Additional Knots and Knot

Knowhow for CERT.

John R. Sanders
Westshore CERT

Objectives
1. To continue the skills learned in the Basic Knots
for CERT program. You will need the basic skills
knowledge to do this program.
2. Discuss some tricks of the trade to learn more
about ropes and knot systems.
3. Discuss construction of cordage and various
types of ropes.
4. To provide the member with additional knots
that are useful in the field.
5. To provide practical exercises that will be useful
to apply these new skills.

Tricks to learn how to tie knots.

Get a good book or app of knots and practice the
ones that interest you. This can get addicting since
there are so many great books out there.
General Knot Books
Ashleys Book of Knots
Morrow Book of Knots
The Ultimate Encyclopedia
of Knots & Ropework
Survival Manuals
Boy Scout Handbooks and
Pioneering Merit Badge Book

Decorative Knot Books

Paracord Fusion Ties
Volume 1 and 2 by J.D. Lensen
Decorative Fusion Knots
by J.D. Lensen

A few of my knot references.

Tricks to learn how to tie knots.

Develop personal ways to think
of knots like knots families or
knot uses families, then
practice that way.

Knot Families
Overhand knot
Granny Knot, Square Knot, Fishermans Knot, Overhand on a bight, Slip Knot, Overhand Knot
Square knotting (macram), Double Fisherman's Bend, Chain Sennet, Handcuff Knot, Solomon's
Bar
Fisherman's Loop, Double Chain Sennet, Surgeon's Knot, Marline Hitch
Figure 8 Knot
Figure 8 on a bight, Figure 8 Follow Through, Chain of 8s , Stevedore's Knot
Double Figure 8, Figure 8 Bend, Figure 8 on a bight
Half Hitch
Clove Hitch, 2 Half Hitches, French Whipping, Chimney Hitch, Tautline Hitch
Double French Whipping, Midshipman's Hitch, Quad. French Whipping, Rolling Hitch
Bowline
Bowline on a Bight, Running Bowline, Bowline on a coil, French Bowline, 3 Legged Bowline,
Spanish Bowline

The knot at the top of the family is the one that all the rest are based on.
There are more knots based on these but these are ones I commonly use.

Knot Family Cards

Knot Use Families

Joining ropes together:
Square Knot, Sheet Bend, Figure 8 Bend
Fishermans Knot, Double Fishermans Knot
Attaching a rope to a post:
Clove Hitch, Rolling Hitch, Slippery Clove Hitch
2 Half Hitches, Figure 8 Follow-through, Bowline, Timber Hitch

Making a Loop in a rope:

Overhand on a bight, Fishermans Loop
Figure 8 on a bight, Double Figure 8 on a Bight, Butterfly Knot
Bowline, Bowline on a Bight, 2 Half Hitches
Making an adjustable loop in a rope:
Tautline Hitch, Chimney Hitch, Pruisk Hitch
Develop you own groups of knots for these uses.
There are many other knots that will also work in these situations.

Knot Use Families Cards

Knots for joining ropes together.

Knots for attaching a rope to a post.

Knots for making a non-adjustable loop.

Knots for making an adjustable loop.

Tricks to learn how to tie knots.

Carry 10 feet of paracord to practice when you are
waiting in line or on a long trip. Its good for passing
the time and great exercise for your hands.
Tie all the knots in a knot family or use family without
looking. Then see if there is anything that you need to
practice. Then untie them again and try another group.

Tricks to learn how to tie knots.

Talk to someone who uses ropes and discuss what
knots they prefer and why.
They may also show you tricks they use like how to tie a
Clove Hitch in the middle of a rope by rolling the loops
in hand, stacking them then placing over the post.
4
3
2

Tricks to learn how to tie knots.

Teach someone how to tie knots. This causes
you to look at a skill a different way and helps
you learn more.

These knot boxes have

proven to be one of the
best ways to teach and
practice knots. They are
seen in some of the
pictures in this
presentation.
I have 5 knot boxes and
none of them are alike.

Tricks to learn how to tie knots.

Practice the knots you know by using them as much as
possible. The more you use them the more likely you
will use them. This will also help you find the ones you
prefer for different situations.
Setting up tents or shelters.
Tying down a load in a truck bed.
Securing a boat to a dock or post.
Games or tricks using knots.
Making decorative items to use.

