Scribd
Upload
330 views

Notebook Combo-Debug-Card (VIP Version) User Guide

POSTCARD-MINI

Uploaded by

anacer55
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
330 views

Notebook Combo-Debug-Card (VIP Version) User Guide

POSTCARD-MINI

Uploaded by

anacer55
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Mini PCI / Mini PCI-E / LPC Combo-Debug-Card VIP version

Notebook Combo-Debug-Card (VIP Version) User Guide


This notebook Combo-Debug-Card uses 4-layers PCB design to provide a
very stable signal quality. Also, it uses Tantalum capacitance to provide good
power supply. So this VIP version Debug card is more suitable to be used in
poor environment. This VIP version is the upgraded version of the
Combo-Debug-Card, and it supports three bus interfaces: MINI PCI, Mini
PCI-E and LPC. This product is easy to use, and is designed with good stability.
It is your ideal tool for notebook repair.

1. Combo-Debug-Card structure and usage


2. The Mini-PCI interface in the Combo-Debug-Card
3. The Mini PCI-E interface in the Combo-Debug-Card
4. The LPC interface in the Combo-Debug-Card
5. The LED-Display in the Combo-Debug-Card
6. Part of Error-Code explanation
7. Q/A

Copyright: You are not allowed to copy/duplicate/sell this product without authorization

1. Combo-Debug-Card structure and usage


Mini-PCI interface:
This is used to connect this Combo Debug
Card to notebooks Mini-PCI slot.
Mini-PCIe interface:
This is used to connect this Combo Debug
Card to notebooks Mini-PCIe slot.
LPC interface:
This is used to connect this Combo Debug
Card to notebooks LPC connector.
ASIC:
Two 7-segment LEDs:
This is used to display the Error-code
Test port:
This port is reserved, and end-user should not
use this port.
Indicator:
This is for showing the status of CLK and RST
signal

www.etootle.com

Mini PCI / Mini PCI-E / LPC Combo-Debug-Card VIP version

2. The Mini-PCI interface in the Combo-Debug-Card


Mini PCI is a general interface, which is used in notebook. It includes 124 pins. This
Combo-Debug-Card doesnt fully use those pins, and only 101 pins are used. When
installing this Combo-Debug-Card to your notebook main-board, you will find the
Combo-Debug-Card is shorter than the notebook Mini-PCI slot. This is correct, and it
servers better for you to plug or unplug this Combo-Debug-Card.

3. The Mini-PCIe interface in the Combo-Debug-Card


Mini-PCIe is used as a trend in the new notebooks. Comparing to Mini-PCI, Mini-PCIe
occupies less space. This Combo-Debug-Card doesnt use all of the Mini-PCIe bus pins.
And only the below pins are used: PIN-8, PIN-10, PIN-12, PIN-14, PIN-16, PIN-17, and
PIN-19. In the Mini-PCIe spec, those pins are reserved, and it is not standard, so some of
Notebook manufacturers define it as a LPC debug-port. And more and more notebook
manufacturers are using this standard, such as IBM, Toshiba, HP, ASUS, TCL and etc
This Combo-Debug-Card can only work in the notebooks, which are with the LPC
debug-port definition. For the notebooks, which dont support this LPC debug-port
definition, this Combo-debug-card PCI-E interface will not work.
Note: Please be aware that Mini-PCIe is supported with limitation, and it can works in
most of notebooks, but not all.

4. The LPC interface in the Combo-Debug-Card


For the user, whose notebooks dont support the Mini-PCI interface and the
Mini-PCIe interface, you can use the third port: LPC interface. LPC interface exists in all
notebook main-boards. In the Combo-Debug-Card, from left to right, the LPC definition is:
PIN1-LFRAME#, PIN2-LAD3,
PIN3-LAD2
PIN4-LAD1
PIN5-LAD0,
PIN6-GND
PIN7-LRESET#
PIN8-LCLK
PIN9-3.3V
Usually, the notebook boards havent LPC connectors or slots. And the users will need to
connect this LPC port to the notebook by using wires. Below is some description for how
to connect the Combo-Debug-Card to your notebook through this LPC interface.
If your notebooks use LPC VBIOS, you can
connect the Combo-Debug-Card to your
notebooks VBIOS bus.
>> LPC VBIOS Pin definition:
PIN2-RST#
PIN13-LAD0
PIN14-LAD1
PIN15-LAD2
PIN16-GND
PIN17-LAD3
PIN23-LFRAME#
PIN25-VCC
PIN31-CLK

