80 KW Perkins Diesel Generator - TP-P80-T3-60-UL
80 KW Perkins Diesel Generator - TP-P80-T3-60-UL
POWERED by
MODEL
TP-P80-T3-60-UL
Standby
Prime
kVA
kW
kVA
kW
100
80
90
70
Standby : Continuous running at variable load for duration of an emergency. No overload is permitted on these ratings. In accordance with ISO 3046 .
Prime : Continuous running at variable load for unlimited periods with 10% overload available for 1 hour in any 12 hour period. In accordance with ISO 8528,
ISO 3046.
ENGINE INFORMATION
ENGINE MAKE
Model
PERKINS
1104D-E44TAG1
Engine Speed
RPM
1800
Tier 3
Tier Rating
Engine Power Output at
rated rpm
kWm
96.8
HP
129.8
Cooling
Radiator Cooled
Aspiration
Total Displacement
Liter
4-inline
mm x mm
105 x 127
Compression Ratio
16.2:1
Governor
Fuel Consumption (L/hr)
Electronic
Full Load
23.7
75% Load
18.7
50% Load
13.5
Liter
Optional
Oil Capacity
Liter
Coolant Capacity
Liter
17
m/min
182
Reliable Power
Developed and tested using the latest engineering
techniques and finite element analysis for high
reliability, low oil usage and low wear rates.
High compression ratios ensure clean rapid starting
in all conditions.
Product Support
Total worldwide service is provided through a
network of 4,000 distributors and dealers.
Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
All photos are representative and may not reflect exact model
CONTROLLER INFORMATION
DEEP SEA MODEL 7320
The DSE7320 is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set
applications. A sophisticated module monitoring an extensive number of engine parameters, the DSE73xx will annunciate
warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED, remote PC, audible alarm
and via SMS text alerts. The module includes RS232, RS485 & Ethernet ports as well as dedicated terminals for system
expansion.
Configurable inputs (11)
MAIN FEATURES:
Fuel usage monitor and low fuel alarms
Configurable outputs (8)
Charge alternator failure alarm
Voltage measurement
Manual speed control (on compatible CAN
Mains (utility) failure detection
Dedicated load test button
kW overload alarms
Comprehensive electrical protection
RS232, RS485 & Ethernet remote
communications
Modbus RTU/TCP
PLC functionality
Multi event exercise timer
Back-lit LCD 4-line text display
Multiple display languages
Automatic start/Manual start
Audible alarm
Fixed and flexible LED indicators
Event log (250)
Engine protection
Fault condition notification to a designated PC
Font panel mounting
Protected front panel programming
Configurable alarms and timers
Configurable start and stop timers
Five key menu navigation
Front panel editing with PIN protection
3 configurable maintenance alarms
CAN and Magnetic Pick-up/Alt. sensing
engines)
Manual fuel pump control
Protections disabled feature
Reverse power protection
Power monitoring (kW h, kV Ar, kV A h, kV Ar
h)
Load switching (load shedding and dummy load
outputs)
Automatic load transfer
Unbalanced load protection
Independent Earth Fault trip
Fully configurable via DSE
Configuration Suite PC software
Configurable display languages
Remote SCADA monitoring via
DSE Configuration Suite PC
software
Advanced SMS messaging
(additional external modem required)
Start & stop capability via SMS messaging
Additional display screens to help with modem
diagnostics
DSENet expansion compatible
Integral PLC editor
BENEFITS
OPERATION
The module is operated using the front STOP/RESET, MANUAL, AUTO, TEST and START
pushbuttons. An additional pushbutton next to the LCD display is used to scroll through the
modules metering displays.
Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
All photos are representative and may not reflect exact model
ALTERNATOR INFORMATION
Manufacturer
Stamford
Design
Stator
2/3 pitch
Rotor
Insulation System
Class H
Exciter Type
Self Excited
Phase Rotation
Alternator Cooling
<2%
STANDARD ITEMS
Mainline Circuit Breaker
Generator Set mounted on Heavy Duty Steel Base Frame
Anti-Vibration Pads between Engine/Alternator and Frame
Forklift Pockets within Base Frame (up to 400 kW)
Battery Charging Alternator
OPTIONAL ITEMS
ENGINE OPTIONS
ALTERNATOR
OPTIONS
OTHER OPTIONS
Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
All photos are representative and may not reflect exact model
In
lb
Inquire
Inquire
In
lb
Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
All photos are representative and may not reflect exact model