Scribd
Upload
158 views2 pages

Datasheet QS-M-75-260 Bitumen Gravel Guard

This document provides product information for a QS-M-75-260 bitumenwelding gravel guard including its drawing number, article number, EAN code, maintainer, application, system type, materials, certifications, dimensions, and spare parts. The gravel guard passed tests for EN 1253-3 with a flow rate of 16.0 l/s and a capacity test of over 30l/s. It is made of materials that are seawater resistant like aluminum coated top parts, stainless steel base plates and nuts, and EPDM gaskets.

Uploaded by

Oscar Cortes Rivero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
158 views2 pages

Datasheet QS-M-75-260 Bitumen Gravel Guard

This document provides product information for a QS-M-75-260 bitumenwelding gravel guard including its drawing number, article number, EAN code, maintainer, application, system type, materials, certifications, dimensions, and spare parts. The gravel guard passed tests for EN 1253-3 with a flow rate of 16.0 l/s and a capacity test of over 30l/s. It is made of materials that are seawater resistant like aluminum coated top parts, stainless steel base plates and nuts, and EPDM gaskets.

Uploaded by

Oscar Cortes Rivero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Datasheet

v1. 28.08.2012

Product
Drawing number
Article number
EAN Code:
Maintainer:

QS-M-75-260 bitumenwelding, gravel guard


95900343A
4029741
8712148523977
Wavin Germany

Application
System
Type

Wavin QuickStream
Roof outlet

Pictures:

Spare parts:
(1) 2* Wing Nuts with SS ring and gasket
(2) 1* Top part 260
.

(4) gravel guard


.
(6) 1* Base plate

Materials:
**all materials are seawater resistant
Top Part
Base plates/
Clamping ring
Wing nuts / screws
Gaskets

Aluminum coated
Stainless steel (passivated)
Stainless steel
EPDM (40 Shore)

Certifications/Tests:
EN 1253-3 - test report No. 7311324-01 (Date 14.06.2012)
Flow rate: 16,0 l/s (head of water:55mm)
Capacity Test according ASME A112.6.9-2005 >Capacity result: 30l/s
Salt spray test

Dimensions (QS-M-75-260 bitumenwelding):

Remark: Outlet connector not in packaging (because of different dimensions)

You might also like