Scribd
Upload
104 views

Chapter 5.4 - Exercise Beam PDF

This document provides information and requirements for designing two beams in a shop office plan. It includes a diagram of the floor plan layout showing beams and dimensions. Data is given for the concrete grade, rebar yield strength, column and beam sizes, slab and wall properties, and loadings. The tasks are to 1) design beam 1a/A-B and verify deflection and cracking, and 2) design beam A/1-2 and verify deflection and cracking. A second diagram is given showing a continuous beam layout, along with data to design beam 2/A-D.

Uploaded by

fhatiha atika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views

Chapter 5.4 - Exercise Beam PDF

This document provides information and requirements for designing two beams in a shop office plan. It includes a diagram of the floor plan layout showing beams and dimensions. Data is given for the concrete grade, rebar yield strength, column and beam sizes, slab and wall properties, and loadings. The tasks are to 1) design beam 1a/A-B and verify deflection and cracking, and 2) design beam A/1-2 and verify deflection and cracking. A second diagram is given showing a continuous beam layout, along with data to design beam 2/A-D.

Uploaded by

fhatiha atika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Exercise 5.

1
www.uthm.edu.my

Figure 5.1 shows part of a first floor shop office plan. All beams and slab
are cast simultaneously. A 3m height and 112.5mm thick brick-wall is
constructed along the perimeter of the building. Given the following
data;
-Class of concrete = C35/45, fyk=500N/mm2
-Column size=300mm300mm
-Beam size for 1a/A-B=200mm400mm, A/1-2=300mm550mm
-Slab thickness=125mm
-Gk for brickwall=2.6kN/m
- Qk=2.5kN/m2
- Finishes and services loads=1.0kN/m2
With Wisdom We Explore

Tutorial 1
www.uthm.edu.my

B
5m

4m

Figure 5.1

2m

1a

1) Design beam 1a/A-B, verify deflection and crack control for the
beam.
2) Design beam A/1-2, verify deflection and crack control for the beam
With Wisdom We Explore

Exercise 5.1
www.uthm.edu.my

The plan layout in Figure 5.2 is provided with continuous beams. Given
the data below: variable actions = 3.5kN/m2, finishing = 1.0kN/m2,
thickness of slab=125mm, size of all beams = 225mm x 450mm,
fck=25N/mm2, fyk=500N/mm2. Design beam 2/A-D.
A

B
5200

C
5200

D
5200

2500

Figure 5.2

2500

2500

With Wisdom We Explore

You might also like