Scribd
Upload
34 views

Chemical Reaction Engineering (CRE) Is The

This lecture discusses selectivity and semibatch reactors in chemical reaction engineering. It defines selectivity as both the instantaneous ratio of desired to undesired reaction rates (rD/rU) and the overall ratio of amounts of desired to undesired products formed (FD/FU). Semibatch reactors are effective for maximizing selectivity as the limiting reactant is always the one initially loaded into the reactor while the other reactant is fed continuously. The lecture covers mass and mole balances, rate laws, stoichiometry, and equilibrium conversions for elementary reactions in semibatch reactors.

Uploaded by

deepak pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views

Chemical Reaction Engineering (CRE) Is The

This lecture discusses selectivity and semibatch reactors in chemical reaction engineering. It defines selectivity as both the instantaneous ratio of desired to undesired reaction rates (rD/rU) and the overall ratio of amounts of desired to undesired products formed (FD/FU). Semibatch reactors are effective for maximizing selectivity as the limiting reactant is always the one initially loaded into the reactor while the other reactant is fed continuously. The lecture covers mass and mole balances, rate laws, stoichiometry, and equilibrium conversions for elementary reactions in semibatch reactors.

Uploaded by

deepak pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

Lecture 10

Chemical Reaction Engineering (CRE) is the


field that studies the rates and mechanisms of
chemical reactions and the design of the reactors in
which they take place.

Todays lecture
Definition of Selectivety
Instantaneous SD/U = rD/rU
Overall = FD/FU

Semibatch Reactors

Selectivity in Multiple Reactions

Selectivity
Instantaneous SD/U = rD/rU
Overall

D/U = FD/FU

Keep CA high and CB low.

Yield

Semibatch reactors
Semi Batch reactors can be very effective in maximizing

selectivity in liquid phase reactions.


The reactant that starts in the reactor is always the limiting
reactant.

Semibatch reactors
Semibatch reactors
A+BC+D
B, v0

Initial V

Liquid level and volume increase


5

Semibatch reactors
Mass Balance:

Semibatch
1) Mole balances:
Species A:
in out + gen = acc

Semibatch
1) Mole balances:
Species B:

Semibatch

Semibatch
2) Rate Law:
3) Stoichiometry:

10

4) Parameters:

Semibatch Example
B, v0

CO2

example: A + B C + D + CO2
1a) Mole balances:

11

Semibatch Example
1 b) Mass balances:

2) Rate Law:
12

Semibatch Example
3) Stoich:

4) Parameters:
13

Polymath Screenshots:

14

Semi Batch Reactors


Three Forms of the Mole Balance applied to Semi Batch Reactors:
1. Molar Basis

2. Concentration
Basis

3. Conversion
15

Consider the following elementary reaction:


A+B C+D
-rA=kCACB
The combined Mole Balance, Rate Law, and Stoichiometry
may be written in terms of number of moles, conversion,
and/or concentration:
Conversion

16

Concentration

No. of Moles

Polymath Equations:

17

Equilibrium Conversion in Semibatch


Reactors with Reversible Reactions
Consider the following reaction:

A+BC+D
Everything is the same as for the irreversible case, except for the
rate law:

18

Equilibrium Conversion in Semibatch


Reactors with Reversible Reactions
Where:

At equilibrium,

19

Xe changes with time.

then

End of Lecture 10

20

You might also like