Operation Guide

ForiSmartviewPro
Cloud IP Camera|P2P IP Camera

April, 2014
Rev1.0

Statement
If the user manual doesnt help you to resolve the problem, please contact us via our
website for technical support.

Notice
1 Installation Environment

Keep away from the places of high-temperature, heat sources and direct sunlight.

Keep away from water and if wet, cut off the power immediately.

Avoid using in a damp environment; the reference range for operation humidity is below
85%RH.

Avoid using in too hot or too cold environments, the reference range for operation
temperature is -10~ +50.

Please install it horizontally or wall mount, avoid strenuous vibration and do not place
other items on top of the unit.

2 Transport and Handling

Please handle the item with care.

Do not use in areas around condensation.

Please disconnect the item from the mains before moving.

Notice:
1.

Be careful not to damage the camera or subject it to strong impacts or shocks.

2.

Do not touch the optical components for the image sensor, such as the lens, if
necessary, please place a clean and moistened cloth with alcohol and wipe the dirt
gently; When not in use, please place the dust cover on to the item to protect the image
sensor.

3.

Do not aim the camera directly into the sun or at other intense light sources that could
affect the image quality, this will also shorten the service life for the image sensor.

4.

Keep away from laser when it is working, otherwise the image sensor can be damaged.

5.

If the equipment is not working properly, please contact the store or the service centre,
do not disassemble or modify the equipment in any way.

Index
1. iSmartViewPro Summary............................................................................................................4
2. Required computer......................................................................................................................4
3. Installing iSmartViewPro.............................................................................................................5
4. iSmartViewPro Application.........................................................................................................5
5. Device list menu...........................................................................................................................6
5.1. Add device........................................................................................................................6
5.1.1. Search to add device in LAN...............................................................................6
5.1.2. Add device manually.............................................................................................7
5.2. Edit Device.........................................................................................................................7
5.3. Delete device.....................................................................................................................8
5.4. Device right-click Menu....................................................................................................8
6. View Video and video setting menu..........................................................................................9
6.1. Play Video..........................................................................................................................9
6.2. Audio&Video/Image parameters/PTZ control............................................................10
7. Local Menu..................................................................................................................................10
7.1. System Setting................................................................................................................11
7.1.1. Trigger alarm........................................................................................................11
7.1.2. Play automatically after launching the software.............................................11
7.1.3. Default Record Plan............................................................................................11
8. Operation Log and Alarm Management.................................................................................12
9. Play back recording and inquire recording file......................................................................13

1.

iSmartViewPro Summary

iSmartViewPro is a Cloud IP camera centralization management software provided by

the manufacturer. It provides the central control of monitoring, video capture, record,
alarm detection, etc for multiple IP cameras on LAN or WAN.
iSmartViewPro can be running in Windows OS.
The iSmartViewPro features:

2.

Support P2P camera connection;

Support DDNS connection;

Support international language switching;

Support local scheduled recording;

Support alarm recording and snapshot;

Support monitoring and talking;

Support image setting;

Support PTZ setting;

Customized change skin.

Required computer

For using the iSmartViewPro stably,your computer should meet the following
configuration,recommend minimum computer configuration

CPU:Dual core CPU

RAM: above 1G

Hard Disk: above 500G

OS:Windows XP or above

Monitor resolution:1024*768

3.

Installing iSmartViewPro

Obtain iSmartViewPro installation software:

Obtain the software from attached CD
Download the software from our website
Please create desktop shortcut icon when installing the iSmartViewPro.

Desktop shortcut icon

4.

iSmartViewPro Application

Double click the iSmartViewPro desktop shortcut icon to run the iSmartViewPro, it shown
as below.

E
A
B

D
C
Figure 1
ACamera list area
BView video and video setup area
CLocal Menu setting area

DCamera operation log

ESearch bar
F System language switching functions etc

5.

Device list menu

5.1. Add device

Add device icon

Figure 2

5.1.1. Search to add device in LAN

Select Search to Add to access search interface, and then select corresponding device
type to search, fill in correct username and password in searched device and save as
Figure 3.
Tips: The device will be displayed in device list after saving.

Figure 3

5.1.2. Add device manually

Select Add device manually to access add interface, the item marked * must be filled as
Figure 4
Tips: please select correct Device Type when you add camera.

Figure 4

5.2. Edit Device

Edit Device icon

Select the camera added in device list, click Edit Device button to set up user
management parameters as Figure 5.

Figure 5

5.3. Delete device

Delete Device icon

Select the camera added in device list, click Delete Device button to delete the device.

5.4. Device right-click Menu

Select the camera added in device list, right click it, it will pop up Right-click Menu as
Figure 6.

Figure 6
Query Log: query operation log and alarm log of the camera, same as section 8;
Set Plan: You can perform single camera recording plan after adding recording plan.
(need to add default record plan in system setting, then you set up it, detail see section
7.1.3);
Edit Device: the function same as 5.2 Edit Device;
Local Property: view information of selected device as Figure 7

Figure 7
Tips: Right click any here, it will pop up a menu as Figure 8 when you dont select any
camera, then you can use one key to perform all operation.

Figure 8

6.

View Video and video setting menu

6.1. Play Video

Select the camera you want to play in device list, right click Play Video or double click to
play the video as Figure 9.

Figure 9

6.2. Audio&Video/Image parameters/PTZ control

You can perform monitoring, talking, snapshot, record, image parameter setting and PTZ
control etc when viewing video.
Talking button;
monitoring button;
Snapshot button;
Record and status display (two mode:
indicate record manually, indicate
scheduled record);
Image Parameters Setting button, the setting of image parameters may be different
due to camera model or series as Figure 10.

Figure 10
PTZ control button

Up, Down, Left, Right, cruise vertically, horizontally and center.

7.

Local Menu
Play all device in device list
Close all device in device list
Eyeplayer
Multiple image window option
Mange device Log
Full screen mode
System Setting

7.1. System Setting

System Setting icon

You can set up snapshot, alarm recording, recording save path, play automatically after
reboot and recording plan here as Figure 11.

Figure 11

7.1.1. Trigger alarm

It supports snapshot, alarm recording and alarm voice prompt
Tips: You
need to set up motion detection and the trigger alarm of camera website, so it will be
performed trigger alarm.

7.1.2. Play automatically after launching the software

Ticked Play automatically after reboot, it will connect automatically and play the
cameras in device list after reboot the software.

7.1.3. Default Record Plan

You need to create recording plan to set up it when you use local record plan; record
status indicate as
record manually,
record plan, shown as Figure 12.

Figure 12
Tips: You need to select record property when creating record plan, consider if cover the
recording or stop recording after the space is full, shown as Figure 13

Figure 13

8.

Operation Log and Alarm Management

Device log and alarm manage log icon

You can query work log and alarm log for a camera, example for, what time is it played
video, what time is it closed video as Figure 14.

Figure 14

9.

Play back recording and inquire recording file

Play back recording and inquire recording file icon

Launch Eyeplayer, the user can check recording file of each camera by recording path as
Figure 15

Figure 15