Scribd
Upload
66 views

Assignment 1

1. The document contains 4 questions about gas turbine cycles. The first question asks to calculate the thermal efficiency and ratio of compressor work to turbine work for an air-standard open cycle with isentropic compression and expansion from 1 to 5.5 bar. 2. The second question asks to determine the output per kg of air, efficiency, and compressor work for a regenerative cycle operating between 1.5 to 5.2 bar with regeneration from 220 to 395°C. 3. The third question asks to compare the percentage change in network output, efficiency and exhaust temperature between sea level and 6000m altitude conditions for an aircraft gas turbine operating at a pressure ratio of 4 and 1000K temperature limit.

Uploaded by

Aniket Shingewad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views

Assignment 1

1. The document contains 4 questions about gas turbine cycles. The first question asks to calculate the thermal efficiency and ratio of compressor work to turbine work for an air-standard open cycle with isentropic compression and expansion from 1 to 5.5 bar. 2. The second question asks to determine the output per kg of air, efficiency, and compressor work for a regenerative cycle operating between 1.5 to 5.2 bar with regeneration from 220 to 395°C. 3. The third question asks to compare the percentage change in network output, efficiency and exhaust temperature between sea level and 6000m altitude conditions for an aircraft gas turbine operating at a pressure ratio of 4 and 1000K temperature limit.

Uploaded by

Aniket Shingewad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Assignment-1

1. An open cycle gas turbine plant receives air at 1 bar and 23C. The air is
compressed to 5.5 bar and reaches a maximum temperature of 700C in the
cycle. The hot air expands back to 1bar. Assuming air-standard cycle,
compute thermal efficiency of the plant if the compression and expansion
are isentropic. What is the ratio of work required to drive the compressor to
the work developed by the turbine.
2. In a regenerator gas turbine cycle, air enters the compressor at a temperature
and pressure of 30C and 1.5 bar and discharges at 220C and 5.2 bar. After
passing through the regenerator the air temperature is 395C.The
temperature of air entering and leaving the gas turbine are 900C and 510C.
Assuming no pressure drop through the regenerator, determine
(i)
The output per kg of air,
(ii) The efficiency of the cycle and
(iii) The work required to drive the compressor.
3. Compare the maximum work delivered by an aircraft gas turbine which
works in the following two atmospheric conditions (two-stage compression
with perfect intercooling, but without reheat and regeneration). Compressor
pressure ratio is 4 and metallurgical temperature limit is 1000K. At ambient
conditions: pressure = 1 atm and temperature = 28C and at 6000 m altitude:
pressure = 0.5 atm and temperature = -25C. Find the percentage change in
network output, efficiency and exhaust temperature if the volume flow rate
of air is 2.5 m3/s.
4. A closed cycle gas turbine (with reheat) power plant operates using helium
as the working medium. The pressure ratio is 10. The maximum permitted
temperature is 1000K. Assuming the work output to be maximum, calculate
the efficiency. If air is used instead of helium, calculate the efficiency and
difference in heat added. Assume ideal Brayton cycle. Temperature at the
inlet of compressor = 27C , Cp of helium = 5.204 kJ/kg K and of helium =
1.67.

You might also like