Scribd
Upload
402 views

TR10RS1 User Manual Android

TR10RS1 User Manual Android

Uploaded by

Benito Camello
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
402 views

TR10RS1 User Manual Android

TR10RS1 User Manual Android

Uploaded by

Benito Camello
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Quick Start Guide

For Android Tablet


TR10RS1

Federal Communication Commission Interference Statement


This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
Caution:
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation

RF Exposure Information (SAR)


This device meets the governments requirements for exposure
to radio waves. This device is designed and manufactured not to
exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of the
U.S. Government.
The exposure standard employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit set by
the FCC is 1.6 W/kg. Tests for SAR are conducted using
standard operating positions accepted by the FCC with the EUT
transmitting at the specified power level in different channels.
The highest SAR value for the device as reported to the FCC is
1.39 W/kg when placed next to the body.

CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.

ATTENTION
Risque d'explosion si la batterie est remplace par un type
incorrect. Recyclez les batteries usages selon les instructions.

Attention: Teachers, Parents and Adult Supervisors


This product is an educational tool designed for school children,
ageing 6 and up. Children under 10 must be supervised when
using this tablet. It is a must to have a thorough explanation to
students on safe and proper handling of the tablet, power supply,
battery pack, and power cord.

Be sure to keep the


power cord away from
younger children
Please ensure that students understand the following:

As with all electrical products, precautions should be


observed during handling and use to prevent electric
shock. The power supply (adapter) should not be handled
by the children.

Emphasize to students that this device is an educational


tool and not a toy. The computer, power supply, battery
pack or power cord should not be dropped, crushed,
stepped on or otherwise abused.

Ensure students understand the safe and proper


handling of power cord and power supply. Misuse could
result in serious injury.

The teacher, parent or adult supervisor should


periodically inspect the computer; power supply and
power cord for damage and replace it, if necessary.

Students should report any damage or loosen parts to


their teacher, parents or adult supervisor, immediately.

Do not leave the tablet plugged in or on when enclosed


in a non-vented container, such as a school backpack, as
overheating may occur.

It is recommended that students should take a 5 minute


break every 30 minutes of use.

Safety Precautions
Following picture is a list of precautionary measure the students
must understand before using this computer inside the
classroom or home environment:

1.

Do not place near the fire or other source of heat.

2.

Do not expose the tablet into magnetic fields.

3.

Do not expose the tablet under direct sunlight.

4.

Do not expose the tablet to rain or moisture.

5.

Do not place heavy objects to add heavy pressure


on the tablet.

6.

Do not drop the tablet.

Package contents
Carefully unpack your box and take out the items listed below.
If any of the items are missing or damaged, please contact
your dealer immediately:
One tablet

One AC adapter

One stylus

One magnifying lens One sensor

This quick guide brochure

One USB cable

Tablet layout

No.

Name

No.

Name

Light sensor

Stylus slot

Front facing camera

I/O cabinet
(See page 7 for details)

Microphone

Charging indicator

Touchscreen

No.

Name

No.

Name

Power button

Volume up/down

Microphone

Speaker

Rear facing camera

Micro SIM card slot

No.

Name

No.

Headphone

Micro SD card slot

Micro HDMI port

Name
Micro USB DC IN /
Micro USB port
Micro SIM card slot

Charging your tablet


If your tablet is just being unpacked from the box, you need
to charge the tablet first. It will take around 4 to 5 hours to be
fully charged.

1. Plug the USB head of the cable into the adapter.


2. Plug the micro-USB head of the cable - with the side
marked with B or an icon facing down - into the
micro-USB port on your tablet.
3. Plug the adapter into a wall-socket.

Powering ON/OFF your tablet


To power on your tablet
Press and hold the power button
down until the screen turn on.

To power off your tablet


To turn off your tablet, follow these steps:
1. Press and hold the Power Lock button.
2. The Power-off menu appears as shown below. Touch
Power off.

3. Touch OK to power down your tablet.

Inserting a storage card


Your tablet supports micro-SD cards with maximum storage
space up to 32G. You can insert the micro SD card and pull
it out without powering down the tablet. To do so, follow the
steps below.

Install your Micro SD Card


1. Hold your tablet with front side up.
2. Insert your micro SD card in the direction as shown
above.

Remove your Micro SD Card


1. Push and release the micro SD card. This will
unlock the card.
2. Pull out the micro SD card.

10

Installing your magnifying lens


With a few steps, you can turn your tablet into a microscope.

1.

Gently press the magnifying lens over the rear-facing


camera. Make sure the bottom of the lens is fitted into
the outer rim of the camera.

2.

Activate any camera APP in your tablet.

3.

Gently press the lens on the object or tissue you want


to observe.

11

Specifications
Processor

Memory
Storage
Wireless
Touchscreen
Cameras
Battery

Input/Output

Intel Atom Z3735F


Quad core
1.33 GHz
1 MB L2 Cache
DDR3L- 1333
Default 1 GB/2 GB
eMMC v4.512
16/32 GB
WLAN 2.4GHz b/g/n, BT 4.0
3G (optional)
10.1-inch 1280 x 800 TN/IPS
Multi-touch and Capacitive pen
support
Front: 0.3M (IPS: 1.26M)
Rear: 2M (IPS: 5M)
3Cell
Li-polymer
6300 mAh (TN)
8100mAh (IPS)
1x micro-USB2.0 OTG port (type
A/B)
1 x Mic/head phone jack combo
1 x micro-HDMI
1 x micro-SD card slot (32G max)
1 x micro-SIM card slot

12

Speaker &
Mic

Build-in Speaker x 2
Internal MIC x 1

USB-Adapter

DC Output: 5V/2A/10 Watt


Input Voltage: 100 ~ 240VAC
Input Frequency: 47 ~ 63Hz

Dimension
(mm)

274.8 (W) x 176.6 (H) x 12.7 (D)

Weight

750 g (w/o adapter)

13

You might also like