Scribd
Upload
33 views

Tutorial 6

toturial hari ke 6

Uploaded by

yani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
33 views

Tutorial 6

toturial hari ke 6

Uploaded by

yani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Part C.

Tutorial Part 1 - Creating, Analyzing and Designing the Basic Model


16. In the plan view, click on frame elements 43 and 48 to select them.
17. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
18. In the Frame Sections area click on the W21X44 name once to highlight it and then
click the OK button.
19. From the Select menu select Select and then Groups from the submenu. This will
display the Select Groups dialog box.
20. Click on the group name FRMGIRD once to highlight it and then click the OK
button.
21. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
22. In the Frame Sections area click on the W24X55 name once to highlight it and then
click the OK button.
23. Click the Show Undeformed Shape button
to clear the display of the assigned
sections so that you can see the frame element labels again.
24. Click in the window labeled X-Y Plane @ Z=24 to make sure it is active.
25. Click the Down One Gridline button
floor plan at Z=12.

on the main toolbar to display the second

26. From the Select menu select Select and then Labels from the submenu. This will
display the Select by Labels dialog box.
27. Click the Element Type drop-down box and select Frame.

Click the Element Type drop-down box and select Frame.

Type 15 in the Start Label edit box, 24 in the End Label edit box and 9 in the
Increment edit box.

Click the OK button.

28. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.

Step 7

53

SAP2000 Detailed Tutorial Including Pushover Analysis


29. In the Frame Sections area click on the W16X26 name once to highlight it and then
click the OK button.
30. In the plan view, click on frame elements 16, 18, 19, 20, 21 and 23 to select them.
31. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
32. In the Frame Sections area click on the W18X40 name once to highlight it and then
click the OK button.
33. In the plan view, click on frame elements 17 and 22 to select them.
34. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
35. In the Frame Sections area click on the W24X62 name once to highlight it and then
click the OK button.
36. From the Assign menu select Clear Display of Assigns to clear the display of frame
assigns from the plan view.
37. Click in the window labeled 3-D View to make sure it is active. Note when the
window is active, its title bar will be highlighted.
38. Click the Set Elements button
on the main toolbar (or select Set Elements
from the View menu). This displays the Set Elements Dialog box.
39. In this dialog box:

In the Frames area uncheck the Labels box.

Click the OK button.

40. From the Select menu select Select and then Groups from the submenu. This will
display the Select Groups dialog box.
41. Click on the group name BRACE1 once to highlight it and then click the OK button.
42. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.

54

Step 7

Part C. Tutorial Part 1 - Creating, Analyzing and Designing the Basic Model
43. In the Frame Sections area click on the TS5X5X1/4 name once to highlight it and
then click the OK button.
44. From the Select menu select Select and then Groups from the submenu. This will
display the Select Groups dialog box.
45. Click on the group name BRACE2 once to highlight it and then click the OK button.
46. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
47. In the Frame Sections area click on the TS4X4X1/4 name once to highlight it and
then click the OK button.
48. From the Select menu select Select and then Groups from the submenu. This will
display the Select Groups dialog box.
49. Click on the group name FRCOLS once to highlight it and then click the OK button.
50. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
51. In the Frame Sections area click on the W14X132 name once to highlight it and then
click the OK button.
52. From the Select menu select Select and then Groups from the submenu. This will
display the Select Groups dialog box.
53. Click on the group name BRCOLS once to highlight it and then click the OK button.
54. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
55. In the Frame Sections area click on the W8X58 name once to highlight it and then
click the OK button.
56. From the Select menu select Select and then Groups from the submenu. This will
display the Select Groups dialog box.
57. Click on the group name COLS once to highlight it and then click the OK button.

Step 7

55

SAP2000 Detailed Tutorial Including Pushover Analysis


58. From the Select menu select Deselect and then Groups from the submenu. This
will display the Select Groups dialog box.
59. In this dialog box:

Click on the group name FRCOLS once to select (highlight) it.

Hold down the Ctrl key on the keyboard and click on the BRCOLS group name
once to highlight it and add it to the selection.

Click the OK button.

60. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
61. In the Frame Sections area click on the W8X31 name once to highlight it and then
click the OK button.
62. From the Assign menu select Clear Display of Assigns to clear the display of frame
assigns from the 3-D view.
63. Click the Save Model button
menu to save the file.

on the main toolbar, or select Save from the File

This completes the assignment of frame section properties.

56

Step 7

Part C. Tutorial Part 1 - Creating, Analyzing and Designing the Basic Model

Step 8: Assigning Shell Sections


1. Click in the window labeled 3-D View to make sure it is active. Note when the
window is active, its title bar will be highlighted.
2. Click the Set Elements button
on the main toolbar (or select Set Elements
from the View menu). This displays the Set Elements Dialog box.
3. In this dialog box:

In the Shells area uncheck the Hide box.

Click the OK button.

4. Click in the window labeled X-Y Plane @ Z=12 to make sure it is active. Note when
the window is active, its title bar will be highlighted.
5. Click the Set Elements button
on the main toolbar (or select Set Elements
from the View menu). This displays the Set Elements Dialog box.
6. In this dialog box:

In the Shells area uncheck the Hide box.

Click the OK button.

7. Click the Up One Gridline button


plan at Z=24.

on the main toolbar to display the roof level

8. From the Select menu select Select and then Groups from the submenu. This will
display the Select Groups dialog box.
9. Click on the group name ROOF once to highlight it and then click the OK button.
10. From the Assign menu select Shell and then Sections from the submenu. This will
display the Define Shell Sections dialog box.
11. In the Shell Sections area click on the ROOF name once to highlight it and then click
the OK button.
12. From the Assign menu select Clear Display of Assigns to clear the display of shell
assigns from the plan view.

Step 8

57

SAP2000 Detailed Tutorial Including Pushover Analysis


13. Click the Save Model button

on the main toolbar to save the file.

This completes the assignment of shell section properties.

58

Step 8

You might also like