Scribd
Upload
23 views1 page

V F'CB D: 411.4.1.1 For Members Subject To Shear and Flexure Only

The document summarizes the shear capacity check for concrete slabs according to the National Structural Code of the Philippines 2010. It provides the equation to calculate the shear capacity of slabs as Vc = 0.17 λ √f'c bw d, where λ is 1.0 for normal-weight concrete and 0.85 for sand light-weight concrete. For an example slab with a compressive strength of 55 MPa, width of 1000 mm, and depth of 94 mm, the calculated shear capacity is 8888 units.

Uploaded by

Christian Baldo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views1 page

V F'CB D: 411.4.1.1 For Members Subject To Shear and Flexure Only

The document summarizes the shear capacity check for concrete slabs according to the National Structural Code of the Philippines 2010. It provides the equation to calculate the shear capacity of slabs as Vc = 0.17 λ √f'c bw d, where λ is 1.0 for normal-weight concrete and 0.85 for sand light-weight concrete. For an example slab with a compressive strength of 55 MPa, width of 1000 mm, and depth of 94 mm, the calculated shear capacity is 8888 units.

Uploaded by

Christian Baldo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

Shear Capacity Check for slabs


According to Section 411.4.1.1 of National Structural Code of the Phil 2010
411.4.1.1 For members subject to shear and flexure only:

V c =0.17 f ' c b w d
=1.0

=0.85

for normal-weight concrete.


for sand light-weight concrete

For shear, the reduction factor is equal to 0.75. (In 2001, the reduction factor is
equal to 0.85)
411.4.2.2

V c =0.75 ( 0.17 )( 1.0 ) 55 ( 1000 ) ( 94 )=8888

You might also like