Scribd
Upload
321 views2 pages

Assignment On SFD BMD

This document contains 7 questions asking to draw shear force and bending moment diagrams for various cantilever and simply supported beams carrying different load configurations, including point loads, uniformly distributed loads over partial lengths, and uniformly distributed loads over entire lengths. The questions provide figures illustrating the beam and load setup for questions requiring visual reference.

Uploaded by

Vaibhaw Hirawat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
321 views2 pages

Assignment On SFD BMD

This document contains 7 questions asking to draw shear force and bending moment diagrams for various cantilever and simply supported beams carrying different load configurations, including point loads, uniformly distributed loads over partial lengths, and uniformly distributed loads over entire lengths. The questions provide figures illustrating the beam and load setup for questions requiring visual reference.

Uploaded by

Vaibhaw Hirawat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Q1. A cantilever beam of length 2 m carries the point loads as shown in Figure 1.

Draw the shear


Force and Bending Moment Diagrams for the cantilever beam

Figure 1
Q2. A cantilever beam of length 2 m carries a uniformly distributed load 1KN/m run over the
length of 1.5 m from the free end. Draw the shear Force and Bending Moment Diagrams for the
cantilever beam.
Q3. A cantilever beam of length 1.5 m carries a uniformly distributed load 1KN/m run over the
length of 1.25 m from the free end. It also carries a point load of 3 KN at a distance of 0.25 from
the free end. Draw the shear Force and Bending Moment Diagrams for the cantilever beam.
Q4. Draw the Shear Force and Bending Moments Diagrams of the simply supported beam of
length 7 m. carrying uniformly distributed loads as shown in Figure 2.

Figure 2
Q5. . Draw the Shear Force and Bending Moments Diagrams for the overhanging beam carrying
uniformly distributed load of 2KN/m over the entire length as shown in Figure 3.

Figure 3

Q6.

Q7.

You might also like