Scribd
Upload
270 views

Instinct-TP2 Config PC v268

Instinct-TP2 Config PC v268

Uploaded by

Madalina Budescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
270 views

Instinct-TP2 Config PC v268

Instinct-TP2 Config PC v268

Uploaded by

Madalina Budescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Configuring Traktor Pro 2 for the DJControl Instinct (Windows version)

(Updated: October 2014 for version 2.68)

1- Configuration of the ASIO driver/ MIDI channel

From the DJ Console control panel, go to the ADVANCED tab and make sure the following parameters are
set correctly:
a) MIDI channel is set to 1(Defaults).
If you have multiple MIDI controllers, or would
like to use the DJ Console on a different MIDI
channel, you will need to modify the profile
accordingly. Consult Traktors user manual for
more details.
b) Headphone channels is set to 3-4 (default)

c) Select the ASIO buffer size you wish to use.


The default value is 480 (10 ms)
NOTE: This setting can be modified while Traktor is running, but will only be applied the next time
the software is launched.
d) Pitch
-

Pitch repeat frequency: 30 ms


Pitch repeat delay: 0 ms

Hercules Technical support

-1-

2- Audio configuration in Traktor Pro 2


a) From the main menu, select File > PREFERENCES, and select AUDIO SETUP.
Choose DJControl Instinct ASIO as Audio Device.
Notice that LATENCY should reflect the configuration previously made in the Control panel.

b) Under Output Routing,


-

Under Mixing Mode, select Internal.

Set Output 3 & 4 for Monitor and Output 1 & 2 for Master.

Hercules Technical support

-2-

3- Configuration of the Midi controllers in Traktor Pro 2 (Version 2.68)


a) At the bottom of the configuration menu, click the Import button to locate
and select the .TSI configuration file.

b) A menu will then display the different categories that will be imported.

c) In Controller-Manager:
- For Device, select - DJ Instinct - Generic MIDI
- Select DJControl Instinct for both In-Port and Out-Port.

This menu also give you access to the various MIDI settings, should you wish to modify them.
(Consult chapter 13.21 Controller Manager of the user manual for more details).

Hercules Technical support

-3-

MIDI Layout for the DJControl Instinct and Traktor Pro 2


NOTE: The terms used are those employed in Traktor.

Main Configuration:
1- Tempo Adjust

: Tempo Adjust (Fine)


2- Tempo Bend (Down/Up)
3- Sync On
4- Seek position (Backward/Forward)
5- EQ (Bass/Mid/Treble)
6- Monitor Cue On
7- Load Selected
8- Tempo Bend (stepless)
9- Jog Touch/Jog Turn/Scratch
10- Volume Fader
11- Cue
12- Deck Play
13- X-Fader
14- Monitor Mix (CUE)

15- Monitor Mix (MIX)

Hercules Technical support

-4-

Navigation/ browser:

Hercules Technical support

-5-

Hot Cue

Loop

- 1: Select / Set+Store Hotcue 1

- 1: Loop Set (In/Out)

- 2: Select / Set+Store Hotcue 2

- 2: Key Lock

- 3: Select / Set+Store Hotcue 3

- 3: Loop Size (-)

- 4: Select / Set+Store Hotcue 4

- 4: Loop Size (+)

+ 1/2/3/4: Delete Hotcue

Hercules Technical support

-6-

+ 1/2/3/4: Slot Capture from Deck


(See Samples)

Effect

- 1: Effect 1 On/Off
- 2: Effect 2 On/Off
- 3: Effect 3 On/Off

-1/2/3 + PITCH: Effect 1/2/3 amount


- 4 + PITCH: Dry/Wet Group

: Filter On/ Adjust (Deck A)

: Filter On/ Adjust (Deck B)

: Effect Unit 1 On/Off (Deck A & Deck C)

: Effect Unit 2 On/Off (Deck B & Deck D)


Hercules Technical support

-7-

Sample

: Deck Play/Pause

- 1: Slot 1 Play
- 2: Slot 2 Play
- 3: Slot 3 Play
- 3: Slot 4 Play

+ 1/2/3/4: Slot Play mode (One Shot/ Looped)

Hercules Technical support

-8-

Midi Controllers/Notes map

Hercules Technical support

-9-

Hercules Technical support

- 10 -

You might also like