Scribd
Upload
152 views

Ele846 - W2016

This course covers power system protection and control topics including symmetrical and unsymmetrical faults, power system protection devices like relays and fuses, and power system controls including generator voltage control and load frequency control. Students will use ETAP software for assigned projects. The course aims to teach specialized electrical power systems knowledge and applying it to network calculations, comparing models to real equipment, creating predictions with limited information, and generating protective relay settings. Students will be evaluated through quizzes, group ETAP projects, a midterm exam, and a final exam. The textbook is Power System Analysis and Design and the course is taught through lectures, tutorials, and labs over 13 weeks covering topics like symmetrical components, unsymmetrical faults, system protection, and

Uploaded by

gui0381
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
152 views

Ele846 - W2016

This course covers power system protection and control topics including symmetrical and unsymmetrical faults, power system protection devices like relays and fuses, and power system controls including generator voltage control and load frequency control. Students will use ETAP software for assigned projects. The course aims to teach specialized electrical power systems knowledge and applying it to network calculations, comparing models to real equipment, creating predictions with limited information, and generating protective relay settings. Students will be evaluated through quizzes, group ETAP projects, a midterm exam, and a final exam. The textbook is Power System Analysis and Design and the course is taught through lectures, tutorials, and labs over 13 weeks covering topics like symmetrical components, unsymmetrical faults, system protection, and

Uploaded by

gui0381
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Course Management

ELE846: Power Systems Protection and Control


Course Description:
Brief introduction of the power systems topics covered in ELE746. Topics in this course will include
Symmetrical components; Unsymmetrical Faults, single line-to-Ground fault, Line-to-Line Fault and Double
line-to-Ground Fault; power system protection, instrument transformers, Overcurrent relays, Radial line
protection, Reclosers and fuses, Directional Relays, Zones of Protection, Impedance relays, Differential
protection, pilot and digital relaying; Power system Controls, Generator-Voltage Control, Turbine-Governor
Control, Load-Frequency Control, and economic dispatch; power system stability, Swing equation, Equal-area
Criterion, Numerical Integration of the Swing Equation, and methods of improving swing equation.. Students
will be using ETAP for assigned projects.
Learning
Objectives :

At the end of this course, the successful student will be able to:
1. Use the specialized core knowledge of electrical machines learnt in the previous Energy
Conversion and power system courses (ELE637and ELE746) on Transformers,
Generators, and per unit systems to apply in power system network calculations (1d).
a.
b.

Assessment Method: Directly assessed in scores in tutorial quizzes.


Assessment Measure: Students are given rubric (marking guide) ahead of time.

2. Compares model predictions with real world equipment (2b)


a. Assessment Method: Directly assessed in scores during tutorial quizzes and
midterm exam.
b. Assessment Measure: Students are given rubric (marking guide) ahead of time.
The rubric is used to mark them.
3. Creates predictions of outcomes and justifies the assumptions made in calculating power flow in a
transmission line, when all the information are not given explicitly (3d).
a. Assessment Method: Directly assessed in scores in written project report.
b. Assessment Measure: Student is expected to follow template and rubric (i.e.
marking guide) given in the project assignment.
4. Generates solutions for choice of protective CTs, and settings of protective relays for coordinations. (4d).
a. Assessment Method: Directly assessed in scores in midterm, final exam, and
project written reports.
b. Assessment Measure: Students are given marking schemes in the exam questions
and rubric (marking guide) for projects ahead of time in the assignment.
5. Contributes to team work in an equitable and timely manner (8a).
a. Assessment Method: Indirectly assessed in scores as a component in marking the
projects which involve team work.
b. Assessment Measure: Students are given guidelines to work in a group and produce
reports on short circuit studies, protection relay settings, and stability studies.
Note:Numbersinparentheses(e.g.8a)refertothegraduateattributesrequiredbytheCanadian
EngineeringAccreditationBoard.Formoreinformation,see:
1

http://www.feas.ryerson.ca/quality_assurance/accreditation.pdf

Teaching mode:
Lecture:

3 hours/week

Tutorial / Lab: 1 hour / week => 2 hours every second week


Evaluation:
Quizzes:

5%

ETAP Group Projects: 25%


Mid-Term Test:

20 %

Final Exam:

50 %

TOTAL:

100%

Midterm exam is on Monday, February 22 at 8am

Text Book:
Power System Analysis and Design, 4th or 5th edition by J. Duncan Glover and Mulukutla S. Sarma, published
by Brooks / Cole Thomson Learning, ISBN:0-534-95367-0. Available in the university bookstore.
Website of the course in D2L: https://www.my.ryerson.ca
Your matrix account is required to access the above D2L Website.

Note: Any missed lab/tutorial/Mid-term exam will be taken as absent, if not supported by medical
report submitted in the proper form in the departmental office. There is no make-up Midterm test
due to medical. The weight of the missed midterm exam due to medical will be carried over to the final.
All quizzes or ETAP project assignments will take place during Tutorial / Lab sessions. There is no
Tutorial / Lab session in week-1.
Professor:
Dr. S. Karim, Office: ENG334, Telephone: 416 979 5000 ext 6111, email: [email protected]
Counselling hours: Mondays from 11am to 1pm in ENG334
TAs: 1. Apparao Dekka, [email protected]
2. Palash Banerjee, [email protected]
Approximate schedules of lecture topics
2

(There is no Lab/tutorial in week-1)


Week 1

Introduction &

Chap-8

Review of Symmetrical Components


Week 2
Unsymmetrical faults

Chap-9

Unsymmetrical faults

Chap - 9

Week 4

Unsymmetrical Faults

Chap -9

Week 5

Unsymmetrical Faults

Week 6

System Protection

Week 7

System Protection

Week 8

System Protection

Chap 10

Week 9

Power Systems Stability

Chap 13

Power Systems Stability

Chap - 13

Power Systems Stability

Chap - 13

Week 12

Power System Control

Chap 11

Week 13

Power System Control &

Week 3

Week 10
Week 11

Review

Chap - 9
Chap - 10
Chap-10

Chap - 11

You might also like