Cordage Materials.
Natural Fiber Materials
Plant fibers such as flax, jute, hemp or cotton.
Animal fibers such as horse hair, camel hair, wool or
silk.
Typically spun first clockwise (right-handed) to
create strands, then 3 strands spun counterclockwise (left-handed) to create yarns, then 3
yarns spun clockwise again to form a typical rope.
Fibers Stands Yarns Lines Ropes Cables Hawsers.

Jute Twine

Sisal Twine

Bailing Twine

Natural
fiber
ropes

Cotton Twine
Fibers make strands

3 strands
make a yarn

3 yarns make a line

Cordage Materials.
Synthetic Fiber Materials
Kevlar, nylon, polyester, polyethylene and polypropylene
Typically the weight and twice the strength of natural
fiber lines of the same size.
Able to withstand a sudden shock loading.
Typically last 4 to 5 times longer than natural fiber
ropes.
Almost as strong when wet and rot resistant.
They are more susceptible to heat generated by friction.
They may be dyed a variety of colors.

Synthetic fiber ropes

Nylon Rope

550 Paracord
Polypropylene Cord

Cordage Construction
Laid rope
Twist and counter twist gives this rope its shape
and geometry.
Spinning with little tension produces a soft laid rope
that is more flexible and easier to tie knots in.
Spinning with more tension make a hard laid rope
that wears better but are stiffer.
Three strand rope is sometimes called hawser laid.
They can be left-hand laid (S-laid) or right-hand laid
(Z-laid) for the way the twists are set in the rope.

Laid
Ropes

Cordage Construction
Braided rope
This construction is rarer in natural fiber lines except in
the small sizes like sash cords or clothes lines.
This construction is more flexible, stretches less does
not impart a spin when loaded and will kink less than
laid rope.
Braided construction may be hollow or over a separate
core of laid or braided fibers. Braid on braid
construction is considered the strongest rope
construction technique.
Braided synthetic lines are considered the most versatile
of all ropes.

Braided Ropes

Cordage Construction
Sheath on core rope
Often called kernmantle construction that is used in
paracord and climbing ropes to mention a few.
Static kernmantle ropes have little stretch but are
designed for the wear and tear and occasional falls
of regular climbing or rescue ropes.
Dynamic kernmantle ropes have extra elasticity that
is useful in safety ropes in climbing.
The greater majority of the strength of the rope is in
the internal core ( the kern or core) and a lesser
amount is in the outer sheath (the mantle).

Sheath on Core Ropes

Kernmantle Ropes

Webbing.
Tubular webbing is a versatile alternative to cordage
in some uses. It is extremely strong and easy to tie
certain knots in.
Webbing in general is a woven product and come in
flat or tubular construction of various sizes.
Many rescue teams use this for anchor points,
slings, making ladders and securing victims into a
stretcher.
I use a roll of 1 tubular webbing as a throwing
rescue tool that unrolls with an easy underhand
toss. Tie a overhand knot in each end to keep it
from slipping from you hand or the victims hand.

Tubular
Webbing

Flat Webbing

Whipping or fusing cordage.

To prevent a rope from coming unraveled you can tie a
stopper knot (overhand or figure 8 knot) whip the ends or
fuse the ends in synthetic ropes.
Whipping is using a smaller cord to wrap the ends to
prevent them from unravelling. This is the preferred
method with natural fiber ropes.
Taping an end also works as a quick way to whip an end.
Fusing is where the synthetic rope is melted so that the
ends will not unravel. Cutting a synthetic rope with a hot
knife fuses the rope as it cuts. Melting the cut end with a
flame or soldering iron also works but be careful since
the melted material is extremely hot and may cause
severe burns.

Common Whipping

Taped

Fusing Synthetic Ropes

1. Make a bight in the whipping material.

3. Insert the running end through the loop.

5. Trim the ends so only a small amount

of the whipping cord shows.

2. Tightly wrap the running end around

the rope for about the diameter or the
rope.

4. Pull on the standing part of the whipping

cord until the running end goes under the
wraps.

Cowboy
Whipping

French
Whipping

Common
Whipping

Cutting Cordage
The easiest way to cut a rope is to whip or tape
it on either side of where you wish to cut it.
Then cut in the middle. If taped you can cut in
the middle of the tape as well.
In synthetic ropes using a hot knife or soldering
iron to melt the rope as you cut it also fuses the
rope.

Cut between two common

whippings

Cut in the middle of the tape.

Cut and fuse with a soldering iron or woodburner.

Knots we will cover in this program.

