0% found this document useful (0 votes)
474 views

Fixed Vs Pinned

A pinned base column and a fixed base column differ in how loads are transferred to the building foundation. A pinned base column allows for horizontal and vertical load transfer but flexibility in moment loads, requiring more steel. A fixed base column transfers all load types stiffly to the foundation, requiring less steel but potentially larger foundations to support moment loads. According to an example, a pinned base column design for a specific building was 8969 lbs while a fixed base was 7747 lbs, showing fixed base can reduce steel needs. The appropriate choice depends on balancing foundation and steel costs for the specific project loads and location.

Uploaded by

gopi_ggg20016099
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
474 views

Fixed Vs Pinned

A pinned base column and a fixed base column differ in how loads are transferred to the building foundation. A pinned base column allows for horizontal and vertical load transfer but flexibility in moment loads, requiring more steel. A fixed base column transfers all load types stiffly to the foundation, requiring less steel but potentially larger foundations to support moment loads. According to an example, a pinned base column design for a specific building was 8969 lbs while a fixed base was 7747 lbs, showing fixed base can reduce steel needs. The appropriate choice depends on balancing foundation and steel costs for the specific project loads and location.

Uploaded by

gopi_ggg20016099
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Issue: 1.

14
By Nathan Miller, Associate Engineer, NBS-IN

Choosing a Column Base for your Building:


What's the difference between Fixed and Pinned Base Columns?

Column bases are the foundations for the columnar components of a steel building. The column base
transfers loads to the building foundation and acts as a support for the structural loads. There are two key
methods of connecting the column base to the foundation: Fixed and Pinned Base.
Using fixed as opposed to pinned base columns could have an impact on the overall cost of a project. Do
you put more money into the steel structure to support the loads and deflections? Or do you put more
money into the foundations to resist the moment, or bending? The difference can be illustrated with a
flag pole. A flag pole is fixed base, it carries its only weight as well as any wind that blows on it. If the
pole was a pinned base it would want to fall over like there was a hinge at the bottom.
A pinned base column is the standard column base found in most metal buildings. This
connection is pinned because it has enough stiffness to apply horizontal and vertical
loads to the foundations, but enough flexibility to not apply moment. When deflection requirements are
very stringent, pinned base will require much more steel than fixed base. The pinned base is typically
very easy to install. Pinned base will be smaller at the base, but much larger in the haunch.
A fixed base column is more of a special situation base connection. This base has a lot of
stiffness and will apply horizontal, vertical, and moment loads to the foundations. The additional
stiffness at the base and in the columns, means less stiffness is required from the rest of the
buildings members. The foundations may need to be larger than the pinned base because of this
moment. The installation of fixed base columns can also be more difficult because of the additional
plates on the column and anchor rods required. Fixed base columns must also be straight columns
and are typically deeper at its base in comparison to pinned base. Typically fixed base columns are
recessed below finished floor. The graphic of the fixed base column is just an example of what the
baseplate could look like. There are a few options for this condition depending on the size of the
building and the loading.

Example
Framing Type: Rigid Modular Single slope (2 @ 50'-0")
Building Width: 100'-0"
Building Low Eave Height 40'-0"
Slope: 0.5 : 12
Horizontal Deflection Required = H/360

Frame Weight
Wind Horizontal Deflection

Pinned Base
8969 lbs
H/132

Fixed Base
7747 lbs
H/364

Note: These results cannot be applied to projects of similar size. Location will determine the
economics of your building.

Nathan Miller
Associate Engineer
[email protected]

You might also like