NET HORSEPOWER

21.4 kW 29 HP
OPERATING WEIGHT
3595 kg 7,909 lb

PC35MR-3
PC
35MR

COMPACT HYDRAULIC
EXCAVATOR
Photo may include optional equipment.

PC35MR-3

C O M PA C T H Y D R AU L I C E X C AVAT O R

WALK-AROUND
Operator Comfort
Performance and Versatility

Standard auxiliary hydraulics

Standard thumb mounting bracket
Three track options: Rubber, steel, roadliner
Automatic two-speed travel
ISO/SAE pattern change valve
Optional Power Angle blade

Service and Maintenance

Wide opening engine hood and side covers
Side-by-side radiator and oil cooler are
easily inspected
Grease points for work equipment are on
the same side of the boom and arm
Tilt-forward operators station provides
full access to engine and hydraulic
components
Hydraulic hoses are alpha-numerically
marked or color coded making them
easy to identify

KOMTRAX equipped machines can send location, SMR and

operation maps to a secure website utilizing wireless technology.

Large operator platform

Adjustable suspension seat with
retractable seat belt
Pilot proportional joystick controls
Easy entry and egress
Low noise

C O M PA C T H Y D R AU L I C E X C AVAT O R

PC35MR-3
NET HORSEPOWER
21.4 kW 29 HP
OPERATING WEIGHT
3595 kg 7,909 lb
DIG DEPTH
3455 mm 11'4"

Value, Durability, and Strength

KOMTRAX wireless equipment monitoring system

High strength X-track frame
Castings are used for boom foot, tip, and swing yoke
Large diameter swing pin
Reinforced arm
O-ring face seal hydraulic fittings
Moisture/dust resistant electrical connectors

Peace of Mind

Two-post ROPS canopy or ROPS cab

Neutral engine start system
Excellent visibility enhances job site awareness
Low emission Komatsu engine with dual element
air cleaner
One key operates the ignition and all machine locks

Photos may include optional equipment.

PC35MR-3

C O M PA C T H Y D R AU L I C E X C AVAT O R

OPERATOR ENVIRONMENT

Operator Station
Spacious canopy/cab with unobstructed floor provides
the operator with ample leg room
Folding travel pedals
Upper rail sliding door (cab models)
Air conditioning provides a comfortable operating space
throughout the year (cab models)
Two-post ROPS canopy provides unequalled visibility
Fully adjustable suspension seat reduces operator fatigue
PPC joystick controls are low effort and provide fine control
Gauges and indicator lights are easy to read

C O M PA C T H Y D R AU L I C E X C AVAT O R

PC35MR-3

FEATURES

Tight Tail Swing

Pattern Change Valve

Excellent Visibility

The operator can focus more on the

work in front and worry less about rear
swing clearance, even in confined
areas with only an 80 mm 3.1"
projection over the tracks.

Whether you are comfortable with ISO

or SAE, you can easily change from
one to the other.

The operators station design allows

the operator to maintain a 360 fieldof-view.

Wide opening

Tilt-Up Operator Compartment

Wide Opening Engine Hood and

Side Covers

High Strength X-Track Frame

The operator compartment tilts

forward for easy access to hydraulic
and engine components.

Allow easy access for daily checks

and regular maintenance.

Neutral Engine Start System

Manual Selector Valve

Large Diameter Swing Pin

Locks out drives and hydraulics during

machine start up.

Allows the operator to switch between

one-way (Breaker) and two-way
auxiliary hydraulic flow (Thumb).

Has high durability and maintains

suitable clearances between pin and
bushing after long-term operation.

Extended Maintenance Intervals

Three Track Options Available

Lubricate swing circle

500 hrs

Lubricate work equipment

500 hrs

Replace engine oil and filter

500 hrs

Fuel filter

500 hrs

Hydraulic filter

1000 hrs

Rubber

Steel

X-track frame is a large hydraulic

excavator concept and deters the buildup of dirt and debris, saving the
operator valuable time when cleaning
the machine.

Roadliner
5

PC35MR-3

C O M PA C T H Y D R AU L I C E X C AVAT O R

SPECIFICATIONS
ENGINE
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu 3D88E-6
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct injection
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.64 ltr 100 in3
Horsepower:
Net (ISO 9249/SAE J1349) . . . . . . . . 21.4 kW 29 HP @ 2400 rpm

DRIVES AND BRAKES

Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hydrostatic
Type of travel brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hydraulic lock
Type of travel shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Rubber

UNDERCARRIAGE
ELECTRICAL SYSTEM
Operating voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Ah
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 A
Starter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 kW

