Scribd
Upload
210 views

Midterm Machine Design

machine design midterm solution

Uploaded by

Mohammad Tahir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
210 views

Midterm Machine Design

machine design midterm solution

Uploaded by

Mohammad Tahir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 6
| College of Engineering & Computer Science | Department of Mechanical Engineering stu MEC-430 Machine Design Time allowed: 75 minutes March 26, 2014 Please Note: * Examination s open book, but ONLY one text book and your notes are allowed. You may use any non-communicating caleulator. No electroni * Make sure your name and studént number is written on the question sheet. Answer questions in allocated areas. You ‘may use the back of the page if necessary. [Il] The figure shows a shaft carrying a gear with diameter D with 3 forces; P,, P:and P, as shown. Identify the forces on the shaft in the two planes, xy and xz. Identify possible reactions at the bearings assuming that the bearing at point-A is a combined roller and thrust bearing. Assume that the torque is transmitted through the shaft from the left side of bearing-A and draw the NFD, SFD, BMD, TD. @5 Points) !

You might also like