0% found this document useful (0 votes)
34 views4 pages

Reinforcement - Piling

This document provides information and calculations for the reinforcement design of a concrete column. It includes the column size, concrete cover, grades of concrete and steel, imposed load, pile size and number, dimensions of a pipe cap, bar size, and calculations for ultimate load per pile, moment of inertia, required steel area, and shear checks in the y-y and x-x directions. The design meets requirements for steel area, shear capacity, and development length.

Uploaded by

Abdul Karim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
34 views4 pages

Reinforcement - Piling

This document provides information and calculations for the reinforcement design of a concrete column. It includes the column size, concrete cover, grades of concrete and steel, imposed load, pile size and number, dimensions of a pipe cap, bar size, and calculations for ultimate load per pile, moment of inertia, required steel area, and shear checks in the y-y and x-x directions. The design meets requirements for steel area, shear capacity, and development length.

Uploaded by

Abdul Karim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

REINFORCEMENT CONCRETE

INFORMATION : DESIGN
Column Size =
Concrete Cover =
Concrete Grade, fcu
Steel Grade, fy
Column Imposed load
RC Pile Size
Number of pile, n
Dimension of pipe cap
Bar Size

450
x
75 mm
35 N/mm^2
460 N/mm^2
1706 kN
1000
x
20
18600
x
30 mm

450 mm^2

1000 mm^2
15600

CALCULATION :
Ultimate load from each pile
d=
2410 mm
b=
15600 mm

85.3 kN

No of row
No of column

4
5
y-y axis

y=
x-x axis

x=

6m

a) At y-y Direction
Myy =
d=

1970.43 kNm
2410 mm

K=
0.000621347 <
0.156 OK
Z=
0.999309137 d
>0.95d
Z must not greater than 0.95 d, therefore
Z=
2289.5 mm
As=
1969.42264 mm^2
Use

As actual= 2828.571429 mm^2>

30
1969.423 OK

4.5

b) At X-X direction
Mxx=
d=

1823.2875 kNm
2380 mm

K=
0.000589534 <
0.156 OK
Z=
0.999344533 d
.0.95d
Z must not greater than 0.95 d, therefore
Z=
2261 mm
As
1845.326231 mm^2
Use
4
T
30
As actual= 2828.571429 mm^2

>

1845.326 mm^2

Shear Check:
Maximun shear at perimeter column
V
0.78621156 N/mm^2
Compared with 0.8 fu=

4.732864 N/mm^2 >

0.786212

Normal Shear
At y-y direction :
V=
3940.86 kN
v=
0.104821258 N/mm^2
100As/byd=
0.007524
Vc=
0.080343035 N/mm^2
av=
8775 mm
2d/av=

0.549287749 N/mm^2 >v=

0.104821 OK

At x-x axis
V=
3646.575 kN
v=
0.098216306 N/mm^2
100As/byd=
0.007618
Vc=
0.080928871 N/mm^2
av=
11775 mm
2d/av=

0.404246285 >

v=

0.098216 OK

NCRETE

2500 mm^3

OK

OK

You might also like