Scribd
Upload
28 views

Flow1 PDF

1. The document describes the vacuum filtering process which includes a filtering trip, return trip, washing, blotting, and discharging of the filter cake. It also describes the cloth wash regeneration process to prepare the filters for continuous operation. 2. It explains that the vacuum switch valve is an important part of the vacuum belt filter machine that controls the vacuum by switching between vacuum and air channels to allow the continuous operation of the machine through filtering, return, and regeneration cycles. 3. The vacuum switch valve releases the vacuum when contacts are met during the return trip, allowing the vacuum filter plate to return to its original location and begin the next cycle.

Uploaded by

Ioana Popescu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
28 views

Flow1 PDF

1. The document describes the vacuum filtering process which includes a filtering trip, return trip, washing, blotting, and discharging of the filter cake. It also describes the cloth wash regeneration process to prepare the filters for continuous operation. 2. It explains that the vacuum switch valve is an important part of the vacuum belt filter machine that controls the vacuum by switching between vacuum and air channels to allow the continuous operation of the machine through filtering, return, and regeneration cycles. 3. The vacuum switch valve releases the vacuum when contacts are met during the return trip, allowing the vacuum filter plate to return to its original location and begin the next cycle.

Uploaded by

Ioana Popescu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

Vacuum Trip
Filtering trip beginning, pulp is uniform in filtering take, filter plate and filters synchronous forward movement, with
the pulp of filter in vacuum suction operations under the action of slurry, until the vacuum dish to metal sensors, cut off
the vacuum so far.

2. Return Trip
At this time the filter machine to continue at the same speed moved forward, and vacuum dish met contacts spacing
device, vacuum switch valve action, filter plate to immediately release the vacuum, vacuum filter plate was delayed 0.5
seconds to return to cylinder quickly dragged back to the original location, so that the cycle of be vacuum suction filter
process.

3. Washing, Blot, Discharging Slag Process


Filter the pulp with the vacuum suction filter, in order to better solution from the filter cake. Will filter cake wash, the
filter cake can small mother content to 0.1%. after washing the filter cake sucked dry area blot, filter cake content and
varies according to the material, the filter cake of washing, sucked dry by head round after radius of change and the
song filter scraper will the dissection of the unloading.

4. The Cloth Wash Regeneration


Filters is equipped with high pressure flushing device, since filters filter cake after stripping into cleaning link, to
prepare for continuous operation of equipment.

Vacuum Switch Valve Working Principle


1. Function of Vacuum Switch Valve:
Vacuum switch valve is PBF type consecutive vacuum belt type filter machine level one of important parts. Through
the vacuum switch valve two-way switch, make continuous vacuum belt type filter machine level filtrate with control
ruled out. Filters dragged to the vacuum filter plate with speed homonymous moved forward, with the pulp of filter
under the action of forces in vacuum, vacuum filter plate until met trip contacts spacing device, and the gas control
device reversing, this time the vacuum switch valve action program, turn off the vacuum channels open air channel
vacuum dish to immediately release the vacuum and be returned back to the original starting location in drag cylinder,

You might also like