8/30/2016
3005(AlMn1Mg0.5,3.0525,A93005)Aluminum::MakeItFrom.com
MakeItFrom.com
Find
and
Compare
3005 (AlMn1Mg0.5, 3.0525,
A93005) Aluminum
3005 aluminum is an alloy of aluminum, further classified within the AA 3000
series (aluminum-manganese wrought alloy). 3005 is the Aluminum Association
(AA) designation for this material. In European standards, it will typically be
given as EN AW-3005. A93005 is the UNS number. Additionally, the EN chemical
designation is AlMn1Mg0,5.
It has 13 common variants, each represented as a separate material. The Material
Properties section below shows ranges encompassing all variants. For more
specific values, follow the links in the Variant Materials section.
Material Properties
Base Metal Price: 16 % rel
Density: 2.8 g/cm3 (170 lb/ft3)
Elastic (Young's, Tensile) Modulus: 72 GPa (10 x 106 psi)
Electrical Conductivity: 42 % IACS
Electrical Resistivity Order of Magnitude: -7 10x -m
Elongation at Break: 1.2 to 13 %
Melting Onset (Solidus): 640 C (1180 F)
http://www.makeitfrom.com/materialproperties/3005AlMn1Mg0.53.0525A93005Aluminum
1/5
8/30/2016
3005(AlMn1Mg0.5,3.0525,A93005)Aluminum::MakeItFrom.com
Modulus of Resilience (Unit Resilience): 19 to 400 kJ/m3
MakeItFrom.com
Poisson's
FindRatio: 0.33
and
Compare
Shear Modulus: 26 GPa (3.8 x 106 psi)
Specific Heat Capacity: 890 J/kg-K
Strength to Weight Ratio: 50 to 93 kN-m/kg
Tensile Strength: Ultimate (UTS): 140 to 260 MPa (20 to 38 x 103 psi)
Tensile Strength: Yield (Proof): 52 to 240 MPa (7.5 to 35 x 103 psi)
Thermal Conductivity: 160 W/m-K
Thermal Diffusivity: 64 m2/s
Thermal Expansion: 23 m/m-K
Unit Rupture Work (Ultimate Resilience): 1.3 to 2.1 MJ/m3
The length of each bar compares the given value to the highest value in the
database.
Alloy Composition
Aluminum (Al): 95.7 to 98.8 %
Manganese (Mn): 1.0 to 1.5 %
Magnesium (Mg): 0.2 to 0.6 %
Iron (Fe): 0 to 0.7 %
Silicon (Si): 0 to 0.6 %
http://www.makeitfrom.com/materialproperties/3005AlMn1Mg0.53.0525A93005Aluminum
2/5
8/30/2016
3005(AlMn1Mg0.5,3.0525,A93005)Aluminum::MakeItFrom.com
Copper (Cu): 0 to 0.3 %
MakeItFrom.com
Find0 to 0.25 %
Zinc (Zn):
and
Compare
Residuals: 0 to 0.15 %
Chromium (Cr): 0 to 0.1 %
Titanium (Ti): 0 to 0.1 %
Followup Questions
How are the material properties defined?
How do aluminum tempers work?
How does 3005 aluminum compare to other aluminum alloys?
How does it compare to other metal alloys?
Variant Materials
3005-H12 Aluminum
3005-H25 Aluminum
3005-H14 Aluminum
3005-H26 Aluminum
3005-H16 Aluminum
3005-H27 Aluminum
3005-H18 Aluminum
3005-H28 Aluminum
http://www.makeitfrom.com/materialproperties/3005AlMn1Mg0.53.0525A93005Aluminum
3/5
8/30/2016
3005(AlMn1Mg0.5,3.0525,A93005)Aluminum::MakeItFrom.com
MakeItFrom.com
3005-H19 Aluminum
3005-H29 Aluminum
Find
and
Compare
3005-H22 Aluminum
3005-O Aluminum
3005-H24 Aluminum
Similar Alloys
3103 (AlMn1, 3.0515, N3, A93103) Aluminum
3303 (3303-O, A93303) Aluminum
3003 (AlMn1Cu, 3.0517, A93003) Aluminum
3004 (AlMn1Mg1, 3.0526, A93004) Aluminum
3105 (AlMn0.5Mg0.5, 3.0505, N31, A93105) Aluminum
Further Reading
Aluminum Standards and Data, Aluminum Association Inc., 2013
ASTM B209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and
Plate
EN 485-2: Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical
properties
http://www.makeitfrom.com/materialproperties/3005AlMn1Mg0.53.0525A93005Aluminum
4/5
8/30/2016
3005(AlMn1Mg0.5,3.0525,A93005)Aluminum::MakeItFrom.com
EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of
MakeItFrom.com
wrought products. Chemical
composition and form of products
Find
and
Compare
Copyright 2009-16: Disclaimer and Terms. Last updated on 2016-08-06.
http://www.makeitfrom.com/materialproperties/3005AlMn1Mg0.53.0525A93005Aluminum
5/5
