Scribd
Upload
73 views3 pages

Decoder User Manual

Uploaded by

Anonymous W7u3qzaO0P
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
73 views3 pages

Decoder User Manual

Uploaded by

Anonymous W7u3qzaO0P
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

DECODER USER MANUAL

Step 1: Rightclick to choose Netservice when preview,see below pic:

Pic 1

Pic 2
Step 2: Double "Decoder" to go into decoder setting,see below pic:

Pic 3
Channel(in red frame): channel number of decoder
Enable: enable the decoder function
HostIP: IP address of the device which you want to decode,both WAN and LAN are
OK
TCP: TCP port of the device which you want to decode
User name:

user name of the device which you want to decode

Password: password of the device which you want to decode


Channel: chanenl number of the device which you want to decode
After you set it,chick Save,see below Pic.

Pic 4
Step 3: In Pic 4,click OK to reboot the decoder,see below pic:
Note: Everytime you set
to effect it.

Pic
5

the "decode" option, need to reboot the decoder

You might also like