Scribd
Upload
77 views

1N5062 (Data Sheet)

This document provides specifications for 1N5059 through 1N5062 glass passivated junction rectifier diodes. The diodes have reverse voltages ranging from 200V to 800V and a forward current rating of 1A. Key features include high temperature operation up to 175C, hermetic sealing, and meeting MIL-S-19500 standards. Electrical characteristics such as forward voltage, reverse current, and thermal resistance are provided.

Uploaded by

Dimitris Dimitriadis
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
77 views

1N5062 (Data Sheet)

This document provides specifications for 1N5059 through 1N5062 glass passivated junction rectifier diodes. The diodes have reverse voltages ranging from 200V to 800V and a forward current rating of 1A. Key features include high temperature operation up to 175C, hermetic sealing, and meeting MIL-S-19500 standards. Electrical characteristics such as forward voltage, reverse current, and thermal resistance are provided.

Uploaded by

Dimitris Dimitriadis
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

1N5059 THRU 1N5062

GLASS PASSIVATED JUNCTION RECTIFIER


Reverse Voltage - 200 to 800 Volts

Forward Current - 1. 0 Ampere

D
TE

FEATURES
High temperature metallurgically bonded
construction
1.0 Ampere operation at TA=75C
with no thermal runaway
Typical IR less than 0.1A
Hermetically sealed package
Glass passivated cavity-free junction
Capable of meeting environmental standards of
MIL-S-19500
High temperature soldering guaranteed:
350C/10 seconds 0.375 (9.5mm) lead length,
5 lbs. (2.3kg) tension

DO-204AP

TE
A
P

0.034 (0.86)
0.028 (0.71)
DIA.

1.0 (25.4)
MIN.

0.240 (6.1)
MAX.

0.150 (3.8)
0.100 (2.5)
DIA.

1.0 (25.4)
MIN.

MECHANICAL DATA
Case:JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Weight: 0.02 ounce, 0.56 gram

Dimensions in inches and (millimeters)

*Brazed-lead assembly is covered by Patent No. 3,930,306

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS


Ratings at 25C ambient temperature unless otherwise specified.

SYMBOLS

1N5059

1N5060

1N5061

1N5062

UNITS

VRRM

200

400

600

800

Volts

VRMS

140

280

420

560

Volts

* Maximum DC blocking voltage

VDC

200

400

600

800

Volts

* Maximum average forward rectified current


0.375 (9.5mm) lead length at TA=75C

I(AV)

1.0

Amp

* Peak forward surge current


8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)

IFSM

50.0

Amps

VF

1.2

Volts

* Maximum repetitive peak reverse voltage


Maximum RMS voltage

* Maximum instantaneous forward voltage at 1.0A


* Maximum full Load reverse current, full cycle
average 0.375 (9.5mm)
TA=25C
lead length at
TA=75C
* Maximum DC reverse current
TA=25C
at rated DC blocking voltage
TA=175C

5.0

IR(AV)
150
IR

A
100

5.0
300

200

Typical reverse recovery time (NOTE 1)

trr

1.5

Typical junction capacitance (NOTE 2)

CJ

15.0

pF

RJA

55.0

C/W

TJ, TSTG

-65 to +175

Typical thermal resistance (NOTE 3)


* Operating junction and storage temperature range

NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, lrr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length P.C.B. mounted
*JEDEC registered values

4/98

RATINGS AND CHARACTERISTIC CURVES 1N5059 THRU 1N5062

FIG. 2 - MAXIMUM NON-REPETITIVE PEAK


FORWARD SURGE CURRENT

FIG. 1 - FORWARD CURRENT


DERATING CURVE

50
60HZ
RESISTIVE
INDUCTIVE LOAD
0.375" (9.5mm)
LEAD LENGTH

0.8

PEAK FORWARD SURGE CURRENT,


AMPERES

AVERAGE FORWARD RECTIFIED


CURRENT, AMPERES

1.0

0.6

0.4

0.2

25

50

75

100

125

150

TJ=TJ max.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)

40

30

20

10

175

AMBIENT TEMPERATURE, C

FIG. 3 - TYPICAL INSTANTANEOUS


FORWARD CHARACTERISTICS

100

FIG. 4 - TYPICAL REVERSE CHARACTERISTICS

10

10

PULSE WIDTH=300s
1% DUTY CYCLE

TJ=150C

TJ=25C

0.1

INSTANTANEOUS REVERSE CURRENT,


MICROAMPERES

INSTANTANEOUS FORWARD CURRENT,


AMPERES

10
NUMBER OF CYCLES AT 60 HZ

TJ=125C

TJ=75C

0.1

TJ=25C

0.01
0

20

40

60

80

100

PERCENT OF RATED PEAK REVERSE VOLTAGE, %

0.01
0.4

0.6

0.8

1.0

1.2

1.4

1.6

INSTANTANEOUS FORWARD VOLTAGE,


VOLTS
FIG. 6 - MAXIMUM NON-REPETITIVE
PEAK PULSE REVERSE
AVALANCHE POWER DISSIPATION

FIG. 5 - TYPICAL JUNCTION CAPACITANCE


TJ=25C
f =1.0 MHz
Vsig=50mVp-p

10

10
REVERSE VOLTAGE, VOLTS

100

1,000
PEAK PULSE REVERSE AVALANCHE
POWER, WATTS

JUNCTION CAPACITANCE, pF

30

100

10
10

100

1,000

td, PULSE DURATION, MICROSECONDS

10,000

This datasheet has been download from:


www.datasheetcatalog.com
Datasheets for electronics components.

You might also like