Scribd
Upload
82 views

Roof Slab A-C 1-2

The document appears to be engineering calculations for the design of a roof slab (ROOF SLAB) for a project called LABOHAN DAGANG PAKEJ D - DECANTER. It includes calculations of bending moments, required and provided reinforcement areas, reinforcement spacing checks, and indicates the calculations were performed by SYAMSUL on 01-Oct-16. The calculations reference design standards and consider parameters such as concrete strength, reinforcement properties, loading conditions, and code factors.

Uploaded by

Mohamad Syamsul Hizham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
82 views

Roof Slab A-C 1-2

The document appears to be engineering calculations for the design of a roof slab (ROOF SLAB) for a project called LABOHAN DAGANG PAKEJ D - DECANTER. It includes calculations of bending moments, required and provided reinforcement areas, reinforcement spacing checks, and indicates the calculations were performed by SYAMSUL on 01-Oct-16. The calculations reference design standards and consider parameters such as concrete strength, reinforcement properties, loading conditions, and code factors.

Uploaded by

Mohamad Syamsul Hizham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 8

Project

Job Ref.

LABOHAN DAGANG PAKEJ D - DECANTER


Jurutera Perunding Zaaba Sdn. Bhd

Section

Sheet no./rev.

ROOF SLAB

Calc. by

Date

SYAMSUL

01-Oct-16

Chk'd by

Date

App'd by

Date

Project

Job Ref.

LABOHAN DAGANG PAKEJ D - DECANTER


Jurutera Perunding Zaaba Sdn. Bhd

Section

Sheet no./rev.

ROOF SLAB

Calc. by

Date

SYAMSUL

01-Oct-16

Chk'd by

Date

App'd by

Date

Project

Job Ref.

LABOHAN DAGANG PAKEJ D - DECANTER


Jurutera Perunding Zaaba Sdn. Bhd

Section

Sheet no./rev.

ROOF SLAB

Calc. by

Date

SYAMSUL

01-Oct-16

Chk'd by

Date

App'd by

Date

Project

Job Ref.

LABOHAN DAGANG PAKEJ D - DECANTER


Jurutera Perunding Zaaba Sdn. Bhd

Section

Sheet no./rev.

ROOF SLAB

Calc. by

Date

SYAMSUL

01-Oct-16

Chk'd by

Date

App'd by

Date

Project

Job Ref.

LABOHAN DAGANG PAKEJ D - DECANTER


Jurutera Perunding Zaaba Sdn. Bhd

Section

Sheet no./rev.

ROOF SLAB

Calc. by

Date

SYAMSUL

01-Oct-16

Chk'd by

Date

App'd by

Date

Project

Job Ref.

LABOHAN DAGANG PAKEJ D - DECANTER


Jurutera Perunding Zaaba Sdn. Bhd

Section

Sheet no./rev.

ROOF SLAB

Calc. by

Date

SYAMSUL

01-Oct-16

Chk'd by

Date

App'd by

Date

RC slab designIn accordance with EN1992-1-1:2004 incorporating corrigendum January


2008 and the recommended valuesTedds calculation version 1.0.11Library item: Calc title
Library item - Show active sketchSlab definitionSlab reference name;

ROOF SLAB A-

C/1-2Type of slab;

Two way spanning with restrained edgesOverall slab

depth;

h = 200 mmShorter effective span of panel;

7000 mmLonger effective span of panel;


conditions;

lx =

ly = 12000 mmSupport

Three edges discontinuous (one long edge

continuous)Top outer layer of reinforcement;

Short span directionBottom

outer layer of reinforcement;

Short span directionLoadingCharacteristic permanent

action;

Gk = 7.1 kN/m2Characteristic variable action;

= 1.5 kN/m2Partial factor for permanent action;

Qk

gG = 1.35Partial factor for

variable action;

Q = 1.50Quasi-permanent value of variable action;

y2 = 0.30Design ultimate load;

q = G Gk + gQ Qk = 11.8 kN/m2Quasi-

permanent load;

qSLS = 1.0 Gk + 2 Qk = 7.5 kN/m2Library item

- Slab definition 2 wayConcrete propertiesConcrete strength class;


cylinder strength;

C40/50Characteristic

fck = 40 N/mm2Partial factor (Table 2.1N); C =

1.50Compressive strength factor (cl. 3.1.6);

acc = 1.00Design

compressive strength (cl. 3.1.6);

fcd = 26.7 N/mm2Mean axial tensile strength (Table

3.1);

fctm = 0.30 N/mm2 (fck / 1 N/mm2)2/3 = 3.5

N/mm2Maximum aggregate size;

dg = 20 mmReinforcement propertiesCharacteristic

yield strength;

fyk = 500 N/mm2Partial factor (Table 2.1N);

= 1.15Design yield strength (fig. 3.8);

fyd = fyk / gS = 434.8

N/mm2Library item - Material propertiesConcrete cover to reinforcementNominal cover to


outer top reinforcement;

cnom_t = 25 mmNominal cover to outer bottom

reinforcement;

cnom_b = 25 mmFire resistance period to top of slab;

Rtop = 60 minFire resistance period to bottom of slab;

