Scribd
Upload
79 views

Vocabulary and Questions Tanner Jones

This document defines key terms related to technical drawings, including visualization, implementation, multiview drawings, normal views, and orthographic projection. It also discusses first angle and third angle projection methods and how they differ. Finally, it provides questions about using various views and projections to develop multiview drawings.

Uploaded by

api-328204955
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
79 views

Vocabulary and Questions Tanner Jones

This document defines key terms related to technical drawings, including visualization, implementation, multiview drawings, normal views, and orthographic projection. It also discusses first angle and third angle projection methods and how they differ. Finally, it provides questions about using various views and projections to develop multiview drawings.

Uploaded by

api-328204955
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VOCABULARY AND QUESTIONS

TANNER
JONES

VISUALIZATION- IS THE ABILITY TO SEE CLEARLY IN THE MINDS EYE WHAT AN


OBJECT LOOKS LIKE.
IMPLEMENATION- THE PROCESS OF DRAWING WHAT HAS BEEN VISUALIZED.
MULIVIEW DRAWING-VIEWS THAT ARRANGE IN A STANDARD ORDER SO THAT
ANYONE TRAINED IN DRAFTING CAN UNDERSTAND THEM.
NORMAL VIEWS-FRONT-TOP, AND RIGHT SIDE VIEWS USED TO DESCRIBE
OBJECTS IN TECHNICAL DRAWINGS.
ORTHOGRAPHIC PROJECTION-THE VIEWS THAT MAKE UP MULTIVIEW
DRAWINGS THAT ARE DEVELOPED.
FIRST ANGLE PROJECTION-THE ACCEPTED METHOD OF PROJECTING VIEWS
ONTO THE QUADRANTS OR ANGLES.
THIRD ANGLE PROJECTION-THE SAME BASIC PRINCIPLES AS FIRST ANGLE
PROJECTION BUT, THE PROJECT IS PROJECTED ONTO THE PLANES FROM THE
THIRD ANGLE.

1.THEY ARE USED TO DEVELOP DRAWINGS BECAUSE THEY PUT TWO OR


MORE VIWS OF AN OBJECT ONTO IMAGIONARY PLANES PERPUNDICULAR TO
AN OBJECT.
2.THE DIFFERENCE BETWEEN THIRD AND FIRST ANGLE PROJECTION IS THAT
FIRST ANGLE PROJECS VIEWS ONTO THE QUADRANTS OR ANGLES AND THIRD
ANGLE THE OBJECT IS PROJECTED ONTO THE PLANES IN THIRD VIEW.
3.YOU CAN DETERMINE THE NUMBER OF VIEWS NEEDED TO DESCRIBE THE
SHAPE AND SIZE OF AN OBJECT BY A MULTIVIEW DRAWING.
4.YOU CAN LOCATE MULTIPLE VIEWS ON A DRAWING BY A NORMAL VIEW
DRAWING.
5.YOU CAN CREATE VARIOUS VIEWS OF AN OBJECT NY USING AN
ORTHOGRAPHIC PROJECTION.
6.THE STEPS TO DEVELOP A MULTIVIEW DRAWING IS TO
1.DETERMINE WHICH VIEW SHOULD BE USED AS THE FRONT VIEW.
2.DETERMINE WHICH VIEWS WILL BE REQUIREDTO DESCRIBE THE PART
FULLY.
3.LOCATE THE VIEWS.
4.BLOCK IN THE VIEWS WITH LIGHT,THIN LAYOUT LINES.

VOCABULARY AND QUESTIONS

TANNER
JONES

7.THE VERTICAL PLACEMENT WOULD BE .25 BECAUSE THE HEIGHT+DEPTHVERTICAL DRAWING SPACE IS .25.

You might also like