Scribd
Upload
232 views

Face Bend Test Report

The Face Bend Test Report summarizes testing of an MS plate sample for component B-01. The sample was subjected to a face bend test up to 90 degrees using a 3T mandrel according to IS: 3600:85 standards. No cracks were visible on the tension side surface of the test piece, indicating the sample passed the test requirements.

Uploaded by

thindmanmohan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
232 views

Face Bend Test Report

The Face Bend Test Report summarizes testing of an MS plate sample for component B-01. The sample was subjected to a face bend test up to 90 degrees using a 3T mandrel according to IS: 3600:85 standards. No cracks were visible on the tension side surface of the test piece, indicating the sample passed the test requirements.

Uploaded by

thindmanmohan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

FACE BEND TEST REPORT

Company Name:Report No. :- FB/2016/16


Test Date :- 28/05/16
Component ID :- B-01
Sample No. :- 02
Sample:- MS Plate EN-8
Ref Std :- IS:3600-85

One samples of above description was subjected to Face Bend Test up to 90 degree
using Mandrel 3T as per IS: 3600:85 and found satisfactory i.e. No cracks were visible
on the Tension-Side Surface of the test piece .

Analyst

Authorized Signature

You might also like