Scribd
Upload
56 views

Floor Fastener

The document describes a Floorfast product that secures chequer plate flooring to supporting steelwork. It consists of a malleable iron body with a countersunk socket screw. It provides full face contact when torque is applied and has Lloyd's Register vibration resistance approval. The document provides product codes, specifications, installation instructions and a removal process.

Uploaded by

Andrew Black
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views

Floor Fastener

The document describes a Floorfast product that secures chequer plate flooring to supporting steelwork. It consists of a malleable iron body with a countersunk socket screw. It provides full face contact when torque is applied and has Lloyd's Register vibration resistance approval. The document provides product codes, specifications, installation instructions and a removal process.

Uploaded by

Andrew Black
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Type FF - Floorfast

Floor Fixings

Type FF - Floorfast

Malleable iron, bright zinc plated / hot dip galvanised


Stainless Steel Grade 316

Unique stepped
clamping face

Countersunk
socket
setscrew
90
D
t1

20

d
A - Nominal Clearance

Z
60
An innovative fixing for securing chequer plate flooring
to supporting steelwork. The product consists of a
malleable iron body casting with a countersunk socket
screw. The eccentric stepped web of the casting allows
it to lock under the steel, providing full face contact when
torque is applied. For thicker flanges a ferrule can be
supplied. Lloyds Register Type Approval for vibration
resistance.

Flange Width

13

Ferrule

Position of hole centres:


flange width - A + 13mm
Countersunk

Product
Code

Bolt

1)

Floorplate
Thickness

Flange Thickness
Standard

With Ferrule

t
mm

mm

10
mm

FF08

M8

4.5 - 12

3 - 15

FF10

M10

5 - 12

3 - 15

FF12

M12

6 - 12

3 - 15

Hole

Countersunk
for Bolt
BZP

2)

d
mm

HDG

Countersunk
Depth for Bolt
BZP

D
mm

Tightening
Torque

Hexagon
Key

Nm

mm

HDG

20
mm

30
mm

t1
mm

13 - 25

23 - 35

33 - 45

17

11

13 - 25

23 - 35

33 - 45

11

21

19

22

13 -25

23 - 35

33 -45

13.5

25

23

5.8

4.8

22

1) Hot dip galvanised M10 and M12 versions are supplied with a slotted countersunk screw.
2) To order Floorfast with a ferrule, simply add ferrule size to product code (see order example below).

Order example: FF12-10 HDG


Installation
1.

2.

1. Hot-dip galvanised M10 and M12 versions


are supplied with a slotted countersunk screw.
2. Align castings with straight edge parallel
to the edge of the plate and hand tighten.
3. Lay floorplate into position
4. Using a hexagon key release the countersunk
screw one full turn.
5. Tighten down the countersunk socket screw.

3.

4.

5.

Removal: Using a hexagon key, give the Type FF one full anticlockwise turn to release
connection from the flange.

Tel: +44 (0) 1274 521444 Lindapter International 2013 www.lindapter.com

69

You might also like