www.etootle.com

Mini PCI / Mini PCI-E / LPC Combo-Debug-Card VIP version

You can connect this Combo-Debug-Card to any LPC bus. Some LPC interface chips
are listed as below. You can connect the Combo-Debug-Card to the corresponding
pins. For more information, please refer those chips datasheets.

Note: This Combo-Debug-Card uses 3.3V as power supply, and you can use any 3V3 and GND
signals in your notebook main-board. Please be aware that connecting the Combo-Debug-Card to a
non-3.3V power may damage this Combo-Debug-Card.

For IBM X 60 notebooks, the LPC interfaces are located in the U39 slot of the
main-board. The Pin definitions are as below:
A2->LRESET#
A3->LFRAME#
A5->LCLK
A9->LAD3
A10->LAD2
A11->LAD1
A12->LAD0
For IBM T6 R6 notebooks, the LPC interfaces are located in the J26 slot of the
main-board. The Pin definitions are as below:
A1->LCLK,
A3->LFRAME#
B2->LRESET#
B7->LAD3
A7->LAD2
B6->LAD1
A6->LAD0

5. The LED-Display in the Combo-Debug-Card


The Display includes Error-Code display, Bus-Type display, and CLK,RST signal
status display.
1) Error-Code display: It is composed with two 7-segment LEDs.
2) Bus-Type display: The two Dots of the LEDs are used to indicate the notebook
bus type. The left side Dot is for Mini-PCI, and the right side Dot is for
Mini-PCIe and LPC bus. When the notebook works in Mini-PCI bus, the left side
Dot will be lighted. And when the notebook works in Mini-PCIe or LPC bus, the
right side Dot will be lighted.
3) CLK,RST signal status display: When you hold on the notebooks RESET
button, the RST indicator will be lighted, and the CLK indicator will be off.
When you release the notebook RESET button, the RST indicator will be off,
and the CLK indicator will be twinkled.

www.etootle.com

Mini PCI / Mini PCI-E / LPC Combo-Debug-Card VIP version

6. Part of Error-Code explanation


When the notebooks are running, this Combo-Debug-Card will show the
corresponding debug code. If there is a problem in the notebook, you can judge the
problem by the debug code. Below is the explanation for some main error codes.
AWARD BIOS:
The explanation when the Combo-Debug-Card shows the below debug codes.
Code

Explanation

C0

Close cache

01

Processor test

07

CMOS test

C1

Memory size test

0A

Set the interrupt table

0C

Initiate the keyboard

0D

Initiate the Graphic card

1A

Show CPU frequency

3C

CMOS setting

42

Initiate hardware

52

Test the extended ROM

FF

Boot

Note

AMI BIOS:
The explanation when the Combo-Debug-Card shows the below debug codes.
Code

Explanation

00

Error in self test

01

Error in processor test

0D, 0F

Error in CMOS test

1A 22

Error in Memory test

3A

Error in graphic card

FF

Pass the self test

Note

7. Q/A
Question: RST indicator is off, but CLK indicator is NOT twinkled.
Answer: This symptom shows there is no CLK signal for debug card so that the CLK
indicator isnt twinkled. Usually, it may mean the motherboard can NOT support this
Mini-PCIe interface. Please use Mini-PCI or LPC interface to test it.
Question: RST indicator is off, and CLK indicator is twinkled. But it shows 00
Answer: In this case, please check the Bus-Type display to check if the Bus-Type
display is corresponding to the bus type.

www.etootle.com

You might also like