Scribd
Upload
373 views

How To Root and Install Custom Recovery

This document provides step-by-step instructions for rooting and installing a custom recovery on the Myphone My36 smartphone. It begins with downloading the necessary files, including ADB drivers, Tinno Driver, and a custom recovery file for the Wiko Fever, which is compatible with the Myphone My36. It then details unlocking the bootloader, flashing the custom recovery using fastboot commands, and finally flashing SuperSU to root the device. The process voids the device warranty and the author takes no responsibility for bricked devices.

Uploaded by

g_rualo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
373 views

How To Root and Install Custom Recovery

This document provides step-by-step instructions for rooting and installing a custom recovery on the Myphone My36 smartphone. It begins with downloading the necessary files, including ADB drivers, Tinno Driver, and a custom recovery file for the Wiko Fever, which is compatible with the Myphone My36. It then details unlocking the bootloader, flashing the custom recovery using fastboot commands, and finally flashing SuperSU to root the device. The process voids the device warranty and the author takes no responsibility for bricked devices.

Uploaded by

g_rualo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

HOW TO ROOT AND INSTALL

CUSTOM RECOVERY
YUKITO YAMAMOTOFRIDAY, DECEMBER 18, 2015

DISCLAIMER:

I am not be held liable if you bricked


your device. TRY IT AT YOUR OWN
RISK!
NOTE 1. BEFORE STARTING THE PROCESS, MAKE SURE THE
SUPERSU FILE IS ALREADY PLACED IN YOUR EXTERNAL
MEMORY CARD BECAUSE STEPS 2 TO 3 BELOW MUST BE DONE
CONTINUOUSLY.
THINGS TO DOWNLOAD: 1. ADB and FASBOOT drivers
Download and install this.
Credits to: XDA Forum
1A. Download and install Tinno Driver
download from here: https://mega.nz/#!T4li1JjL!aM1FTqnF9uyYY_PxeRGV3vgPyZcdRKhC1ih0ZQY1zY
2. Wiko Fever / Micromax Canvas 5 / MyPhone My36 Custom Recovery
Download > http://www.sendspace.com/file/4g87bj
Credits to: manos78 of XDA Forum
3, SuperSU 2.52 (BET A) Download here and put it sa SD card
Credits to: chainfire

-------------------------- STEP-BY-STEP PROCEDURE


1a. Unlocking your bootloader. (Hinde ko alam kung kelangan pa to, pero sa
instructions ni manos78 ng XDA, dapat daw gawin.. Kaya ginawa ko rin)
WARNING!!! Please make a backup copy of your important files
muna before proceeding to the next step. Your phone will be
formatted and all your files will be deleted.
1b. Go to Settings > Developer > USB Debugging > Turn it on, then OEM Unlock
> Turn it on.
1c. Connect your phone to the computer. Bigyan ng access ang ADB, may lalabas
na alphanumeric sa screen ng phone, just tap ok. 1d. Open Minimal ADB and
Fastboot. type adb reboot-bootloader
your phone will now reboot to bootloader.
1e. On ADB pa rin, type fastboot oem unlock
on the phone, press volume up for yes. then reboot your device..
Magrereformat na ngaun ang phone.. Wait lang matapos at magreboot ng
normal.
after rebooting, punta ulit sa settings, turn on ulet ang USB Debugging.
FLASHING THE CUSTOM RECOVERY:
2. Right click the Minimal ADB and Fastboot icon on the desktop (if you created
one while installing), then click on "Open file location". In that folder, extract the
wiko-custom-recovery.zip
After extracting the file, rename it to recovery.img
2b. Open Minimal ADB and Fastboot again. Type adb reboot-bootloader once
again.