HYDRAULIC SYSTEM
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HydrauMind
Main pump:
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Variable displacement x 2
Gear x 1
Maximum oil flow . . . . . . . . . . . . . . . . . . . . . . . 36.1 x 2 + 19.8 ltr/min
9.5 x 2 + 5.2 gal/min
Hydraulic motor:
Travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Variable displacement x 2
Swing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fixed displacement x 1
Maximum pressure setting . . . . . . . . . . . . . . . . . 265 kg/cm2 3,770 psi
Auxiliary flow . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 ltr/min 18.5 gal/min

Adjustment of the track tension . . . . . . . . . . . . . . . . . . . . Grease gun

Number of carrier rollers (each side) . . . . . . . . . . . . . . . . . . . . . . . . 1
Number of track rollers (each side) . . . . . . . . . . . . . . . . . . . . . . . . . . 4

REFILL CAPACITIES
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 ltr 11.6 U.S. gal
Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ltr 3.7 U.S. gal
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.7 ltr 1.8 U.S. gal
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 ltr 0.9 U.S. gal

OPERATING WEIGHT

(APPROXIMATE)

Operating weight
(with ROPS canopy and rubber shoe) . . . . . . . . . . 3595 kg 7,909 lb

BLADE
Width x height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1740 x 355 mm
5'9" x 1'2"

PERFORMANCE
Travel speed
High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 km/hr 3.0 mph
Low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8 km/hr 1.7 mph
Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.0 rpm
Ground pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 0.36 kg/cm2 5.1 psi
Max. drawbar pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3400 kg 7,500 lb
Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Bucket digging force (ISO) . . . . . . . . . . . . . . . . . . . . . 3050 kg 6,725 lb
Arm crowd force (ISO) . . . . . . . . . . . . . . . . . . . . . . . .1670 kg 3,682 lb

C O M PA C T H Y D R AU L I C E X C AVAT O R

PC35MR-3

DIMENSIONS

A
D

B
C
D
E
F
G
H/I

4905 mm 16'1"
1740 mm 5'9"
2520 mm 8'3"
950 mm 3'1"
2105 mm 6'11"
1440 mm 4'9"
300 mm 11.8"
Left 75/Right 50

Overall length
Overall width
Overall height
Tail swing radius
Crawler length
Track gauge
Track shoe width
Boom swing angle

J/K Bucket offset

LH 580 mm/RH 770 mm

LH 1'11"/RH 2'6"

F
B

WORKING RANGE
a
b
c
d
e
f
g

Maximum digging height

Maximum dumping height
Maximum digging depth
Maximum vertical digging depth
Maximum digging reach
Maximum reachground level
Minimum swing radius
(With boom swing)
h Maximum blade lift
i Maximum blade depth

a
b

17'3"
12'5"
11'4"
10'3"
18'6"
18'1"
7'0"
5'7")
1'2"
1'3"

c
d

f
e

5270 mm
3790 mm
3455 mm
3120 mm
5640 mm
5520 mm
2140 mm
(1710 mm
360 mm
390 mm

LIFTING CAPACITY

Blade on ground

Unit: kgf lbf

2 m 6.5'

Arm Length
1720 mm 5'7"

3 m 10'
2 m 6.5'
1 m 3.25'
0 m 0'
-1 m -3.25'

Front

2735* 6030*
2470* 5445*

Side

1085 2392
1090 2403

3.0 m 10'
Front

795* 1753*
1165* 2568*
1390* 3064*
1370* 3020*

Side

660 1455
610 1345
575 1268
565 1246

4 m 13'
Front
595* 1312*
680* 1499*
815* 1797*
910* 2006*
880* 1940*

Side
410 904
400 882
380 838
365 805
360 794

Maximum Reach
Front
Side
615* 1356*
340 750
640* 1411*
285 628
675* 1488*
265 584
720* 1587*
275 606
770* 1698*
320 705

*Load is limited by hydraulic capacity rather than tipping. Rated loads do not exceed 87% of hydraulic capacity or 75% of tipping load.

STANDARD EQUIPMENT

Air cleaner, dual element

Automatic two-speed travel control
Auxiliary hydraulics with selector valve
Backfill blade
KOMTRAX

Pattern change valve

Rearview mirrors
Rubber track
Suspension seat with 50 mm 2" wide
retractable seat belt

Travel alarm
Travel pedals
Twopost ROPS canopy

OPTIONAL EQUIPMENT
76 mm 3" retractable seat belt
Additional work light (cab or canopy)
Cab with air conditioner, radio ready, and
12 V outlet

KUSS189-01

Power angle blade

Road liner track

2008 Komatsu America Corp.

www.KomatsuAmerica.com

Steel track
Wide variety of attachments

Printed in USA

D09(15M)C

09/08 (EV-1)

Komatsu America Corp. is an authorized licensee of Komatsu Ltd.

Materials and specifications are subject to change without notice
is a registered trademark of Komatsu Ltd., Japan
KOMTRAX is a registered trademark of Komatsu America Corp