MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS

SECTION
MECHANICAL TEST DATA - UNC - UNF
XX

INFORMATION

Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2
All test performed per ASTM specifications. Parts molded in Nylon 6/6, dry as molded, unmoisturized, at
73 F/23 C. Results are average of random parts tested. Data listed is for informational purposes only
shall not be used to establish specifications limits or used alone as the basis of design.

MACHINE SCREWS

SIZE
256
440
632
832
1024
1032
1/4-20

MAX TORQUE
BE FO R E
ULTIMATE
TENSILE TEST
T O R Q UE DEFORMATION YIELD LBS. BREAK LBS.

----- NO TEST --------- NO TEST --12-16 In Oz.

24 In Oz.
18-20 In Oz.
30 In Oz.
2-3 In Lbs.
5 In Lbs.
2-4 In Lbs.
6 In Lbs.
3-4 In Lbs.
7 In Lbs.
9-10 In Lbs.
13 In Lbs.

HEX NUTS

#1
TENSILE LBS.

SIZE

440
85
632
135
832
172
1024
211
1032
276
1/4-20
311
5/16-18
877
3/8-16
994
1/2-13
2,367
5/8-11
3,487
Test #1 Pull Test -Nylon Nut on Metal Screw

CAP SCREWS
SIZE

1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
246

MAX TORQUE
ULTIMATE
BEFORE
TORQUE DEFORMATION

19 In
37 In
49 In
11 Ft.
22 Ft.

MICRO PLASTICS I N C .

Lbs.
Lbs.
Lbs.
Lbs.
Lbs.

15-16 In
32-34 In
45-46 In
7-8 Ft.
18-19 Ft.

Lbs.
Lbs.
Lbs.
Lbs.
Lbs.

16
38
65
99
139
155
296

19
41
69
108
149
165
312

#2
TENSILE TORQUE
2
5.2
6.8
7
8
19.3
44.3
74

In
In
In
In
In
In
In
In

Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.

DOUBLE SHEAR
YIELD LBS. BREAK

--------------NO TEST ----45

50
91
97
158
164
187
257
234
241
413
432

RECOMMENDED TORQUE
BEFORE DEFORMATION
1.5
4
5
5.5
6.5
17
42
72

In
In
In
In
In
In
In
In

Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.

15.7 Ft Lbs.
13 Ft Lbs.
31.7 Ft.Lbs.
30 Ft Lbs.
Test #2 Torque on Nylon Nut on Metal Screw

TENSILE TEST
YIELD
LBS.
200
403
480
1393
2260

BREAK
LBS.
228
424
513
1425
2303

DOUBLE SHEAR

YIELD
LBS.
413
866
1108
2276
3340

BREAK
LBS.
432
880
1173
2313
3410

T E L E P H O N E : (870) 453-2261 F A X : (870) 453-8676 E M A I L : [email protected] W E B S I T E : www.microplastics.com

MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS

SECTION
MECHANICAL TEST DATA - METRIC
XX

Data listed is for informational purposes only shall not be used to

establish specifications limits or used alone as the basis of design

INFORMATION

MACHINE SCREWS
SIZE
M2 X .4
M2.5 X 45
M3 X .5
M3.5 X .6
M4 X .7
M5 X .8
M6 X .1
M8 X 1.25
M10 X 150

MAX TORQUE
ULTIMATE
BEFORE
TORQUE
DEFORMATION
NO TEST
NO TEST
NO TEST
NO TEST
.2-.26 Nm.
.32 Nm.
.28-.34 Nm.
.43 N.
.36-.43 Nm.
.45Nm.
.73-.79 Nm.
.93 Nm.
1.41-1.47 Nm.
1.83 Nm.
2.45-2.82 Nm.
3.39 Nm.
4.52 - 4.86 Nm.
5.31 Nm.

HEX NUTS
SIZE
M2
M2.5
M3
M3.5
M4
M5
M6
M8
M10

TENSILE

TENSILE TEST

YIELD
LBS.
7.12 N.
8.9 N.
22 N.
53 N.
214 N.
271 N.
845 N.
1.677 N.
2749 N.

NO TEST
135.23 N.
142.34 N.
369.20 N.
451.94 N.
940.35 N.
1556.65 N.
2597.76 N.
6283.11 N.

BREAK
LBS.
N/B
N/B
N/B
N/B
N/B
N/B
912 N.
1744 N.
N/B

DOUBLE SHEAR

YIELD
LBS.
89 N.
156 N.
294 N.
378 N.

600
1081
1806
2980
5026

N.
N.
N.
N.
N.

BREAK
LBS.
116 N.
169 N.
329 N.
405 N.
636 N.
1134 N.
1877 N.
3034 N.
5280 N.