Your device will boot to fastboot mode. 2c. On ADB, type fastboot flash recovery
recovery.img
After matapos magflash, hold volume down, up and power button simultaneously
hanggang sa lumabas yujng 2 options, then press volume up for recovery.
At this point, installed na ang Custom recovery pero HINDI pa rooted.. NOTE 2:
If recovery.img does NOT work, remove the .img [recovery.img -->
recovery only]
ROOTING:
3a. Flash the SUperSU 2.52 beta. 3b. Reboot, then select NO if you want to fix
root permission.
CONGRATULATIONS! YOUR PHONE IS NOW ROOTED AND YOUR
WARRANTY IS VOIDED. PS:
Pwede din palang magbackup muna before magroot. Hinde ko lang alam kung
working ang backup and restore ng Carliv na to.. Actually pang Wiko Fever to,
sinubukan ko lang kagabi kung gagana sa My36. E gumana, kaya I'm sharing it
now. Wala pa tayong Stock ROM. Kung may warranty claims kayo and rooted na,
hinde na pwede, kelangan munang bumalik sa stock para walang trace ng
rooting.. Maidagdag ko na rin, in some cases, bumibitaw ang recovery at
bumabalik sa stock, to fix that, after rooting, delete recovery-from-boot.p file sa
system. PPS: Please, please, please! As is yan.. Ginandahan ko lang
pagkakasunod-sunod ng procedure galing sa XDA.. Wag nyo kong tatanungin
kung pano kase eto na rin mismo ginawa ko, :) MAGBASA LANG :) LAKS ng
LOOB at pananalig na magagawa nyo #CHOSS!
SALAMAT SALAMAT SALAMAT to TEDDY UMALI for the link! :)
Make sure your phones battery level is not below 15%.
Make a backup of your important files. Your phone will be formatted.
Go to Settings > Security > then check Unknown sources.

Enable USB debugging by going to Settings > About > then tap the build number
seven times. After that, you will see Developer option from Settings tap it and
check USB debugging.
Turn on OEM Unlock
I am not held liable if your device got bricked. Follow this at your own risk.

How to install custom recovery for Myphone My36


Things you need
Desktop or laptop with Windows operating system
USB cable (make sure its properly working)
ADB and Fastboot drivers
Tinno Driver
Myphone My36 Custom Recovery
Unlocking the bootloader

Connect your phone to the computer.


Install Minimal ADB and Fastboot.
From the desktop shortcut, right click Minimal ADB and Fastboot and run it as
administrator.
You are now on the command window. Make sure to keep your phone screen on,
remove the password and any kind of lock temporarily. Now on command window
type adb devices then press enter.
Check your phone, grant adb access from your phone. Just tap Ok.
Go back to the command window type adb reboot-bootloader then press enter. Your
phone will now going to reboot automatically.
Now type fastboot oem-unlock. Check your phone again, when asking for your
permission just use the volume up for yes then reboot your device. Now your phone
will be formatted and may take some time.
Close the Minimal ADB and Fastboot.
If you have followed the steps correctly, your device is now OEM unlocked. Go to
Settings > Developer option > Turn on USB Debugging. We will now going to flash
the custom recovery.

Installing the custom recovery

From the desktop, right click Minimal ADB and Fastboot and choose Open file
location.
Navigate the folder where you saved the recovery_mod_wiko_fever_beta3.zip that
you downloaded earlier. Extract it and copy the file inside the Minimal ADB and
Fastboot folder.
From recovery_mod_wiko_fever_beta3.img rename it to recovery.img
Go back to your desktop open Minimal ADB and Fasboot. Dont forget to run it as
administrator.
On command window, type adb devices to confirm if your device is listed. Now type
adb reboot-bootloader
Your phone is now on fastboot mode, type fastboot flash recovery recovery.img
Youre done.
You have now custom recovery installed in your Myphone My36, just to make things
clear, we used a custom recovery for Wiko Fever which is Myphone My36 OEM so
basically its compatible for our device. You can now continue rooting your Myphone
My36. If you have any question, feel free to post a comment. Dont forget to
subscribe to get the latest updates. Thank you for reading guys.

Credits: Tutorial originally posted by Yukito Yamamoto from Myphone My36


Facebook group. Manos78 of XDA Forum for custom recovery.

You might also like