Figure 8 on a bight used to make a loop in a rope
that is extremely strong.
Bowline on a bight used to make 2 loops in a rope
that will not slip.
Water Knot used to tie webbing into a loop.
Fishermans Knot used to join to ropes together.
Double Fishermans Knot used to join to ropes
together where you need strength not the ability to
untie the knot.
Cleat Hitch used to secure a rope to a cleat.
Sheepshank used to shorten a rope where you
can untie it easily.

Fishermans Knot

Cleat Hitch
Figure 8
on a bight

Double
Fishermans
Knot

Sheepshank
Bowline on
a bight
Water Knot

Knots we will cover in this program.

Continued

Girth Hitch used to secure a rope to a ring.

Marlinespike Hitch used to make a temporary pulling
point in a rope.
Butterfly Knot used to make a loop in the center of a
rope.
Prusik Hitch used to have a movable attachment point
on a line by using Prusik Loop making a Prusik Hitch.
Truckers Hitch useful in applying tension across a load
to hold it in place.
Half Hitching useful in securing long objects like a roll of
carpet or tying a tarp to a pole with a line you do not
want to cut.

Half Hitching

Marlinespike Hitch

Girth Hitch

Prusik Hitch

Butterfly Knot

Truckers
Hitch

Figure 8 on a Bight
Used to make a loop in a
rope that will be able to take
a load yet is very strong.

1. Make a bight in the rope

2. Make an overhand loop with the bight.

3. Wrap the bight behind the doubled

rope.

4. Insert the running

bight through the loop.

5. Pull the
loop and the
doubled
rope.

Bowline on a Bight
Use to make 2 loops in a rope
for making a seat to lower
someone or tie off to a board
with a round turn in each loop
to make a bosun seat.

2. Make an overhand
loop with the bight.

4. Wrap the bight

down and under the
two loops

1. Make
a bight in
the rope.
3. Insert the
bight through
the loop .

5. Continue wrapping around the 2 loops to behind

the standing part of the rope

6. Pull the standing part

and the bight to set the
knot.

Water Knot
Used in tubular webbing to
make loops that are useful
for a variety of different
tasks.

1. Tie and overhand knot in the end of

the webbing.

3. Follow the knot around the original knot.

5. Leave a tail on both ends that are at least

the same as the diameter of the webbing.

2. Take the other webbing and insert it under

the tail of the first knot.

4. Continue around the knot

and insert it under the last
wrap of the original.

Fishermans Knot
Used to join two ropes together. They
can be the same size or different sizes.
If this is used in larger ropes it may be
untied easily but if it is in small ropes
like cords or fishing lines it may have
to be cut the knot out of the rope.

1. Lay the ends of the rope

parallel to each other.

2. Take one running end

under the other rope.

3. Tie an overhand knot

around the rope.

4. Take the second rope and 5. Tie an overhand knot

go under the first.
with this rope too.

6. Leave a tail after each

overhand knot.

7. Pull the ropes in opposite

directions to tighten

The finished
Fishermans Knot.

Double Fishermans Knot Barrel Knot

This is a stronger version of the

Fishermans Knot.
Used to join ropes together but will be
harder to untie if put under tension.
Used to make the Prusik Loops for the
Prusik Hitch.

1. Lay the ends parrallel

5. The running end goes

under the X.

2. Take one end down

across the other rope.

6. Leave a tail and pull

tight.

3. Around under both

ropes.

4. Around a second time

forming a X.

8. Repeat the process with

the other rope

9. Pull the knots together

and the knot is formed.

Cleat Hitch
This is the knot to use to
secure a boat to a cleat on
the dock or the boat. It may
also be used to tie off a flag
halyard to a cleat.

boat

boat

3
2
boat
boat

5
4
boat

boat

7
8

Sheepshank
Used to shorten a rope where you do not
want to cut it. It would also be useful in
the middle of a rope barrier to make it
more visible than the rope itself.
It may come untied if tension on the rope
is not maintained but it can easily be made
secure.

1. Determine how much the

rope needs to be shortened
and fold it into rough thirds.

4. Take the other running

end under opposite bight.

7. To prevent the knot from

coming undone draw the
ends through the bights.

2. Draw one end down

under one of the bights.

5. And down again form a

second half hitch.

3. Bring the running end up

to form a half hitch.

6. Apply tension across the

half hitches to secure the
knot

Another way is to place a

second half hitch on each
end.