ULTIMATE TORQUE
NO TEST
NO TEST
NO TEST
2.3 CM/KG
4.5 CM/KG
8.3
17.6 CM/KG
56.2 CM/KG
89.93 CM/KG

T E L E P H O N E : (870) 453-2261 F A X : (870) 453-8676 E M A I L : [email protected] W E B S I T E : www.microplastics.com

MICRO PLASTICS INC.

247

SECTION

XX

INFORMATION

PLASTIC MATERIALS PRINCIPAL PROPERTIES

FOR ADDITIONAL MATERIAL INFORMATION SEE OUR WEBSITE
http://www.microplastics.com/Materials/Material%20list.htm

NYLON 6/6 POLYAMIDE (PA)

General-purpose nylon 6/6 has good toughness, tensile strength, and resistance to creep, particularly in the high temperature range. Nylon has
excellent wear properties, low coefficient of friction, and exceptional chemical resistance particularly to aromatic hydrocarbons, greases, and oils.
Nylon is a hygroscopic material. Moisture acts as a plasticizer reducing the tensile strength, stuffiness, and increasing elongation, impact strength
, and energy absorbing characteristics. Outdoor weathering can be improved by the addition of carbon black. Nylon will perform well in long
range service in most applications at temperatures as high as 185 F (85 C). Nylon is a translucent off white color.
APPLICATIONS
Fasteners - Bearings - Gears - Cams - Gaskets - Printed Circuit Board Hardware - Washers - Spacers - Insulators - Spiral Wrap - Flexible
Grommeting - Wire Ties - Electronic Components - Bushings - Wiring Clips - Cable Clamps - Hole Plugs - Hose Clamps
QUALIFICATIONS
Mil - M20693B "A" Type 1
LP410A
ASTM
D4066 Type 1 Grade 2

Per ASTM

D789

NYLON 6/6 HEAT STABILIZED

Nylon 6/6 heat stabilized has the same mechanical properties as general purpose nylon 6/6 with the additional advantage of heat stabilization
this material can withstand 250 F (121 C) temperature in long range service in most applications. Heat stabilized nylon is off white in color.
APPLICATIONS
Fasteners - Bearings - Gears - Cams - Printed Circuit Board Hardware - Washers - Spacers - Insulators - Electronic Components - Bushings Strain Relief - Hole Plugs - Wiring Clips - Hose Clamps.
NYLON 6/6 IMPACT MODIFIED
Nylon 6/6 impact modified has the additional advantage of very high impact strength at low temperatures and enhanced resistance to heat distoration over general purpose nylon 6/6. Impact nylon 6/6 is off white in color.
APPLICATIONS
Fasteners - Bearings - Gears - Cams - Printed Circuit Board Hardware - Washers - Spacers - Insulators - Electronic Components - Bushings Requiring additional impact resistance.
NYLON 6/6 33 % GLASSFILLED
Glass-Reinforced nylon has outstanding property improvements over unreinforced compositions. Improvements include greater tensile strength,
deflection temperature, shear strength, improved creep resistance, better dimensional stability, and lower moisture absorption and thermal
expansion. The good wear resistance, electrical properties and low coefficient of friction of nylon 6/6 un-reinforced are retained. 33% glass-filled
nylon is opaque tan in color.
APPLICATIONS
Fasteners - Washers - Spacers - Insulators - Circuit Board Hardware - Requiring greater stiffness and strength.
NYLON 46 POLYAMIDE
High temperature nylon, which bridges the price performance cap between traditional nylons and high performance materials. Nylon 46 has
excellent short term and long term heat resistance, high stiffness at elevated temperatures, high creep resistance, outstanding toughness, excellent fatigue behavior, good chemical resistance, and higher continuous-use temperature. Nylon 46 is translucent off white in color.
APPLICATIONS
Fasteners - Bearings - Cams - Gears - Printed Circuit Board Hardware - Washers - Spacers - Insulators - Electronic Components - Bushings Wiring Clips - Cable Clamps - Hose Clamps.
NYLATRON GS
Nylon 66 with molybdenum disulphide (M0S2) solid lubricant added. Nylatron GS offers superior tensile and compressive strength, lower surface friction, higher heat resistance and greater dimensional stability than general purpose nylon 6/6. Nylatron is dark charcoal grey in color.
APPLICATIONS
Bushings - Bearings - Gears - Guides - Rollers - Washers
248

MICRO PLASTICS I N C .

