Scribd
Upload
289 views4 pages

Hi 60856

The document describes ProHS81 configuration software that is used to program H-S81-HS fire panels. The software can be installed on a PC and used to configure panel components, define inputs and outputs, and set logic rules. It allows creation of configuration files that can be exported to supervision programs and panels.

Uploaded by

Mohamed Rafih
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
289 views4 pages

Hi 60856

The document describes ProHS81 configuration software that is used to program H-S81-HS fire panels. The software can be installed on a PC and used to configure panel components, define inputs and outputs, and set logic rules. It allows creation of configuration files that can be exported to supervision programs and panels.

Uploaded by

Mohamed Rafih
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ProHS81

Configuration Software

General Description
The H-S81-HS panel can be programmed using the software ProHS81.
The program, which is supplied separately from the panel, can be installed on any PC provided with either a serial port or a link for network connection with the panel to be programmed.
A USB port is also necessary for the protection key that is used to prevent tampering and unauthorized modification after testing.
ProHS81 allows the programmer to make the most effective use of panel and hardware modularity. Besides being simple to use, it utilizes video
windows including tables and selection menus consistent with both panel composition and desired functions.

Configuration Method
The H-S81-HS panel is mainly composed of one basic unit and one or more racks, where cards selected according to the type of system
installed are inserted.
Whatever its special function, each card acts as a device connecting and controlling the input (detection) and output (command) field devices.
Once they have been inserted into the racks, the cards must be configured through ProHS81 programming to define:
1.
2.
3.
4.

characteristics and inputs behavior (sensors)


characteristics and outputs behavior (actuators)
logic and temporal combinations (rules) determining which outputs are to be activated by status variations of inputs.
the assigned zone of each device (input or output) is to be defined, as well as its behavior in stand-by, alarm and fault conditions.

1) Definition of inputs
Determination of behavior and time of delay of inputs.
Physical location and addressing of devices.

2) Definition of actuators
Determination of behavior and time of delay of outputs.
Physical location and addressing of devices.

3) Definition of rules (operating logics)

It defines the status variations of inputs to determine the activating conditions of outputs.

Possible Configurations
At a general configuration level, it is possible to define:
Panel and program language
Panel display parameters
Panel heading and general information on the type of the panel
Communication method for panels, PCs and printers
Panel and supervision PCs IP addresses
CPU and cards redundancies
Time-related operation and periodical test functions
Program and configuration protection parameters.
At panel (and system) functional level, it is possible to configure:
AND, OR, N/N logic associations relevant to inputs and outputs managed by panel
Logic associations on other network-connected panels
Logic associations and events determined by time frame variations.
The logic associations can be configured for a maximum of 300 fire extinguishing zones and technologically controlled zones. Each zone can
have 99 inputs, 99 outputs, and 99 logic associations.

Data Validity Control


In addition to ancillary functions, the ProHS81 configuration
program integrates a configuration control utility able to detect
and report any syntax or consistency errors during the assignment of addresses and logic attributions.
ProHS81 is able to produce a printable page depicting the
panel composition.

Program Pack and Protection


The program is supplied on a CD and includes a USB protection key which requires, for its activation, the user's (or installer's) registration in
Honeywells database.
The protection key is necessary as it allows, in combination with the user's (or installer's) password, enabling or disabling panel configuration
transmission from and to the PC.

Program Main Characteristics

PC installation with MS Windows operating system


Protection of panel configuration with password and USB key
Connection to panel through serial port or network
Standard languages is English. Other languages and fonts upon request
Possibility to configure 300 Safety zones, with 99 sensors, 99 actuators, and 99 rules per zone
Possibility to configure 999 remote rules for interaction between panels
Table-type graphic configuration method, with guided drop-down menus and on-line help
Organization and storage in working folders with a drop-down structure
Utility for validity control of configuration data
Graphic display and print of panel configuration
Graphic display and print of composition of each loop (or bus), with indication of respective consumption
Table-type display and print of memory occupation by virtual inputs and outputs used for interaction between panels, or setup of logic and particular associations
Display and print relating to virtual points dedicated to Modbus communication
Automatic creation of configuration file to be exported to IRIDE supervision program
Automatic creation of executable program to be exported to panel (H-S81-HS)
Programming manual (available directly from program)

Page 2 of 4 1/16/2015 HI-60856

www.honeywell.com

www.honeywell.com

HI-60856 1/16/2015 Page 3 of 4

This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or
anticipate all requirements. All specifications are subject to change without notice.

Honeywell International Inc.


Industrial Fire Protection
12 Clintonville Road
Northford, CT 06472-1610

Honeywell Industrial Training Center

+1 203-484-7161

9401 Bay Area Boulevard #400

fax: +1 203-484-7118

Pasadena, TX 77507

www.honeywell.com

+1 713-577-1510

HI-60856
March 2015
2015 Honeywell International Inc.

You might also like