Rbtm = 60 minAxia distance

to top reinft (Table 5.8);

afi_t = 15 mmAxia distance to bottom reinft (Table

5.8);

afi_b = 15 mmMin. top cover requirement with regard

to bond;

cmin,b_t = 10 mmMin. btm cover requirement with

regard to bond;

cmin,b_b = 10 mmReinforcement fabrication;

ject to QA systemCover allowance for deviation;

Sub

Dcdev = 5 mmMin. required

nominal cover to top reinft;

cnom_t_min = 15.0 mmMin. required nominal cover

to bottom reinft;

cnom_b_min = 15.0 mmPASS - There is sufficient

cover to the top reinforcementPASS - There is sufficient cover to the bottom


reinforcementLibrary item - Cover 2 way T BReinforcement design at midspan in short span
direction (cl.6.1)Bending moment coefficient;
bending moment;

sx_p = 0.0681Design

Mx_p = bsx_p q lx2 = 39.4 kNm/mLibrary item -

Project

Job Ref.

LABOHAN DAGANG PAKEJ D - DECANTER


Jurutera Perunding Zaaba Sdn. Bhd

Section

Sheet no./rev.

ROOF SLAB

Calc. by

Date

SYAMSUL

01-Oct-16

Chk'd by

Design mt 2 way restrainedReinforcement provided;

Date

App'd by

Date

10 mm dia. bars at 125 mm

centresArea provided;

Asx_p = 628 mm2/mEffective depth to tension

reinforcement;

dx_p = h - cnom_b - fx_p / 2 = 170.0 mmK factor; K =

Mx_p / (b dx_p2 fck) = 0.034Redistribution ratio;

d = 1.0K factor; K = 0.598

d - 0.18 d2 - 0.21 = 0.208K < K' - Compression reinforcement is not requiredLibrary item
- K factorLever arm;

z = min(0.95 dx_p, dx_p/2 (1 + (1 - 3.53 K)0.5))

= 161.5 mmArea of reinforcement required for bending;

Asx_p_m = Mx_p / (fyd z)

= 561 mm2/mMinimum area of reinforcement required;

Asx_p_min = max(0.26

(fctm/fyk) b dx_p, 0.0013bdx_p) = 310 mm2/mArea of reinforcement required;


Asx_p_req = max(Asx_p_m, Asx_p_min) = 561 mm2/mAscx_p_req = 0 mm2/mLibrary item As no comp reinftPASS - Area of reinforcement provided exceeds area requiredLibrary item Pass/fail bending outputCheck reinforcement spacingReinforcement service stress;

x_p = (fyk / gS) min((Asx_p_m/Asx_p), 1.0) qSLS / q = 247.8 N/mm2Library item Service stressMaximum allowable spacing (Table 7.3N);
bar spacing;

smax_x_p = 190 mmActual

sx_p = 125 mmStatusSpacing = if(smax_x_p>=

sx_p,Pass,Fail) = "Pass"PASS - The reinforcement spacing is acceptableLibrary item Output max bar spacingReinforcement design at midspan in long span direction
(cl.6.1)Bending moment coefficient; sy_p = 0.0440Design bending moment;

My_p =

bsy_p q lx2 = 25.5 kNm/mLibrary item - Design mt 2 way restrainedReinforcement


provided;

10 mm dia. bars at 150 mm centresArea provided;

Asy_p = 524 mm2/mEffective depth to tension reinforcement; dy_p = h - cnom_b - fx_p y_p / 2 = 160.0 mmK factor;

K = My_p / (b dy_p2 fck) = 0.025Redistribution

ratio;

= 1.0K factor;

K = 0.598 - 0.18

2 - 0.21 = 0.208K < K' - Compression reinforcement is not requiredLibrary item - K


factorLever arm;

z = min(0.95 dy_p, dy_p/2 (1 + (1 - 3.53K)0.5)) =

152.0 mmArea of reinforcement required for bending;

Asy_p_m = My_p / (fyd z)

= 385 mm2/mMinimum area of reinforcement required;

Asy_p_min = max(0.26

(fctm/fyk) b dy_p, 0.0013bdy_p) = 292 mm2/mArea of reinforcement required;

Asy

_p_req = max(Asy_p_m, Asy_p_min) = 385 mm2/mAscy_p_req = 0 mm2/mLibrary item - As


no comp reinftPASS - Area of reinforcement provided exceeds area requiredLibrary item Pass/fail bending outputCheck reinforcement spacingReinforcement service stress;

ssy

_p = (fyk / S) min((Asy_p_m/Asy_p), 1.0) qSLS / q = 204.0 N/mm2Library item Service stressMaximum allowable spacing (Table 7.3N);
bar spacing;

smax_y_p = 245 mmActual

sy_p = 150 mmStatusSpacing = if(smax_y_p>=

sy_p,Pass,Fail) = "Pass"PASS - The reinforcement spacing is acceptableLibrary item Output max bar spacingReinforcement design at continuous support in short span direction
(cl.6.1)Bending moment coefficient; bsx_n = 0.0909Design bending moment;

Mx_n =

sx_n q lx2 = 52.6 kNm/mLibrary item - Design mt 2 way restrainedReinforcement

Project

Job Ref.

LABOHAN DAGANG PAKEJ D - DECANTER


Jurutera Perunding Zaaba Sdn. Bhd

Section

Sheet no./rev.

ROOF SLAB

Calc. by

Date

SYAMSUL

01-Oct-16

Chk'd by

Date

App'd by

Date

You might also like