T E L E P H O N E : (870) 453-2261 F A X : (870) 453-8676 E M A I L : [email protected] W E B S I T E : www.microplastics.com

PLASTIC MATERIALS PRINCIPAL PROPERTIES

FOR ADDITIONAL MATERIAL INFORMATION SEE OUR WEBSITE
http://www.microplastics.com/Materials/Material%20list.htm

SECTION

XX

INFORMATION

NYLON 66/6 COPOLYMER FLAME RETARDANT

Flame retardant nylon 66/6 has similar properties to general purpose 66 nylon with flame retardant additives for UL94V0 rating. Flame retardant
nylon 6/6 is opaque off white in color.
APPLICATIONS
Fasteners - Printed Circuit Board Hardware - Washers - Spacers - Insulators - Electric Components - Bushings - Strain Reliefs - Cable Clamps
- Wiring Clips.
ACETAL COPOLYMER (POM)
Acetal resins are characterized by there strength, stiffness, and hardness and are stable over a wide range of temperatures, humidity, environments, and stress. Acetal has high load bearing characteristics, excellent creep resistance, and low coefficient of friction. Acetal absorbs little
water, minimizing the effect of moisture on its physical properties. Acetal resists neutral oils, grease, petroleum-based fuels, many organic solvents, and alkalis. Oxidizing agents and acids, organic and inorganic, with PH less than four attack acetals. Compared to nylon acetal has better fatigue resistance, creep resistance, stiffness and water resistance, but lower impact strength and abrasion resistance. Acetal is translucent
off white in color. Acetal is widely used in pluming and irrigation because it resists scale build - up and has excellent thread strength, creep
resistance, and torque retention.
APPLICATIONS
Fasteners - Bearings - Gears - Cams - Washers - Spacers - Dowel Pins - Actuators
QUALIFICATIONS
NSF and FDA Approved.
HIGH-DENSITY POLYETHYLENE (HDPE)
Polyethylene is among the lowest density plastics and therefore is one of the lowest cost per cubic measure compared to other plastics. High
density polyethylene has good toughness, excellent electrical properties, and chemical resistance, good low temperature brittleness and very
low water absorption. Polyethylene is essentially inert, unaffected by strong and weak acids, alkalies, detergents, alcohols, and ketones.
Polyethylene has low tensile strength and is subject to considerable creep and stress relaxation under load. Polyethylene will swell with chlorinated and aromatic hydrocarbons including gasoline and oils.
APPLICATIONS
Washers - Spacers - Beaded Ties - Insulators - Wire Clips - Protective Caps - Plugs - Spiral Wrap Flexible Grommeting
POLYCARBONATE
(PC)
Polycarbonate is one of the toughest, most dimensionally stable thermoplastics over wide temperature range. Polycarbonate has exceptionally high impact strength. PC is unaffected by water below 140F and can be used in boiling water on a limited basis. PC is unaffected by greases, oils, detergents, aliphatic hydrocarbons, most mineral acids, and the higher alcohols. It is attacked by chlorinated hydrocarbons, and most
aromatic solvents, esters, and ketones. PC has white water transparency with a 90% light transmission.
APPLICATIONS
Fasteners, Washers, Spacers, Lenses, Housings.
POLYPROPYLENE
(PP)
Polypropylene has a good combination of rigidity and toughness, high rigidity at elevated temperatures, can be steam sterilized, good abrasion
resistance and low coefficient of friction, nonhydroscopic, excellent electrical properties, unique flex properties, good chemical resistance without stress cracking, one of the lowest densities, and high surface gloss. PP has the highest tensile strength of the olefins, high tensile modules,
and relatively low impact resistance. PP has good fatigue resistance, excellent abrasion resistance and very low coefficient of friction comparable to nylon. However, lubricating nylon surfaces reduces the friction much more than for polypropylene. Polypropylene has excellent chemical
resistance to dilute acids, concentrated acids (except oxidizing acids) alkalis, alcohols, detergents, and water. PP resists aromatic hydrocarbons,
chlorinated hydrocarbons, greases, and oils at room temperature but is attacked at about 140 F.
APPLICATIONS
Fasteners-Spacers-Washers-Insulators-Hinge Applications-Containers-Battery Cases-Pump Parts
IMPORTANT
While the descriptions, applications, data, and information contained in the above specifications are presented in good faith and believed to be
accurate, it is provided for guidance only. Because many factors affect application and use we recommend that you make tests to determine
the suitability of a product for your particular purpose prior to use.
T E L E P H O N E : (870) 453-2261 F A X : (870) 453-8676 E M A I L : [email protected] W E B S I T E : www.microplastics.com

MICRO PLASTICS INC.

249

SECTION

XX

PLASTIC MATERIALS PRINCIPAL PROPERTIES

INFORMATION

250

MICRO PLASTICS I N C .

T E L E P H O N E : (870) 453-2261 F A X : (870) 453-8676 E M A I L : [email protected] W E B S I T E : www.microplastics.com

PLASTIC MATERIALS PRINCIPAL PROPERTIES

SECTION

XX

INFORMATION

T E L E P H O N E : (870) 453-2261 F A X : (870) 453-8676 E M A I L : [email protected] W E B S I T E : www.microplastics.com

MICRO PLASTICS INC.

251