Scribd
Upload
113 views1 page

8 Inch Magnetic Flux Leakage Inspection Vehicle: RS 08 SA 02

This document provides specifications for an 8 inch magnetic flux leakage inspection tool. The tool can inspect pipelines with minimum internal diameters of 164mm or larger, including those with 3D bends as tight as 183mm. It is lightweight at 85kg, has high axial resolution of 2mm, and can operate from -20 to 85 degrees Celsius under pressures up to 120 bar when moving at speeds from 0.3 to 3.0 meters per second. The tool's batteries provide up to 100 hours of operation and it can inspect pipe walls up to 11.1mm thick using various mediums like gas or liquids. It is suitable for vertical launch and receive and can accurately measure and report on general and pitting corrosion depths and lengths.

Uploaded by

fadialkasrawi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views1 page

8 Inch Magnetic Flux Leakage Inspection Vehicle: RS 08 SA 02

This document provides specifications for an 8 inch magnetic flux leakage inspection tool. The tool can inspect pipelines with minimum internal diameters of 164mm or larger, including those with 3D bends as tight as 183mm. It is lightweight at 85kg, has high axial resolution of 2mm, and can operate from -20 to 85 degrees Celsius under pressures up to 120 bar when moving at speeds from 0.3 to 3.0 meters per second. The tool's batteries provide up to 100 hours of operation and it can inspect pipe walls up to 11.1mm thick using various mediums like gas or liquids. It is suitable for vertical launch and receive and can accurately measure and report on general and pitting corrosion depths and lengths.

Uploaded by

fadialkasrawi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

8 inch Magnetic Flux

Leakage Inspection Vehicle

TOOL SPECIFICATION
Tool Length
Min. ID
Min. ID in 3D Bend
Min. Bend Rad ius
Operational weight
Axial resolution (at 1 m/s)

RS 08 SA 02

OPERATING PARAMETER

1600 mm
164 mm
183 mm
3.0 D
85 kg
2 mm

Operating Temperature
Max. Pressure
Reco mmended Velocity
Batteries Life
Max Wall Th ickness
Medium

-20 to 85 C
120 Bar
0.3 to 3.0 m/sec
100 Hours
5.68 to 11.1 mm
Gas, Liquids

Note: This tool is suitable for vertical launch / receive method

REPORTING SPECIFICATION -in body of pi pe (ERW)


GEN ERAL CORROS ION

80%

M inimum Depth for Sizing Accuracy (POD 90%) - 0.1t


Depth Accuracy
Length Accuracy
Width Accuracy

0.1t
10mm
20mm

PITTING CORROS ION


M inimum Depth for Sizing Accuracy (POD 90%) - 0.1t
Depth Accuracy
Length Accuracy
Width Accuracy

0.1t
10mm
10mm

D
C
E

Launcher
A
1700
B
500
C
Pipeline ID + 2
D
Pipeline ID
E
Pipeline ID
F
150

Recei ver
A
B
C
D
E
F
No. 8 Jala n 5/91A, Ta man Sh ameli n Perka sa,
56100 Kua la Lu mpur, Mala ysi a.
Tel : +603 -9282 3434 Fax : +603 -9282 4434
E-mail : ro mstar@ro mst argro up.co m
www.rom star grou p.com

mm
mm

mm

1500
1650
Pipeline ID + 2
Pipeline ID
Pipeline ID
1300

mm
mm

mm

Towards Pipeline Integrity


Rev :4

You might also like