Scribd
Upload
165 views2 pages

Datasheet OPCom II 10050 en

The document summarizes the OPCom II particle monitor, which continuously monitors contamination in hydraulic fluids and lubricants. It has a compact design that can monitor pressures up to 420 bar. It intuitively displays contamination levels and particle sizes. It communicates data via serial interface, CAN-Bus, or 4-20 mA output and can store data. It uses light extinction to classify particles within four size channels.

Uploaded by

Milton del Basso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
165 views2 pages

Datasheet OPCom II 10050 en

The document summarizes the OPCom II particle monitor, which continuously monitors contamination in hydraulic fluids and lubricants. It has a compact design that can monitor pressures up to 420 bar. It intuitively displays contamination levels and particle sizes. It communicates data via serial interface, CAN-Bus, or 4-20 mA output and can store data. It uses light extinction to classify particles within four size channels.

Uploaded by

Milton del Basso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Continuous

Oil Condition Monitoring


OPCom II Particle Monitor
Application area
The OPCom II is a compact particle monitor for continuous monitoring of
the contamination in hydraulic uids and lubricants.
Performance features
Recognizing changes in your hydraulic fluid
Particle monitors precisely display any change of contamination in your
system. In that way you can react quickly when an increase in particle
concentration occurs and the appropriate countermeasures can be taken.
Subsequent damages are minimized and costs are reduced.
High pressure range
The OPCom II is designed for operating with pressures of up to 420 bar.
In that way it can be mounted directly to a pressure line.

OPCom II

Intuitive operating
The OPCom II is equipped with an intensely illuminated graphic display
and a keypad by which you may set up all required adjustments. The
menu navigation is made up intuitively and logically.
Wide communication possibilities
The OPCom II exports data to a serial interface or optionally to a
CAN-Bus (CANopen). Parallel, the configurable 4 - 20 mA interface
can be connected. Over a digital alarm output you will be warned when
limits are exceeded or fallen below. Readings can run time-controlled,
manually or started and stopped over a digital input. The data can also
be stored on the integrated memory unit.
Design characteristics
On the uid side the OPCom II is equipped with two Minimess connections to connect the sensor generally in the off-line circuit to the system.
The electrical connection is installed via an 8-pole M12 x 1 circular plug.
The integrated data memory allows data recording over a longer period.
Besides all its technical functions the OPCom II scores by its compact
and optical design.

M12 x 1

M6x7

G 1/4

12

G 1/4

52,5
23,5

78

8-pole A coding (male)

Technical data
Technical data

Measuring principle
The OPCom II is an optical particle monitor which works to a so-called
light extinction principle. This means that the particles are classified within
a measuring cell with the help of a laser regarding their size and quantity.
The measured values are displayed according to ISO 4406:99 and SAE
AS 4059 respectively.
Software
A free PC-software for data recording and evaluation of the measured
values can be downloaded from our website at www.argo-hytos.com
within our download area.
Order code
OPCom II

SPCO 300-1000

Accessories

Size channels

4, 6, 14, 21 m

Display

Cleanliness classes according to


ISO 4406:99 and SAE AS 4059

Measuring range
Calibrated range
Measuring accuracy
(calibrated range)

0 ... 24 OZ
10 ... 22 OZ

Voltage

9 33 VDC

Fluid pressure

up to 420 bar (dynamic)


up to 600 bar (static)

Flow rate

50 400 ml/min

Temperature range

Oil: -10 +80 C


Ambience: -10 +60 C
Storage: -20 ... +80 C
Display readable up to +60 C

1 OZ
OZ = ordinal number

Complete data cable set,


5 m length

SCSO 100-5030

Data cable with open ends, 5 m length

SCSO 100-5020

Protection class

IP 67

Contact box for connection of a


data cable

SCSO 100-5010

Electrical connection

M12 x 1; 8-pole

Interface

USB adapter - RS232 serial

PPCO 100-5420

Power supply

SCSO 100-5080

Ethernet - RS232 gateway

SCSO 100-5100

RS-232, CANopen
Analog output 4 20 mA
configurable, digital alarm output
digital input to start and stop
readings

Display and storage device


LubMon Visu

SCSO 900-1000

Data memory

3000 data records

Operation

via keys, PC or digital I/O

Fluid compatibility

Mineral oils (e.g. HLP), ester oils


(e.g. HEES), polyalphaolefines
and biodegradable oils (e.g. HETG),
phosphate ester optionally, diesel fuels

Minimess connection with volume flow limiting


Pressure range 1: 2 50 bar
Pressure range 2: 50 400 bar

SPCO 300-5105
SPCO 300-5140

Minimess connection with control loop

SPCO 300-5100

We produce fluid power solutions


ARGO-HYTOS GMBH Industriestrae 9 76703 Kraichtal-Menzingen Germany
Phone: +49 7250 76-0 Fax: +49 7250 76-199 [email protected] www.argo-hytos.com

Subject to change
100.50-3e 0714

You might also like