Scribd
Upload
521 views

Hydro Test Report

This hydro test report summarizes the testing of a 750mm dismantling joint component. The component was tested at M/s. Dhiraj Heavy Equipments Pvt. Ltd. in Narhe, Pune on September 14, 2016. The 750mm double flange dismantling joint with identification number DHP-KBL-750MM DJOINT 4 was tested at 15.3 Kg/cm2 for 5 minutes and showed no leakage or pressure drop, so it was accepted. The pressure gauge used was calibrated on June 10, 2016 and is due for recalibration on June 10, 2017. The component passed the hydro test and was found acceptable.

Uploaded by

Anonymous a8oga83
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
521 views

Hydro Test Report

This hydro test report summarizes the testing of a 750mm dismantling joint component. The component was tested at M/s. Dhiraj Heavy Equipments Pvt. Ltd. in Narhe, Pune on September 14, 2016. The 750mm double flange dismantling joint with identification number DHP-KBL-750MM DJOINT 4 was tested at 15.3 Kg/cm2 for 5 minutes and showed no leakage or pressure drop, so it was accepted. The pressure gauge used was calibrated on June 10, 2016 and is due for recalibration on June 10, 2017. The component passed the hydro test and was found acceptable.

Uploaded by

Anonymous a8oga83
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

REFERANCE NO.

- QF/QA/10/HYT/01

HYDRO TEST REPORT


COMPONENT :-750 MM Dismantling Joint
CUSTOMER:- KIRLOSKAR BROTHERS LTD. VALVE DIVISION
NAME OF FABRICATOR: - M/S. DHIRAJ HEAVY EQUIPMENTS PVT. LTD.
PLACE OF INSPECTION: - NARHE, PUNE
DATE OF INSPECTION: - 14/09/2016
THIS IS TO CERTIFY THAT OF FOLLOWING COMPONENT OF ABOVE MENTIONED
DISMANTLING JOINT IS TESTED HYDROSTASTICALLY FOR TEST PRESSURE &
DURATION MENTIONED BELOW AND NO LEAKAGE / NO PRESSURE DROP WAS
OBSERVED. SO ACCEPTED.

COMPONENT &
DRAWING NO.

IDENTIFICATION NO.

QT
Y

TEST
PRESSURE

DURATIO
N

750MM Double Flange


Dismantling Joint

DHP-KBL-750MM DJOINT 4

01

15.3 Kg/cm2

5 min

PRESSURE GAUGE DETAILS


1) PRESSURE GAUGE NO. : DHEPL/PG/002
2) CALIBRATED ON : 10.06.2016
3) NEXT CALIBRATION DUE ON : 10.06.2017
4) RANGE: 0-28 Kg/cm2

RESULT: ABOVE COMPONENTS TESTED FOR HYDRO AND FOUND ACCEPTABLE.

KBL REPRESENTATIVE

VENDORS AUTHORISED SIGNATURE

REFERANCE NO.- QF/QA/10/HYT/01

HYDRO TEST REPORT


COMPONENT :-750 MM Dismantling Joint
CUSTOMER:- KIRLOSKAR BROTHERS LTD. VALVE DIVISION
NAME OF FABRICATOR: - M/S. DHIRAJ HEAVY EQUIPMENTS PVT. LTD.
PLACE OF INSPECTION: - NARHE, PUNE
DATE OF INSPECTION: - 16/09/2016

THIS IS TO CERTIFY THAT OF FOLLOWING COMPONENTS OF ABOVE MENTIONED


PUMPS ARE TESTED HYDROSTASTICALLY FOR TEST PRESSURE & DURATION
MENTIONED ABOVE AND NO LEAKAGE / NO PRESSURE DROP OBSERVED. SO
ACCEPTED.

COMPONENT &
DRAWING NO.

IDENTIFICATION NO.

QT
Y

TEST
PRESSURE

DURATIO
N

750MM Double Flange


Dismantling Joint

DHP-KBL-750MM DJOINT 17

01

15.3 Kg/cm2

5 min

PRESSURE GAUGE DETAILS


1) PRESSURE GAUGE NO. : DHEPL/PG/002
2) CALIBRATED ON : 10.06.2016
3) NEXT CALIBRATION DUE ON : 10.06.2017
4) RANGE: 0-28 Kg/cm2

RESULT: ABOVE COMPONENTS TESTED FOR HYDRO AND FOUND ACCEPTABLE.

KBL REPRESENTATIVE

VENDORS AUTHORISED SIGNATURE

You might also like