Civil Service Academy: PAS 39 STP
Civil Service Academy: PAS 39 STP
Lecture Handout
Building Regulations are minimum standards laid down by local authorities to secure the health
and safety of people in or about buildings. They are about the design and construction of
buildings as well as the provisions of services, fittings and equipment in buildings. They are also
concerned with the conservation of fuel and power and access and facilities for people with
disabilities. Additional fire risks associated with larger buildings are also to be addressed.
2.
3.
4.
5.
6.
7.
8.
Enhance and ensure access for disabled, sick, young and old people
9.
10.
11.
Ensure sports grounds and public venues are safe for crowds
Most building control officers hold a relevant qualification, which cover a wide range of
disciplines including surveying, architecture, town planning, structural engineering, public
health and fire engineering. There are many years of experience available to call on and
officers should regularly attend training courses to ensure that they are up to date with
modern methods of construction covering structures, fire precautions, services, drainage and
where appropriate liaison with other council departments may be carried out to offer a team
approach.
Extensive records on properties should be maintained so that future owners can plan further
works with confidence. This also means that prospective purchasers can ensure that work
carried out in the past has been inspected and approved. This information can also be
analysed to give prior warning of any potential problems particularly in relation to ground
conditions which will increase the confidence of investors in the market encouraging them to
contribute in the areas economy.
The building code becomes law of a particular jurisdiction when formally enacted by the
appropriate authority. Building codes are generally intended to be applied by architects and
engineers. There are often additional codes or sections of the same building code that have
more specific requirements that apply to dwellings and special construction objects.
NESPAK (National Engineering Services Pakistan) developed a Building Code for Pakistan
in 1986. This document was however not enforced. The earlier version was based on the then
current version of Uniform Building Code.
There is no general building code applicable in all parts of the country. Karachi, which has a
relatively strong Building Control Authority, expects designs based on UBC parameters.
Most cities do not have any prescribed structural requirements. There are efforts to introduce
a wider building Code, but these are at a very early stage. Some interim measures are being
taken in the Federal Capital and earth-quake affected areas. Seismic maps have existed for a
long time. Some Building Codes exist, but none has been made part of a Federal law.
Building code also provide detailed guidelines, procedures and recommendations, about
design of various types of buildings in different conditions, choice and selection of materials
and requirements for testing and inspection. These have been formulated keeping in view the
construction materials and methods prevalent in Pakistan and the latest scientific knowledge
available in building codes worldwide. In general, the following have been used as source
documents:
American codes and standards, including the International Code Council USA (ICC)
Currently, Pakistan's design engineers are using them in their general practice.
Building by laws may contain regulations related to:
Conclusion
Building control enables the citys administration to allow development in a monitored way
that guarantees safety and public welfare through the use of building regulations. In the light
of the current energy crises and climatic changes, building control is now burdened with an
added function of promoting energy efficiency and reducing wastage. Furthermore, building
control helps in shaping and maintaining the form characteristic of any city which at many
times is cashed with enhanced tourism industry.