Girth Hitch Cow Hitch Larks Head

So many names for this knot used to secure a rope to a
ring or horizontal rope.
It is used to secure the belly band on a saddle to the
girth ring, to secure a rope to the nose ring on a cow or
to secure a rope around a horizontal rope to help make
cloth or nets.
This knot would be used to attach a webbing loop to a
handle or bar to make a strap to pull with.

1. Form a bight in the rope.

2. Draw the bight through

the ring.

A. Pull the end from

under the
ring.

B. Pull the rope around

under the
ring.

3. Draw the ends through

the bight.

4. Pull tight to secure the

hitch.
D. Pull both ends to
tighten.

This knot may also be

tied using webbing
with either technique.

C. Pull the rope around

and over the
ring,
and down
through
the ring again.

Marlinespike Hitch
This is useful when you need to
pull on a rope by putting a handle
that is perpendicular to the pull.
This helps make lashings very tight
when it is used on the frappings.

1. Determine where you would like the

marlinespike hitch.

2. Make an underhand loop in the rope.

3. Draw the loop across the rope.

4. Take the marlinespike or stick and place it

over, under and over through the knot with
the pull so it will be against the overhand
knot that is formed.

5. The hitch will tighten down when pulled.

This hitch can also be used to make a ladder.

Butterfly Knot
This is useful when a loop in the
middle of a rope is needed. It will
not slip once tied properly.

1. In the position where you want a loop

make an overhand loop.

3. Roll the first loop under the rope.

5. Pull tight and the butterfly knot is formed.

2. Twist the loop a second time forming a

second loop.

4. Roll the loop over the rope and insert

through the second loop.

The completed butterfly knot.

Prusik Hitch
This is a climbing knot that allows a
moveable loop to be placed on a larger
rope.
It is useful in climbing, rope rescue or
tightening a load where a large rope is
used to secure the load.

1. Run the ends parallel to

each other.

2. Tie a double overhand

knot.

4. Pull tight to make a Pruisk

Loop.

5. Place the loop under the

rope. .

Notice the double fishermans knot is

on the side

6. Place the one end under

the other side.

7. Wrap at least 2 but

preferably 3 times around.

8. Ensure the wraps are inside

the previous ones.

9. Pull tight to lock the hitch. 10. To lock in place pull across
the
bar of the
Prusik Hitch

3. Tie a second double

overhand knot.

11. To slide the loop place it

perpendicular to the rope.

Truckers Hitch
This knot system can be used to
tighten a rope taut when making a
barrier or tighten down on a load or
covering.

Wrap the end around the

anchor point.

Take the running end

through the loop make by the
butterfly loop.

Make a secure loop in the rope

a distance from the anchor.
We are using a butterfly knot
here.

Pull tension on the rope and

secure with a tautline hitch.

Half Hitching
Half Hitching is useful when you need
to tie off a long load over its entire
length. It is useful when moving rugs
or other rolled items.

1. Tie a loop in the rope. We are using a

figure 8 on a bight here.

2. Make a slip knot and tie it around the end

of the object.

3. Make an underhand loop and slide over

the object.

4. Continue making half hitches so that 3

or 4 are evenly spaced along the object.

In large objects space the half hitches about

every foot.

5. Secure with a second half hitch making a

clove hitch.

Half Hitching using a figure 8 on a bight and

secured with a clove hitch.

Half Hitching using a timber hitch and a

tautline hitch.

Half hitching using webbing with an overhand

on a bight and a tautline hitch.

Application Exercises.
Using the knots in this program
and the Basic Knot Program,
describe what knots could be
used to do the following at the
places shown.

1. Making a barrier between trees.

You have been asked to make a rope barrier between 4 trees using
rope. You were instructed not to cut the ropes if possible and to make
the ropes as visible and tight as possible.
You have 3 50 feet ropes and the trees are 30 feet apart.
a. What knots would be used to tie off to the trees?
b. What knots could be used to shorten the ropes and make them
more visible?
c. What knots could be used to tighten the ropes?

