Scribd
Upload
100 views1 page

Corbel Design: Dolomite Batu Caves 21st April 2003 Chow It Corbel To Support The Ramp Driveway Karthe / Inez

The document provides the design calculations for a corbel to support a ramp driveway for the Dolomite Batu Caves building project. The corbel has a projection of 300mm, height of 500mm, and width of 230mm. It is designed to support an ultimate vertical load of 300kN applied at 150mm from the column face. The reinforcement consists of 2 top bars of 20mm diameter and shear links of 16mm diameter spaced at 190mm. The calculations check that the corbel satisfies code requirements for bearing stress, shear stress, development length of reinforcement, and compressive and tensile forces in the concrete and steel.

Uploaded by

Edrick Lim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
100 views1 page

Corbel Design: Dolomite Batu Caves 21st April 2003 Chow It Corbel To Support The Ramp Driveway Karthe / Inez

The document provides the design calculations for a corbel to support a ramp driveway for the Dolomite Batu Caves building project. The corbel has a projection of 300mm, height of 500mm, and width of 230mm. It is designed to support an ultimate vertical load of 300kN applied at 150mm from the column face. The reinforcement consists of 2 top bars of 20mm diameter and shear links of 16mm diameter spaced at 190mm. The calculations check that the corbel satisfies code requirements for bearing stress, shear stress, development length of reinforcement, and compressive and tensile forces in the concrete and steel.

Uploaded by

Edrick Lim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

CORBEL DESIGN

(BS8110 : Part 1 : 1997, Clause 5.2.7, Page 93-95)


(Reinforced Concrete Design To BS 8110, Simply Explained , A.H.Allen, Page 90 - 93)
(Reinforced Concrete Design, W.H.Mosley & J.H.Bungey, Fifth Edition, Page 170 - 174)
PROJECT
BUILDING
CORBEL TYPE

: Dolomite Batu Caves


:
: Corbel to support the ramp driveway

Date:
Designed By :
Checked By :

21st April 2003


Chow It
Karthe / Inez

INPUT DATA :
450
F = 300 kN
150

250
250

Column Size :
450mm
Vertical Ultimate Design Load (F) :

x
300

230mm
kN

Concrete Strength (fcu) :


Reinforcement Strength (fy) :
Load Point to Column Face (av) :
Corbel Projection (L) :
Corbel Height (h) :
Bearing length (Le) :
Corbel Width (b) :
Main Tension Bars Diameter :
Shear/Horizontal Bars Diameter :
Corbel Concrete Cover :

30
460
150
300
500
300
230
20
16
25

N/mm^2
N/mm^2
mm
mm
mm
mm
mm
mm
mm
mm

300
DESIGN CALCULATION :
Max. Bearing Stress at Surface ():
Minimum Bearing Width (b'):
Max. Allowable Shear Stress at Column Face (Vu) :
Min. Effective Depth at Column Face (d') :
Effective Depth (d) :
Shear Stress At Column Face [v = F/(b*d)] :
(BS 8110 , Clause 5.2.7.1)
av/d =
v/fcu =
[k = F/(0.9*fcu*b*av)]
k=
z/d :
z=
Depth of Neutral Axis, [(d-z)/0.45] x =
Tensile Force, [(F*av)/z]
Ft =
Strain Profile, [((d-x)/x)*0.0035] Es =
Stress in Steel, [Es*200*10^3]
fs =
= tan-1 (z/av)
Angle.
Compressive Force, [Fc = 0.45*fcu*b*0.9*x*cos]
Fc*Sin =

18
56
4.4
298
465
2.81
0.32
0.09
0.32
0.72
335
288
134
0.0022
430

N/mm^2
mm
N/mm^2
mm
mm
N/mm^2
<

kN
kN

349
343

mm^2
mm^2

100As/bd =
Vc =
Allowable Shear Stress, [Vc*(2*d/av)] =

0.59
0.56
3.49

N/mm^2
N/mm^2

Sv =
Depth over links to be provided ( 2/3 * d ) =
Minimum Area of Links , (As/2) =

1911
310
174

mm
mm
mm^2

As =
As Min. =

>
Provide

>

310
800
2T16

300

2.81

629 mm^2

N/mm^2
1900
805

2
T16
(Horizontal Links)

(Horizontal Bars to be provided within


this Depth)

Pass

kN

2
T20
(Main Bar)

Provide T16 @
Reinf. Area Provided :
Provide

2T20

Pass
Pass

[z/d = (0.5+(0.25-(1+k)*k*av^2/d^2)^0.5)/(1+k)]
mm
mm
>
286
(0.615*d) Steel Not Yielded
kN
<
150
(0.5*N) Ft =
150
<
0.00219 (Ey)
Pass
N/mm^2

65.9
329
300

[(Ft*10^3)/fs]
[((F*10^3)/2)/(0.95*460)]

(0.6*fcu)
[F/(Le*)]
[0.8*(fcu^1/2)]
[F/(Vu*b)]
[h-cover-(main bar/2)]
<
4.4
1.0

mm^2
805 mm^2

You might also like