100% found this document useful (1 vote)
545 views1 page

Storage Tank Foundation Settlement Quality Control and Inspection Report Form

This field inspection report form is used to record settlement readings for an oil storage tank foundation at various fill levels during a hydrostatic test. The form includes fields for inspection details like type, location, dates, and names of those performing and witnessing the inspection. Settlement will be measured at 8 points around the foundation perimeter at empty, 25% full, 50% full and 100% full tank levels to check if any exceed the acceptable criteria.

Uploaded by

Khepa Baba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
545 views1 page

Storage Tank Foundation Settlement Quality Control and Inspection Report Form

This field inspection report form is used to record settlement readings for an oil storage tank foundation at various fill levels during a hydrostatic test. The form includes fields for inspection details like type, location, dates, and names of those performing and witnessing the inspection. Settlement will be measured at 8 points around the foundation perimeter at empty, 25% full, 50% full and 100% full tank levels to check if any exceed the acceptable criteria.

Uploaded by

Khepa Baba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

www.Inspection-for-Industry.

com
ITP No.:
Inspection Gr.
Report No.
Date
WORK No.
ITEM No.
LOCATION

FIELD INSPECTION REPORT


Quality Control Form
INSPECTION TYPE

TANK FOUNDATION SETTLEMENT

SIGNATURE
INSPECTION NOTICE NO.:
COMPANYS INSPECTOR:
CONTRACTOR INSPECTOR:
SUBCONTRACTOR INSPECTOR

COMPANY
/
/

A
(mm)

CONTRACTOR
/
/

SUBCONTRACTOR

Reading at each point shall be taken at (1)- EMPTY, (2)-25% Full, (3)- 50% Full and (4)- 100% Full during Hydrostatic Test.

[Explanatory Figure]

Legend ACC:ACCEPT

NA.: Not Applicable REJ: REJECT

You might also like