Scribd
Upload
88 views

Nomenclature and Terminology For Extension-Type Variable Area Meters (Rotameters)

ISA

Uploaded by

Fernando Bustos Muñoz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
88 views

Nomenclature and Terminology For Extension-Type Variable Area Meters (Rotameters)

ISA

Uploaded by

Fernando Bustos Muñoz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

RECOMMENDED PRACTICE

ISARP16.41960

Nomenclature and Terminology


for Extension-Type Variable
Area Meters (Rotameters)

Approved 30 July 1960


TM

ISAThe Instrumentation,
Systems, and
Automation Society

ISARP16.41960, Nomenclature and Terminology for Extension Type Variable Area Meters (Rotameters)

ISBN 0-87664-343-8
Copyright 1960 by the Instrument Society of America. All rights reserved. Printed in the United
States of America. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), without the prior written permission of the publisher.
ISA
67 Alexander Drive
P.O. Box 12277
Research Triangle Park, North Carolina 27709

Preface

This Recommended Practice has been prepared as a part of the service of ISA toward a goal of
uniformity in the field of instrumentation. To be of real value this report should not be static, but
should be subject to periodic review. Toward this end the Society welcomes all comments and
criticisms, and asks that they be addressed to the Standards and Practices Board Secretary,
ISA, 67 Alexander Drive, P.O. Box 12277, Research Triangle Park, North Carolina 27709, e-mail:
[email protected].
This report was prepared by the Committee on Variable Area Meters 8D-RP16.
NAME

COMPANY

L. N. Combs, Chairman
S. Blechman
W. A. Crawford, Past Chairman
W. F. Dydak
R. W. Eberly
H. V. Mangin
T. E. Quigley
R. L. Shapcott

E.I. du Pont de Nemours & Company


Brooks Instrument Company, Inc.
E.I. du Pont de Nemours & Company
Schutte & Koerting Company
Schutte & Koerting Company
Fischer & Porter Company
E.I. du Pont de Nemours & Company
Weston Instruments Div., Daystrom Inc.

Approved for Tentative Publication by the Standards & Practices Board July 1960.
NAME

COMPANY

G. G. Gallagher, Standards & Practices


Department Vice President
F. E. Bryan, Aero-Space Standards
Division Director
R. E. Clarridge, Intersociety Standards
Division Director
F. H. Winterkamp, Production Processes
Standards Division Director
E. J. Minnar, Standards & Practices
Board Secretary

The Fluor Corporation


Douglas Aircraft Company
General Electric Company
E.I. du Pont de Nemours & Company
ISA Headquarters Staff

The assistance of those who aided in the preparation of this Recommended Practice by
answering questionnaires, offering suggestions, and in other ways is gratefully acknowledged.

ISA-RP16.4-1960

Contents

1 Purpose .............................................................................................................................. 7
2 History and development ................................................................................................. 7
3 Scope ................................................................................................................................. 7
4 Definitions and terminology ............................................................................................ 7
4.1 Indicating extensions ............................................................................................... 7
4.2 Transmitting extensions ........................................................................................... 8
4.3 Alarms extensions ............................................................................................... 8
4.4 Other extensions ..................................................................................................... 8

ISA-RP16.4-1960

1 Purpose

The Recommended Practice is intended to provide a basis for nomenclature and terminology for
extension type variable area meters (rotameters).

2 History and development

The resultant of a survey sent out in 1954 to cover 250 meter users and manufacturers indicated
among other factors, the need for standardized terminology. Using these replies as a basis, a
committee was formed and this Recommended Practice was developed.

3 Scope

This Recommended Practice has been prepared to define the nomenclature and terminology of
various types of extensions applicable to 5 inch (125 mm) glass and metal tube variable area
meters (rotameters) covered in ISA-RP 16.1.2.3.

4 Definitions and terminology

An extention is a device for translating float motion into a useful secondary function for either
indicating, alarming, transmitting or other secondary functions. An extention usually consists of
an extension tube, an extension housing, and the necessary adaptor to the primary rotameter,
but may be any auxiliary device fixed to the rotameter which performs the functions outlined
below.

4.1 Indicating extensions


4.1.1 Magnetic
A device that provides flow rate indication by means of a magnetic coupling between the
extension of the metering float and an external indicator follower surrounding the extension tube.
4.1.2 Direct
A device that provides flow rate indication by means of viewing the position of the extension of
the metering float within a glass extension tube.

ISA-RP16.4-1960

4.2 Transmitting extensions


4.2.1 Pneumatic
A system that converts float position to a proportional standard pneumatic signal. A magnetic
coupling connects the internal float extension with an external mechanical system linked to a
pneumatic transmitter.
4.2.2 Electric or electronic
A system that converts float position to a proportional electric signal (either AC or DC), or to a
proportional shift or unbalance in impedance which is balanced by a corresponding shift in
impedance in the receiving instrument.

4.3 Alarms extensions


4.3.1 Magnetically actuated
A device attached to the meter body which contains an electrical switch and which is
magnetically actuated by the metering float extension to signal a high or low flow. The switch is
adjustable with respect to the float position over a range equal to the travel of the metering float.
Standard switch ratings are usually 0.3 amperes for 110 volt, 60 cycle AC supply (five amperes or
more if relays are used).
4.3.2 Electrically operated
Usually a highly sensitive induction type device for signalling high or low flows or deviations from
any set flow. The device consists of a sensing coil positioned around the extension tube of the
rotameter. Movement of the metering float into the field of the coil causes a low level signal
change which is usually amplified to a level suitable for performing annunciator or control
functions.

4.4 Other extensions


4.4.1 Recording
The recorder is attached directly to the meter body with the recorder pen positioned by the
metering float through a magnetic coupling.
4.4.2 Integrating
In the same manner as described under 4.4.1, an integrator which derives its input from the
motion of the float can be installed within the extension housing.
4.4.3 Controlling
In the same manner as described under 4.4.1, a controller which derives its input from the motion
of the float can be installed within the extension housing.

ISA-RP16.4-1960

Developing and promulgating technically sound consensus standards,


recommended practices, and technical reports is one of ISA's primary
goals. To achieve this goal the Standards and Practices Department
relies on the technical expertise and efforts of volunteer committee
members, chairmen, and reviewers.
ISA is an American National Standards Institute (ANSI) accredited
organization. ISA administers United States Technical Advisory
Groups (USTAGs) and provides secretariat support for International
Electrotechnical Commission (IEC) and International Organization for
Standardization (ISO) committees that develop process measurement
and control standards. To obtain additional information on the
Society's standards program, please write:
ISA
Attn: Standards Department
67 Alexander Drive
P.O. Box 12277
Research Triangle Park, NC 27709

ISBN: 0-87664-343-8

You might also like