Scribd
Upload
82 views

Lens Selector User Manual

This document is the user manual for a Lens Selector software. It contains instructions for installing and using the software to select camera lenses based on camera specifications and scene parameters. The manual describes how to select a lens based on entering a camera model and resolution along with object distance and width. It then lists the recommended lens. It also explains how to simulate monitoring scenes by adjusting camera height, focal length, and object placement and size to visualize the field of view and measurements.

Uploaded by

Nigel Lim
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
82 views

Lens Selector User Manual

This document is the user manual for a Lens Selector software. It contains instructions for installing and using the software to select camera lenses based on camera specifications and scene parameters. The manual describes how to select a lens based on entering a camera model and resolution along with object distance and width. It then lists the recommended lens. It also explains how to simulate monitoring scenes by adjusting camera height, focal length, and object placement and size to visualize the field of view and measurements.

Uploaded by

Nigel Lim
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Lens Selector

User Manual
UD.6L0202D1046A01

User Manual of Lens Selector

Thank you for purchasing our product. This manual applies to Lens Selector software,
please read it carefully for the better use of this software. The contents in this
manual are subject to change without notice.

User Manual of Lens Selector

Table of Contents
Chapter 1 Introduction .................................................................................................. 3
1.1 Overview ............................................................................................................... 3
1.2 System Requirements ........................................................................................... 3
1.3 Conventions .......................................................................................................... 3
1.4 Version Information .............................................................................................. 3
Chapter 2 Running Lens Selector ................................................................................... 4
Chapter 3 Operating Lens Selector ................................................................................ 5
3.1 Selecting Lens ....................................................................................................... 5
3.2 Simulating the Monitoring Scene ......................................................................... 5

User Manual of Lens Selector

Chapter 1 Introduction
1.1 Overview
The Lens Selector is a user-friendly and installation-free tool to help users to select a
proper lens for his camera according on the actual demand. It offers an information
database of both camera and lens to satisfy different requirements. And you can
simulate the scene visually via adjusting the height of the camera, focal length and
other parameters after you select a lens.

1.2 System Requirements


Operating System: Microsoft Windows XP/ Server 2003 (32-bit), Windows 7 / Server
2008 (32/64-bit);
CPU: Intel Pentium4 3.0 @3.00GHz or higher;
RAM: 1GB or higher;
Video Card: RADEON X700 series;
Display: 1024*768 resolution or above

1.3 Conventions
In order to simplify the description, we define the Lens Selector as software in
the following chapters.

1.4 Version Information

After installing the software successfully, run the software and click
on the
control panel to enter the Lens Selector interface.
Click the Help > About tab at the top to view the version information or click Help >
User Manual and get the User Manual of the software.

User Manual of Lens Selector

Chapter 2 Running Lens Selector

Run the software as the administrator, and click


the Lens Selector main interface.

on the control panel to enter

Note: You must run the software as administrator. When you log in the operating
system as an administrator, you can run it directly and when you login as other
operators, you need to right click on the application and choose run as administrator.

User Manual of Lens Selector

Chapter 3 Operating Lens Selector


3.1 Selecting Lens
Purpose:
Compelete the specified parameters and the software will recommend the applicable
lens according to the given parameters.
Steps:
1. On the main interface, select the parameters of Camera Model and Resolution in
the drop-down list.
2. Edit the parameters of Object Distance and Object Width according to the actual
demand by clicking
and
or inputting content in the textbox directly.
3. The recommended lens will be listed in the Recommended Lens area.
Example:
Select the camera model as 852, and the resolution as 1600*1200. Adjust the object
distance and width to 12m and 9m, and then the focal distance and recommended
lens are displayed.

3.2 Simulating the Monitoring Scene


Purpose:
After the recommendation of the lens, the software simulates the monitor scene
with displaying the value and section view of the view angle and focal length. Adjust
the location of subject and camera to simulate the application scene and get the
measurement of it. Then you can install and adjust the camera according the given
information.
Notes:
1 When you adjust the object or parameters on the right side, the parameters on
the left side will not change.
2 The Scene Simulation Interface will be synchronized with the adjustment.
5

User Manual of Lens Selector

Longitudinal Section Diagram

Close shot object


Long shot object

Adjust the length of axis


Click the

and

to adjust the length of the axis on your demand.

Adjust the camera bracket


Drag the

of the camera to the upside or downside to adjust the height of the

camera. For the viewing angle and object distance are fixed, the camera tilt angle will
be changed.
Adjust the object ratio in the image
Drag the
of the corresponding object to the left or right to adjust the distance
between object and lens, and then object ratio and the object width will be changed
at the same time.
Drag the

of the corresponding object to the upside or downside to adjust the

height of the object.


Cross-section Diagram

You can drag the

to the left or right, and the number next to the red line

displays the current view width.

0101001030609
6

You might also like