Trees
a

2. Tying off a shelter to stakes.

You have been asked to tie down a shelter placed on the grass to some stakes
that have been provided. You have a spool of small synthetic rope, some duct
tape and 12 stakes. The diagram below shows how the stakes should be
placed but you are to decide how to tie off the ropes and tighten them.
a. What knots will you use to tie off to the shelter poles?
b. What knots will you use to tie off to the stakes?
c. How will you tighten the ropes?
d. If you were asked to make the ropes more visible, what could you do?
b

a
b

d
c

c
a

c
b

3. Securing a boat to the shore.

The CERT has been asked to help with a water festival at the Rocky River Boat
Ramps. While helping down at the docks a boat pulls up and asks that you tie
him off please. There is a cleat on the dock at the stern of the boat but not
one at the bow. There is a post at the bow though.
a. How would you tie the stern off?
b. How would you tie the bow off?
c. Someone up stream needs some help tying off to shore. There is a log
laying on the shore that you can tie off to. What knot would you use
here?
a

4. Moving a victim.
You are helping with moving a victim in a stretcher. The victim is extremely
heavy so you decide to drag him in the stretcher. You remembered you have
some webbing in your bag for just such a situation.
a. How will you secure the webbing to the stretcher?
b. What knot would be used to make a loop in the webbing?

5. Tying up a tent.
Following a big event where the team has been helping you see someone
having trouble moving a long cabin tent. They have managed to roll it into a
long cylinder that will not fit into the bag it came in. You ask if they have
anything to tie it up with. They produce a package of 50 feet of small rope.
a. What knot(s) would be best here?
b. Would webbing have been easier to use and why or why not?

Answers
1. Making a barrier between trees.
a. What knots would be used to tie off to the trees?
A clove hitch with a stopper knot or a bowline with a stopper knot
would work here.
b. What knots could be used to shorten the ropes and make them
more visible?
A sheepshank that has been secured would make a larger section in the
middle of the rope would both shorten the rope and make it more
visible.
c. What knots could be used to tighten the ropes?
A tautline hitch or a truckers hitch would both allow the rope to be
adjusted tight. The truckers hitch would stay tighter because of the
acute angle it can be tied off at no matter how large the tree is..

Truckers Hitch

Secured Sheepshank

Clove Hitch

2. Tying off a shelter to stakes.

a. What knots will you use to tie off to the shelter poles?
A bowline could be run around the pole in the expanding sections
at the corners. Leave a 2 to 3 inch tail or secure it with a stopper
knot to prevent slipping.
b. What knots will you use to tie off to the stakes?
A tautline hitch with a roundturn will be secure here.
c. How will you tighten the ropes?
The tautline hitch we used to secure the rope to thee stake also
allows us to tighten the rope.
d. If you were asked to make the ropes more visible, what could
you do?
A sheepshank in the middle of these ropes make them more
visible. This would be tied between the bowline of the top and
the tautline hitch on the bottom allowing room for the tautline to
tighten the rope.

Secured Bowline
with a round
turn on the post.
Tautline Hitch
with a round
turn on the
post.

Secured Sheepshank

3. Securing a boat to the shore.

a. How would you tie the stern off?
Using a cleat hitch is the proper knot here.
b. How would you tie the bow off?
A clove hitch will allow you to secure this quickly. If
there will be movement tie a stopper knot in the end
rope to secure it.
c. Someone up stream needs some help tying off to
shore. There is a log laying on the shore that you can
tie off to. What knot would you use here?
You could use a clove hitch here as well. A timber hitch
would also work here and be easier to untie when they
leave.

Cleat Hitch

Clove Hitch

Timber Hitch

4. Moving a victim.
a. How will you secure the webbing to the
stretcher?
A girth hitch will attach this to the bar handle at
the top of the stretcher.
a. What knot would be used to make a loop in
the webbing?
Use a water knot to make the loop in the
webbing and provide a wide handle to pull with
that will not pinch you hand as much.

Girth Hitch

Water Knot

5. Tying up a tent.
a. What knot(s) would be best here?
I would use some half hitching. A loop would be tied in the end
of the line either with a bowline or a figure 8 on a bight. Then
feed the other end through to make the slip knot around one
end. Tie a half hitch every foot or so along the tent until you are
about a foot from the other end. Tie your last half hitch and then
a tautline hitch to tighten the last loop and secure the tent.
b. Would webbing have been easier to use and why or why not?
Webbing would be easier on your hands when loading this heavy
object. All of the knots listed would work with webbing to.

Review of the Objectives.

1. To continue the skills learned in the Basic Knots for
CERT program. You will need the basic skills
knowledge to do this program.
2. Discuss some tricks of the trade to learn more about
ropes and knot systems.
3. Discuss construction of cordage and various types of
ropes.
4. To provide the member with additional knots that are
useful in the field.
5. To provide practical exercises that will be useful to
apply these new skills.
Did you learn something about each of these objectives?