Scribd
Upload
467 views

Safety Operation Procedure

Search Results SWPs are also referred to using other terms, such as Standard Operating Procedure (SOPre) (SOP). A Safe Work Procedure is a step by step description of a process when deviation may cause a loss. This risk control document created by teams within the company describes the safest and most efficient way to perform a task.

Uploaded by

Abid Hasan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
467 views

Safety Operation Procedure

Search Results SWPs are also referred to using other terms, such as Standard Operating Procedure (SOPre) (SOP). A Safe Work Procedure is a step by step description of a process when deviation may cause a loss. This risk control document created by teams within the company describes the safest and most efficient way to perform a task.

Uploaded by

Abid Hasan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

(Your Business Name Here) Safe Work Procedure

METAL LATHE
DO NOT use this machine unless you have been instructed
in its safe use and operation and have been given permission
PERSONAL PROTECTIVE EQUIPMENT
Safety glasses must be worn at
all times in work areas.

Long and loose hair must be


contained.

Gloves must not be worn


when using this machine.

Sturdy footwear must be worn


at all times in work areas.

Close fitting/protective
clothing must be worn.

Rings and jewellery must not


be worn.

PRE-OPERATIONAL SAFETY CHECKS

DONT

Locate and ensure you are familiar with all machine

operations and controls.

Ensure all guards are fitted, secure and functional.

suspect machinery.

Do not operate if guards are missing or faulty.

Check workspaces and walkways to ensure no


slip/trip hazards are present.

Check the job is clamped tight in the chuck.


Remove all tools from the bed and slides of the

Do not use faulty equipment. Immediately report


Do not try to lift chucks or face plates that are too
heavy for you.

Never leave the machine running unattended.


Do not attempt to slow or stop the chuck or revolving
work by hand.

Do not leave equipment on top of the machine.

machine.

Ensure the correct speed for machining process is


selected.

Remove the chuck key before starting the lathe.


OPERATIONAL SAFETY CHECKS

Before making adjustments or measurements,


switch off and bring the machine to a complete
standstill.

Always remove the chuck key from the chuck.


ENDING OPERATIONS AND CLEANING UP

Switch off the machine when work completed.


Reset all guards to a fully closed position.
Avoid letting swarf build up on the tool or job. Stop
the machine and remove it.

Leave the machine in a safe, clean and tidy state.


POTENTIAL HAZARDS AND INJURIES

Flying objects such as the chuck key left in chuck.


Cutting tool injury when cleaning, filing or polishing.
Hair/clothing getting caught in moving machine
parts.

Metal splinters and swarf.


Eye injuries.

This SWP does not necessarily cover all possible hazards


associated with this equipment and should be used in
conjunction with other references. It is designed as a guide
to be used to compliment training and as a reminder to
users prior to equipment use.

This information is based on material published by the


South Australian Department of Education and Childrens
Services.

You might also like