture: function
and description of 8051 components to include Special Function Registers(SFRs), Pin out of
8051 microcontroller, Memory mapping, Stack operation, Instructions and Addressing modes,
Basic programs(Binary & BCD Arithmetic).
Module III
Timers of 8051 Operating modes, Assembly language & Embedded C programs.
Counters of 8051 Operating modes, Assembly language & Embedded C programs.
Serial Communication Assembly language & Embedded C programs, Baud rate doubling.
Module IV
Interrupts of 8051(Theory). Interfacing and programming of 8051 with DAC, ADC, Stepper
motor, LCD, 7-segment LED display & Keyboard. Interfacing of 8051 with 8255. An application
based on 8051 micro controller.
REFERENCES
1. Mazidi,The 8051 Microcontrollers & Embedded Systems,Pearson Education Asia
2. Raj Kamal,Embedded Systems, Tata Mc Graw Hill,2003
3. Ayala K.J ,The 8051 Microcontroller:architecture,programming and applications,
Prentice Hall,1993

4. Stewart J.W, The 8051Microcontroller: hardware,software and interfacing. Prentice


Hall,1993
5. Shultz T.W ; C and 8051:programming for multitasking, Prentice Hall,1993
6. Shibu K V,ntroduction to embedded systems,Mc Graw Hill education,2009
7. Yeralan S,Ahluwalia A,Programming and interfacing 8051 Microcontroller,AddisonWessley,1995

Internal Continuous Assessment (Maximum Marks-50)


50% - Tests (minimum 2)
30% - Assignments (minimum 2) such as home work, problem solving, termproject, software exercises, etc.
20% - Regularity in the class
University Examination Pattern:
Examination duration: 3 hours
Maximum Total Marks: 100
The question paper shall consist of 2 parts.
Part A (20 marks) - Ten Short answer questions of 2 marks each. All questions are
compulsory. There should be at least two questions from each module and not
more than three questions from any module.

Part B (80 Marks) - Candidates have to answer one full question out of the two from
each module. Each question carries 20 marks.

Course Outcomes
Upon successful completion of this course, students will be able to:

Explain the characteristics of an embedded system and describe the different


software tools used in the design

Interpret the current trends and challenges in the field of embedded systems

Identify the different steps involved in designing an embedded system and point
out the issues related to each step.

Write Arithmetical, logical, timer/counter, serial programs of 8051 in assembly


and C

Summarize the logic and programming of real world objects like LCD, Keyboard,
Stepper motor, ADC/DAC in Assembly and C

You might also like